Part Datasheet Review and Validation

flux

I’ll inspect the part metadata and CAD data, find/update any missing official datasheet link, then compare symbol/footprint/pins against the datasheet and summarize mismatches.

flux

Review complete.
  • Datasheet URL is already set to the official ST URL: https://www.st.com/resource/en/datasheet/balfhb-wl-06d3.pdf
  • MPN/manufacturer match: BALFHB-WL-06D3, STMicroelectronics
  • Pin count matches: 8 pads/bumps
  • Symbol terminal mapping matches the datasheet pinout:
    • A1 RFO_in, A2 RFI_N_out, A3 RFI_P_out
    • B1 GND2, B2 GND3
    • C1 RFO_out, C2 GND1, C3 RFI_in
  • Key specs: 862–928 MHz, 50 Ω antenna-side Tx/Rx, STM32WL-matched differential Rx / Tx ports, integrated harmonic filter, CSPG 8-bump package, operating temp -40 to +105 °C, HBM ESD 2 kV.
Flagged mismatches:
  • Library/package property says QFN, but datasheet package is CSPG 8 bumps.
  • Part classification appears generic/incorrect: Integrated Circuits / Logic / AND; this should be an RF balun / RF filter front-end component.
  • Project checks report one unrelated issue: missing project documentation.
Fix metadata mismatches
Create project docs
Review footprint geometry
Update pin properties
Run focused checks
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    BALFHB-WL-06D3-thumb.png

    BALFHB-WL-06D3-thumb.png

    BALFHB-WL-06D3-thumbThumbnail
    BALFHB-WL-06D3

    BALFHB-WL-06D3

    BALFHB-WL-06D3 Symbol.svgDefault
    kicad_mod

    BALFHB-WL-06D3

    BALFHBWL06D3.kicad_modFootprint
    stp

    BALFHB-WL-06D3

    BALFHB-WL-06D3.stp3D Model

    BALFHB-WL-06D3

    BALFHB-WL-06D3 thumbnail
    50 Ω nominal input / conjugate match balun to QFN-2L STM32WL in low power mode, 862-928 MHz with integrated harmonic filter
    RF Balun 862MHz ~ 928MHz 8-WFBGA, CSPBGA
    Features • QFN STM32WL sub-GHz wireless microcontrollers impedance matched balun and Tx harmonics filter • Optimized for QFN STM32WL sub-GHz wireless microcontrollers in low power mode and dedicated to 2-layer PCB • 50 Ω nominal input / conjugate matched balun to QFN STM32WL • 50 Ω nominal impedance on antenna side Tx and Rx • Deep Tx rejection harmonic filter • Low insertion loss • Small footprint • Low profile ≤ 630 μm after reflow • High RF performance • RF BOM and area reduction • ECOPACK2 compliant component Applications • STM32WL sub-GHz wireless microcontrollers • LPWAN-compliant radio solution, enabling the following modulations: LoRa®, (G)FSK, (G)MSK, and BPSK

    Properties

    BALFHB-WL-06D3

    STMicroelectronics

    RF Balun

    st.com/resource/en/datasheet/balfhb-wl-06d3.pdf

    T

    parametric-v1

    CSPG 8 bumps

    creativecommons.org/licenses/by/4.0/

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls