Part Review and Datasheet Update

flux

Completed the part review for Molex 2242460430 and created the full report in part-review-molex-2242460430. I found and added the official Molex datasheet/detail URL to the terminal Datasheet URL properties; the symbol has 4 passive pins numbered 1–4, matching the 4-circuit part.
Open items:
  • Project-level datasheet metadata still isn’t visible to the datasheet query tool.
  • Pin descriptions are missing.
  • Footprint appears broadly consistent, but exact pad/drill/pin-1 mechanical verification needs the full recommended PCB layout drawing or raw footprint text.
Suggested next steps:
  1. Add structured metadata: pitch, rows, mount, orientation, color, plating, ratings.
  2. Add pin descriptions for circuits 1–4.
  3. Verify the KiCad footprint dimensions against Molex’s recommended PCB layout.
A

adrian95

Add pin descriptions for circuits 1 through 4.

flux

I’ll add concise pin descriptions to the four connector terminals as Circuit 1 through Circuit 4, then verify the properties were applied.

flux

Added and verified pin descriptions for all four terminals:
  • Pin 1: Circuit 1 / Contact 1
  • Pin 2: Circuit 2 / Contact 2
  • Pin 3: Circuit 3 / Contact 3
  • Pin 4: Circuit 4 / Contact 4
Open items:
  • None for this request.
Suggested next steps:
  1. Add structured connector metadata like pitch, rows, voltage/current rating, and mount type.
  2. Run the part review checks again to confirm metadata completeness.
Add metadata and checks
Add connector metadata
Verify footprint dimensions
Run part checks
Update review document
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Description
Pin Orientation
Terminal Order
~
1
Passive
Terminal
Circuit 1 / Contact 1
Left
1
~
2
Passive
Terminal
Circuit 2 / Contact 2
Left
2
~
3
Passive
Terminal
Circuit 3 / Contact 3
Left
3
~
4
Passive
Terminal
Circuit 4 / Contact 4
Left
4

2242460430