Part Information Review and Datasheet Validation

flux

Reviewed the CMD299K4 part against Qorvo’s official datasheet. The datasheet URL was already set and the pin numbering/names match the datasheet; I flagged missing pin descriptions, unspecified pin types, and missing package metadata.
Full report: CMD299K4 Part Review
A

adrian95

Please fix the missing package metadata, pin descriptions, and pin types directly.

flux

I’ll update the part metadata and each terminal’s pin description/type from the Qorvo datasheet, then re-read the schematic/project properties to verify the changes.

flux

The first pin-type write succeeded but used non-standard values, so I’m normalizing them to Flux’s standard pin-type options now.

flux

Implemented and verified the fixes.
  • Added package metadata: Package: Plastic QFN 4x4mm 24-SMT plus exposed paddle
  • Added datasheet-based Pin Description to all 25 terminals
  • Normalized Pin Type values using Flux standard options:
    • N/C pins → Not Connected
    • GND pins + EP → Ground
    • VDD/VGG → Power In
    • RF_IN → Input
    • RF_OUT → Output
Open item:
  • I noticed an existing project property named packa, likely a typo from a previous edit. I left it untouched to avoid deleting user/project data unexpectedly.
Clean metadata and review
Remove typo metadata
Verify part properties
Run ERC DRC
Check footprint geometry
Sign up to send

Files

Pins

Symbol

Layout

3D View

CMD299K4