Haptic Motor Controller Replacement
Thought for 2 mins 7 sec
Got it — you want to swap to the Adafruit DRV2605L Haptic Motor Controller.
What I found:
- The exact Adafruit breakout Adafruit DRV2605L Haptic Motor Controller is not currently in the Flux library.
- Closest available parts in the library:
- DRV2605LDGS — TI DRV2605L IC, VSSOP-10 (bare IC).
- DRV2605L Haptic Controller — generic DRV2605L entry.
Your options:
- Replace with the bare IC DRV2605LDGS now. This is the same silicon as the Adafruit board, just not the breakout module.
- If you specifically need the Adafruit breakout module (with header pinout), request it be added or import it:
- Ask in Slack #request-a-part and follow this guide: https://docs.flux.ai/Introduction/parts-and-libraries--kicad-to-flux-#adding-parts-to-the-library-creating-a-part
Quick note: switching to the Adafruit breakout will change the pinout and footprint versus the bare IC.
How would you like to proceed?
- “Replace with DRV2605LDGS”
- “Hold — I’ll request the Adafruit part”
- Or tell me another preference
Use bare DRV2605L IC
Need Adafruit breakout
Confirm power and bus
Pick motor type
Pinout mapping help
