• Project name: 2242460430
• Description: Molex Connector Corporation / 2242460430
• Manufacturer Name: Molex
• Manufacturer Part Number: 2242460430
• Designator Prefix: J
• Part Type: Connectors
• Pads: 4
• Published Part UID: 5999652c-4f58-4806-9310-003e4208e2ed

• Footprint asset present: CONN04_2242460430_MOL.kicad_mod
• Layout contains 4 pads plus mechanical/silkscreen geometry.
• The rendered footprint visually shows a 2-by-2 through-hole header pattern consistent with a 4-circuit dual-row connector.

Micro-Fit+ Versa Color Vertical Header, Through Hole, 3.00mm Pitch, Dual Row, 4 Circuits, Tin (Sn) Plating, Glow-Wire Capable, Blue, Tray

• Connector Type: Header
• Contact Type: Male Pin
• Positions: 4
• Rows: 2
• Mounting: Through Hole
• Termination: Solder
• Contact Finish: Tin
• Voltage Rating: 600 VAC/DC
• Operating Temperature: -40°C to +105°C on DigiKey listing
• Packaging: Tray

• Expected: 4 circuits / 4 contacts.
• Found: 4 terminals with pin numbers 1, 2, 3, and 4.
• Result: Pass.

• Expected: Four numbered contacts for a 4-circuit connector.
• Found: Pins are numbered 1–4, no duplicates.
• Result: Pass for count and uniqueness.
• Caveat: The accessible datasheet/search content did not expose a detailed pin-1 physical numbering diagram, so I could not definitively verify the physical pin-number-to-pad-location mapping from the rendered footprint alone.

• Expected: Passive connector terminals are acceptable, but useful pin descriptions would identify each terminal as connector contact/circuit 1–4.
• Found: Pin Type is Passive; no explicit Pin Description fields were present.
• Result: Minor metadata gap, not an electrical mismatch.

• Expected: Micro-Fit+ Versa Color vertical through-hole, dual row, 3.00 mm pitch, 4 circuits, shrouded, blue, tray.
• Found: Project properties only state generic Part Type: Connectors; footprint asset name references 2242460430.
• Result: Partial. The footprint asset appears specific, but the project lacks richer searchable package/mechanical properties such as pitch, rows, orientation, mount style, and color.

• Expected: 4 through-hole pads in a 2-row 3.00 mm pitch arrangement with shrouded-header mechanical outline, PC tail support, and keyed/polarized geometry.
• Found: 4 pads and a through-hole header-like outline are present; the footprint asset name is specific to 2242460430.
• Result: Likely consistent at a high level.
• Caveat: The current inspection output did not expose exact pad drill, annular ring, plated slot/hole, or coordinate tables, so final mechanical validation against Molex’s recommended PCB layout remains incomplete.

1. Datasheet URL not present at project-level metadata
   The official URL was added to terminal component properties, but the project metadata still does not expose a part-level datasheet URL to the datasheet query tool.
2. Missing pin descriptions
   Terminals have pin numbers and passive type, but no explicit pin descriptions such as Circuit 1, Circuit 2, etc.
3. Sparse mechanical/package properties
   The project does not store key part specs as structured properties: 3.00 mm pitch, dual row, through-hole, vertical orientation, shrouded, blue LCP resin, tin plating, 4 circuits.
4. Footprint not fully mechanically verified
   The visible footprint matches the expected 4-pin dual-row through-hole concept, but exact pad/hole dimensions and pin-1 physical orientation were not conclusively checked because the accessible tool output did not include the full KiCad footprint text or detailed Molex PCB layout drawing.
5. Color discrepancy between sources
   Molex official series chart says Blue. DigiKey’s attribute extraction reported Black for insulation color. Treat Molex as authoritative; the Flux part should use Blue if color is captured.

• Add/ensure a true part-level Datasheet URL property: https://www.molex.com/en-us/products/part-detail/2242460430?display=pdf.
• Add terminal Pin Description fields:
  • Pin 1: Circuit 1 / Contact 1
  • Pin 2: Circuit 2 / Contact 2
  • Pin 3: Circuit 3 / Contact 3
  • Pin 4: Circuit 4 / Contact 4
• Add structured component/project metadata if supported:
  • Connector Type: Header
  • Connector Gender/Contact Type: Male Pin
  • Connector Pitch: 3.00 mm
  • Connector Positions: 4
  • Connector Rows: 2
  • Mount: Through Hole
  • Orientation: Vertical
  • Contact Finish: Tin
  • Resin Color: Blue
  • Operating Temperature: -40°C to +125°C
  • Voltage Rating: 600 VAC/DC, if using distributor listing as supplemental electrical rating
• Verify the footprint from the original .kicad_mod or Molex recommended PCB layout drawing for pad drill size, pad coordinates, mechanical keepout/body outline, and pin-1 orientation.