Part Metadata Audit and Update

Worked for 2 mins 11 sec

Fixed the BQ25622RYKR symbol metadata to match the TI datasheet.

Changes made:

Renamed PMID_GD → PG
Renamed ILIM/D- → ILIM
Renamed TS_BIAS/D+ → TS_BIAS
Added datasheet-based pin descriptions for all 18 pins
Updated pin types using standard Flux values, including open-drain outputs as Open Collector, I²C SDA as Bi-Directional, and power pins as Power In / Power Out

I verified the final symbol: all 18 pin numbers, names, descriptions, and pin types are now aligned with the TI BQ25622 pin table.

adrian95

Please also create the parametric symbol and place each pin into the correct section based on the datasheet.

Thought for 15 sec

flux

I’ll convert the symbol metadata to parametric style, group pins into datasheet-based functional sections, and verify the section/order fields afterward.

Worked for 2 mins 8 sec

flux

Done. I set all 18 terminals to parametric-v1 and assigned datasheet-based sections, terminal order, and pin orientation.

Sections now used:

Power Supply: VBUS, PMID, BTST, SW, SYS, BAT, GND
Voltage Regulator: REGN, TS_BIAS
Control: ILIM, ~QON, PG, STAT, ~INT
Enable: ~CE
Analog: TS
Communication: SDA, SCL

Verified the updated symbol metadata after applying the changes.

Run ERC/DRC

Review control pins

Check power pin types

Add decoupling capacitors

Files

Pins

Symbol

Layout

3D View

GND

~INT

ILIM

~CE

PMID

~QON

REGN

STAT

SYS

SCL

VBUS

BTST

BAT

TS_BIAS

SDA

BQ25622RYKR