Part Information Review

adrian95

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

4:05

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

Thought for a moment

I reviewed the part and set the official NorComp datasheet URL on the project. The main flags are that terminals/pads 37–38 appear to be mechanical shell/mounting pads beyond the 36 signal contacts, and all terminal pin types/descriptions are currently unspecified; full details are in Part Information Review — 112-036-213R001.
Fix terminal metadata
Verify footprint numbering
Run ERC/DRC
Document shell pads

Set Datasheet URL to "https://content.norcomp.net/r..."

0:03

Set Datasheet URL to "https://content.norcomp.net/rohspdfs/SCSI-050Ribbon/11Y/112/112-YYY-213RYY1.pdf"

Created project doc "Part Information Review — 112-036-213R001"

Sign up to send

Refine this doc
Ask about this doc
Part Information Review — 112-036-213R001
Scope
Reviewed the current part project information, project properties, schematic terminal symbol, PCB footprint asset, and the official NorComp datasheet for 112-036-213R001.
Official datasheet now set on the project:
https://content.norcomp.net/rohspdfs/SCSI-050Ribbon/11Y/112/112-YYY-213RYY1.pdf
Current project metadata

Table

FieldCurrent / observed valueDatasheet / source cross-checkResult
Manufacturer Part Number112-036-213R001112-036-213R001Pass
Manufacturer NameNorCompNorCompPass
Part TypeConnectorsConnector / 0.085 in ribbon R/A board mountPass
Designator PrefixJConnector prefixPass
MountThrough HoleDIP solder / right-angle board mountPass
Datasheet URLAdded official NorComp PDFOfficial NorComp PDFUpdated
Package / Case CodeNot explicitly set as a project propertyRight-angle through-hole / DIP solder SCSI ribbon connectorFlag: missing package-style property if desired
Description36-position SCSI/Centronics-style female receptacle, right-angle through-hole with bail-lock / 4-40 threaded flangeDatasheet confirms 36 positions, female, DIP solder, nickel shell, 4-40 thread option, gold flash mating area with tin tailsMostly pass; description is richer than datasheet text but consistent
Key datasheet specs extracted

Table

SpecDatasheet value
Series / drawing112-YYY-213RYY1
Description0.085 in ribbon right-angle board mount
Positions for this MPN036 / 36 positions
Gender code2 = Female
Termination code1 = DIP solder
Shell plating code3 = Nickel
Hardware code00 = 4-40 thread
Plating option1 = Gold flash mating area with tin tails
Current rating1 A
Voltage rating500 VAC
Insulation resistance5000 MΩ min.
Dielectric withstand1000 VAC for 1 minute
Operating temperature-55°C to +105°C
Compliance noteRoHS compliant, high-temp process
Schematic symbol / terminal audit
Observed
  • The schematic contains 38 terminal components.
  • Terminals 1–36 exist and their Pin Number properties match their designators.
  • Terminals 37 and 38 also exist.
  • All terminal Pin Type values are currently Unspecified.
  • No Pin Description properties were found on the terminals.
Cross-check against datasheet
  • The datasheet identifies this as a 36-position connector.
  • The extra terminals 37 and 38 appear to correspond to the two large mechanical mounting / shell holes in the footprint, not to signal contacts.
  • That is acceptable if intentionally modeled as shield/mechanical terminals, but they should be documented clearly.
Symbol mismatches / flags

Table

SeverityItemDetailsSuggested fix
WarningPin descriptions missingTerminals 1–36 have no Pin Description; terminals 37–38 also lack descriptions.Add descriptions such as Signal Contact for 1–36 and Mounting Shell / Shield for 37–38.
WarningPin types all unspecifiedAll terminals have Pin Type: Unspecified. For a passive connector this is not functionally wrong, but it reduces ERC clarity.Set 1–36 to Passive; set 37–38 to Passive, Ground, or a project-defined shield convention depending on desired use.
Info / possible mismatch38 schematic terminals vs. 36-position datasheetDatasheet has 36 electrical contacts. Footprint includes two additional mounting/shield pads.Keep 37–38 only if they represent shell/mounting pads; otherwise remove or mark as mechanical/shield.
PCB footprint audit
Observed footprint asset
  • Footprint asset: 112036213R001.kicad_mod
  • Footprint description: 112-036-213R001-1
  • Through-hole signal pads: 1–36
  • Two larger through-hole pads: 37–38
  • Signal pad drill: 1.0 mm
  • Signal pad copper diameter: 1.5 mm
  • Mounting/shield pad drill: 3.2 mm
  • Mounting/shield pad copper diameter: 4.8 mm
  • Signal pad pitch along row: 2.16 mm, matching 0.085 in pitch.
  • Row-to-row offset: 4.29 mm.
  • Mounting/shield pads are at approximately x = -48.23 mm and x = 11.51 mm, both at row midpoint.
Cross-check
The footprint’s 36 contact pads align with the 36-position version. The two large additional pads match the connector’s mechanical mounting / shell feature concept and are likely intentional.
Footprint mismatches / flags

Table

SeverityItemDetailsSuggested fix
InfoExtra pads 37–38Footprint contains two large through-hole pads beyond the 36 signal contacts.Keep if these represent shell/mounting pads; add schematic descriptions and pin type convention.
WarningElectrical rating property inconsistencyProject context/distributor data mentioned 5 A / 250 VAC in one place, while the NorComp datasheet reports 1 A / 500 VAC.Prefer the NorComp datasheet values: 1 A, 500 VAC, unless another official NorComp product-specific source overrides it.
InfoNo explicit package/case propertyProject has Mount: Through Hole but no clear package/case field.Consider adding Package or Package or Case Code: Right Angle Through-Hole SCSI Ribbon Receptacle, 36 Position.
Overall result
The part is generally consistent with the official NorComp datasheet: MPN, manufacturer, part type, 36 signal positions, right-angle through-hole/DIP solder footprint, and connector description all align. The main cleanup items are metadata completeness and terminal clarity: add pin descriptions/types, and explicitly document terminals/pads 37–38 as shell or mounting pads if they are intended to remain in the symbol.

    Scope

    Current project metadata

    Key datasheet specs extracted

    Schematic symbol / terminal audit

    Observed

    Cross-check against datasheet

    Symbol mismatches / flags

    PCB footprint audit

    Observed footprint asset

    Cross-check

    Footprint mismatches / flags

    Overall result

Documents

    Part Information Review — 112-036-213R001

Assets

kicad_mod

112-036-213R001

112036213R001.kicad_modFootprint
112-036-213R001

112-036-213R001

112-036-213R001 Symbol.svgDefault
112-036-213R001-thumb.png

112-036-213R001-thumb.png

112-036-213R001-thumbThumbnail

112-036-213R001

112-036-213R001 thumbnail
36 Position Receptacle Connector SCSI Through Hole, Right Angle Solder
The 112-036-213R001 is a 36-position SCSI Centronics-style female receptacle connector designed for board-mounted I/O and high-reliability cable-to-board connections. It is part of the NorComp 112 series and is commonly used in industrial, computing, and communication equipment where rugged parallel signal interfaces are required.
It features a right-angle through-hole PCB mount design with a metal shell and bail-lock mechanism to ensure secure mating and resistance to vibration and accidental disconnects.
Key Features 36-position (2-row) Centronics / SCSI interface Female receptacle connector Right-angle through-hole PCB mounting Bail-lock mechanism for secure retention Outer shell / shrouded contact design Gold-plated contacts for reliable low-resistance connection 4-40 threaded flange for mechanical mounting Designed for cable-to-board I/O applications Electrical & Mechanical Highlights Number of contacts: 36 Contact arrangement: dual-row Contact finish: gold flash plating Mounting: PCB through-hole, right-angle Locking: metal bail latch system Connector type: SCSI / Centronics style I/O connector Typical Applications Industrial controllers Legacy computing / SCSI equipment Printers and scanners Measurement and test equipment High-reliability board I/O interfaces #CommonPartsLibrary #Connector

Properties

112-036-213R001

NorComp

Connectors

content.norcomp.net/rohspdfs/SCSI-050Ribbon/11Y/112/112-YYY-213RYY1.pdf

J

Through Hole

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls