Part Information Review

adrian95

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

2:39

Thought for 9 sec

Read BOM.

Read schematic.

Read layout.

Read layout.

Review complete: the official Datasheet URL was already set, so no update was needed. MPN/manufacturer, 2-pin symbol, and 2-pad footprint all match the datasheet; the only flagged items are low-severity metadata cleanup and optional terminal Pin Type changes from Unspecified to Passive. Full analysis is in the 1728853 Part Review project file.
Clean up metadata
Verify footprint dimensions
Run ERC/DRC
Update part description
Sign up to send

Refine this doc
Ask about this doc
1728853 Part Review
Scope and method
Reviewed current Flux part project data against the official Phoenix Contact PDF/product datasheet URL already present in the project: https://www.phoenixcontact.com/en-us/products/pcb-header-gmstba-25-hc-2-g-762-1728853?type=pdf.
The review followed the part-project datasheet sync procedure: verify Datasheet URL, extract official metadata, audit terminal elements, then compare symbol/footprint/pin data against the datasheet. The source-of-truth rule is to use datasheet-extracted pin numbers exactly and match pin count exactly, including all listed pins.
Current project information
Project properties

Table

FieldCurrent valueDatasheet/official valueStatus
Manufacturer Part Number17288531728853OK
Manufacturer NamePhoenix ContactPhoenix ContactOK
Part TypeConnectorsPCB header / ConnectorOK
Designator PrefixJConnector prefix JOK
Datasheet URLOfficial Phoenix Contact product PDF URL setOfficial Phoenix Contact URLOK — no web search/update needed
MountSolderWave soldering / through-holeAcceptable, but could be more specific as Through-hole / Wave soldering if desired
ComplianceGreenRoHS-compliant; color green (6021)Ambiguous: current property likely describes color, not compliance
Package or Case CodeNot present in contextNot a standard IC package; best library-style package description: Through-hole PCB header, 2-position, 7.62 mm pitchMissing/optional
Max CurrentNot present16 A nominal currentMissing/optional system property
Operating VoltageNot present630 V rated voltage (III/2); 500 V (III/3); 1000 V (II/2)Missing/optional; voltage category-dependent
Operating TemperatureNot present-40 °C to +100 °C operation, dependent on derating curveMissing/optional
Schematic symbol / terminals
Current schematic contains two Terminal components:

Table

Terminal designatorCurrent Pin NumberCurrent Pin TypeDatasheet expectationStatus
11UnspecifiedPosition/pin 1 of 2-position headerOK pin count/number; pin type acceptable as passive connector pin but could be improved
22UnspecifiedPosition/pin 2 of 2-position headerOK pin count/number; pin type acceptable as passive connector pin but could be improved
Notes:
  • Datasheet reports 2 positions, 2 connections, 2 potentials, 1 row, 1 solder pin per potential, for a total of 2 solder pins.
  • Manufacturer data does not assign functional names/descriptions beyond generic connector positions; using 1 and 2 as terminal labels is appropriate.
  • For a generic connector, Pin Type: Unspecified is not an electrical mismatch, but Passive would generally be clearer for ERC behavior if Flux accepts that value on terminal elements.
  • The part-project sync guidance recommends exact pin count matching and pin-number extraction from datasheet; this part satisfies the 2-pin count.
Footprint / layout assets
Project assets include:
  • 1728853.kicad_mod marked as footprint
  • 1728853.stp marked as 3D model
  • 1728853 Symbol.svg marked as default/thumbnail symbol
Layout currently exposes two pads (1 and 2) in the default footprint. This matches the datasheet pin count.
However, the layout tool output available in this review did not expose pad coordinates, plated-hole diameter, pad size, or exact mechanical dimensions, so the footprint geometry could only be cross-checked at the object-count/designator level, not dimensionally.
Datasheet-extracted key specs

Table

CategoryOfficial value
ManufacturerPhoenix Contact
MPN / item number1728853
Product nameGMSTBA 2,5 HC/ 2-G-7,62
Product typePCB header
Product familyGMSTBA 2,5 HC/..-G
Plug-in systemCOMBICON MSTB 2,5 HC
Positions / connections / potentials2 / 2 / 2
Rows1
Pitch7.62 mm
Pin layoutLinear pinning
Contact connection typePin
Mounting / solderingWave soldering, through-hole
Solder pins per potential1
Nominal current16 A
Nominal voltage630 V
Rated voltage III/3500 V
Rated voltage III/2630 V
Rated voltage II/21000 V
Rated surge voltage6 kV
Nominal cross-section2.5 mm²
Contact resistance0.6 mΩ
Contact surfaceSn
Contact materialCu alloy
Housing colorGreen (6021)
Insulating materialPA, UL 94 V0
Operating temperature-40 °C to +100 °C, dependent on derating curve
Storage/transport temperature-40 °C to +70 °C
Width15.24 mm
Length/depth12 mm
Height11.8 mm
Installed height8.57 mm
Solder pin length P3.23 mm
Pin dimensions1 × 1 mm
PCB hole diameter1.4 mm
Cross-check results
Passes
  1. Datasheet URL present — official Phoenix Contact PDF/product datasheet URL is already set; no web search/update was required.
  2. MPN/manufacturer match — project uses MPN 1728853 and manufacturer Phoenix Contact, matching datasheet.
  3. Pin count matches — datasheet has 2 solder pins/positions; schematic has exactly 2 terminal elements; footprint has exactly 2 pads.
  4. Terminal numbering matches — terminals are numbered 1 and 2, matching expected position numbering for a 2-position header.
  5. Designator prefix is appropriate — J is appropriate for connectors.
  6. Assets present — symbol, KiCad footprint, and STEP model are all present.
Mismatches / issues to flag

Table

SeverityFindingWhy it mattersRecommendation
LowTerminal Pin Type values are UnspecifiedFor a passive connector, this is not a datasheet mismatch, but ERC behavior/readability may be better with Passive.Consider setting both terminal pin types to Passive and adding short descriptions like Connector position 1 / Connector position 2.
LowCompliance: Green is ambiguousDatasheet says color is green and RoHS compliance is yes; current property name suggests regulatory compliance, while value says color.If keeping Compliance, use RoHS compliant; if recording color, use a color/material property instead.
LowMissing optional metadata propertiesCurrent part lacks normalized properties for package/footprint description, Max Current, Operating Voltage, Operating Temperature.Add only standard system properties if desired: Package or Case Code, Max Current = 16 A, Operating Temperature = -40°C to +100°C. Voltage should be chosen carefully because ratings depend on overvoltage/pollution category.
InfoFootprint dimensional check is incompleteTool output confirmed two pads but did not expose pad pitch, drill, pad size, or body outline dimensions.Manually verify the KiCad footprint uses 7.62 mm pitch, 1.4 mm holes for 1 × 1 mm pins, and body outline ~15.24 mm × 12 mm.
  1. Set both terminal Pin Type properties from Unspecified to Passive.
  2. Add terminal Pin Description values:
    • Pin 1: Connector position 1
    • Pin 2: Connector position 2
  3. Optionally add project-level properties:
    • Package or Case Code: Through-hole PCB header, 2-position, 7.62 mm pitch
    • Max Current: 16 A
    • Operating Temperature: -40°C to +100°C
    • Leave Operating Voltage unchanged unless you want a specific rating category captured, because the datasheet gives multiple category-specific voltage ratings.
  4. Optionally clarify Compliance vs color:
    • Change Compliance to RoHS compliant, or
    • Preserve Compliance and add/maintain a separate color/material property manually.
Overall verdict
The part is broadly correct: official datasheet URL is set, MPN/manufacturer match, schematic has exactly two terminals, and the footprint exposes exactly two pads. No major symbol/pin-count mismatch was found. The only actionable improvements are metadata cleanup and changing generic connector pin types from Unspecified to Passive for clarity.

    Scope and method

    Current project information

    Project properties

    Schematic symbol / terminals

    Footprint / layout assets

    Datasheet-extracted key specs

    Cross-check results

    Passes

    Mismatches / issues to flag

    Recommended updates, if you want me to apply them

    Overall verdict

Documents

    1728853 Part Review

Assets

1728853

1728853

1728853 Symbol.svgDefault
kicad_mod

1728853

1728853.kicad_modFootprint
stp

1728853

1728853.stp3D Model
1728853-thumb.png

1728853-thumb.png

1728853-thumbThumbnail

1728853

1728853 thumbnail
2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.300" (7.62mm) 90°, Right Angle Through Hole
The 1728853 is a PCB-mounted terminal block header from Phoenix Contact, part of the COMBICON GMSTBA series. It is designed for secure and reliable wire-to-board connections in industrial and electronic applications.
This component is a 2-position pluggable terminal block header with male pins, typically used together with a mating plug connector to allow easy wiring and maintenance. It is mounted on a PCB using through-hole soldering and features a right-angle orientation for compact layouts.
Key Features Connector Type: PCB terminal block header (male pins) Number of Positions: 2 pins (single row) Pitch: 7.62 mm (0.300") Mounting Type: Through-hole (wave soldering) Orientation: Right-angle (90°) Rated Current: up to 16 A Rated Voltage: up to 630 V (IEC) Contact Material/Finish: Tin-plated contacts Housing Material: Polyamide (PA), green color Flammability Rating: UL94 V-0 Connection System: Pluggable (mates with compatible COMBICON plugs)
Typical Applications Industrial control systems Power distribution boards Embedded and automation electronics Devices requiring detachable wiring connections

Properties

1728853

Phoenix Contact

Connectors

phoenixcontact.com/en-us/products/pcb-header-gmstba-25-hc-2-g-762-1728853?type=pdf

J

Solder

Green

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls