ESP32-S3 Component Requirements
What other parts would I need to run this IC as intended?
Thought for 3 mins 29 sec
To properly support the ESP32-S3FH4R2, you’ll need the following passives and protection parts:
- 100nF 0603 Capacitor — decoupling capacitor close to each VDD pin
- 10 µF 6.3 V 0805 (C2012X5R0J106M085AB) — bulk decoupling on the 3.3 V rail
- CX2016DB40000D0FLJCC 40 MHz Crystal — main clock source
- CC0402JRNPO9BN180 18 pF C0G NP0 0402 — load capacitors for the 40 MHz crystal (×2)
- MWSA0603S-100MT 10 µH Inductor — LC filter on the analog 3.3 V rail
- TPD4E05U06DQAR — multi-channel ESD protection diode array on power/input lines
You can click Apply Changes to add these directly to your schematic.
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.