Part Datasheet Review and Update

flux

The project already had a datasheet attached, and I also found the official Amphenol PDF URL. I’m updating the Datasheet URL to the official manufacturer link, then I’ll finish the symbol/footprint comparison.

flux

Reviewed ATF13-3P-BM03 against the available datasheet and official Amphenol source.
  • Existing part metadata matches: MPN ATF13-3P-BM03, manufacturer Amphenol Sine Systems, 3-pin right-angle AT receptacle, snap-fit/boardlock, tin plating.
  • Datasheet was already set, so no required update was needed. Official manufacturer URL found: https://www.amphenol-sine.com/pdf/datasheet/ATF13-3P-BM03.pdf
  • Key specs: 3 positions, 13 A, -55°C to +125°C, 1500 VAC dielectric withstand, 1000 MΩ min insulation resistance, IP67 mated, 100 mating cycles, mating plug AT06-3S*.
  • Symbol has three terminals A1, B1, C1, matching the 3-position connector.
  • Footprint includes three signal pads plus two boardlock/mount pads, matching the recommended PCB layout concept.
Mismatches / issues flagged:
  • Terminal Pin Type is currently Unspecified for A1/B1/C1; these should likely be set to passive/connector-style pins.
  • Terminal pin descriptions are not populated.
  • The project-level Datasheet URL still points to an uploaded PDF copy rather than the official Amphenol URL; the uploaded PDF content appears to be the correct datasheet, but the canonical manufacturer link is preferable if you want source traceability.
Fix pin metadata
Use official datasheet
Verify footprint dimensions
Run design review
Add key specs

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    ATF13-3P-BM03

    ATF13-3P-BM03

    ATF13-3P-BM03.stp3D Model
    svg

    ATF13-3P-BM03

    ATF13-3P-BM03 Symbol.svgDefault
    ATF13-3P-BM03-thumb.png

    ATF13-3P-BM03-thumb.png

    ATF13-3P-BM03-thumbThumbnail
    kicad_mod

    ATF13-3P-BM03

    ATF133PBM03.kicad_modFootprint

    ATF13-3P-BM03

    ATF13-3P-BM03 thumbnail
    Board Mount Header, Right Angle, AT, 3 Pin, Snap Fit, Tin plate
    ATF13-3P-BM03 is a 3-position right-angle board-mount connector from the Amphenol AT Series, designed for rugged automotive, industrial, and off-road applications. It features a PCB-mounted male header with BoardLock™ snap-fit retention, providing a secure connection and reliable performance in harsh environments. When mated with a compatible AT Series plug, the connector achieves an IP67 environmental sealing rating, making it suitable for dust- and water-resistant applications.
    Key Features 3-position right-angle PCB-mount male header BoardLock™ snap-fit retention for secure PCB installation IP67-rated sealing when mated with compatible connector Rated current: 13 A Rated voltage: 250 VDC Operating temperature range: −55°C to +125°C #16 contact system with copper-alloy contacts Tin-plated contacts with nickel underplate Thermoplastic housing for durability Suitable for automotive, industrial, and harsh-environment applications Through-hole solder termination 4.30 mm contact pitch
    #CommonPartsLibrary #Connector #Amphenol #ATSeries #BoardMountConnector #AutomotiveConnector #IndustrialConnector #IP67 #RightAngleConnector #PCBConnector #BoardLock #HarshEnvironment #Interconnects

    Properties

    ATF13-3P-BM03

    Amphenol Sine Systems

    Connectors

    amphenol-sine.com/pdf/datasheet/ATF13-3P-BM03.pdf

    J

    parametric-v1

    creativecommons.org/licenses/by/4.0/

    Pricing & Availability

    DPN

    Stock

    Qty 1

    3

    0

    $2.557

    1

    0

    $4.6828

    1

    95

    $4.19

    1

    34

    $4.55

    Controls