Part Review and Datasheet Update

flux

The part already has a Datasheet URL set, so I’m not overwriting it; I found the official TE product page and customer drawing links for comparison.

flux

Completed the part review and created a detailed report: part-metadata-review-te-connectivity-104128-1.
Summary: the 10-pin, 2-row, 2.54 mm through-hole footprint and pad pattern are consistent with TE Connectivity 104128-1. I did not overwrite the Datasheet URL because one was already set, but I found the official TE product page/customer drawing for comparison.
Open items:
  • Manufacturer Name property appears incorrect; it should be TE Connectivity.
  • Pin descriptions are missing.
  • Pin Type is currently Unspecified; Passive would be cleaner for connector contacts.
  • Existing Datasheet URL is an uploaded PDF, not the official TE URL.
Suggested next steps:
  1. Update metadata cleanup items.
  2. Add pin descriptions Position 1 through Position 10.
  3. Optionally replace the Datasheet URL with the official TE customer drawing URL.
Fix metadata and pins
Correct manufacturer name
Add pin descriptions
Set pins passive
Run final review

Refine this doc
Ask about this doc
Part Review: TE Connectivity 104128-1
Reviewed Project Metadata
Note: The user requested updating the Datasheet property only if no datasheet URL was already set. A Datasheet URL was already present, so it was not changed.
Key Datasheet Specs
  • Series: AMP-LATCH / AMP-LATCH - NOVO
  • Connector style: Low-profile shrouded/latching ribbon-cable header assembly
  • Positions: 10
  • Rows: 2
  • Array: 2 × 5
  • Pitch: 2.54 mm / 0.100 in
  • Row spacing: 2.54 mm / 0.100 in
  • Mounting: Through-hole solder, board mount
  • Orientation: Vertical / straight
  • Contact type: Male square pin
  • Post size: 0.64 mm / 0.025 in square
  • Recommended PCB hole diameter: Ø0.035 ± 0.003 in typical
  • Current rating: 1 A per contact
  • Voltage rating: 250 VAC
  • Operating temperature: -65 °C to +105 °C
  • Housing: glass-filled nylon, black, UL 94V-0
  • Packaging: tray; TE listed packaging quantity 120
Schematic Symbol Check
Observed Flux symbol terminals:

Table

TerminalPin Number propertyPin TypeNotes
11UnspecifiedPresent
22UnspecifiedPresent
33UnspecifiedPresent
44UnspecifiedPresent
55UnspecifiedPresent
66UnspecifiedPresent
77UnspecifiedPresent
88UnspecifiedPresent
99UnspecifiedPresent
1010UnspecifiedPresent
Result: The schematic symbol has 10 terminals matching the datasheet position count. Pin type Unspecified is acceptable for a passive connector unless the library convention requires passive/input/output typing. No electrical pin-function mismatch was found because the datasheet does not assign functional signals to pins.
Footprint Check
Observed footprint data:
  • 10 PCB pads are present, numbered 1 through 10.
  • Silk/fab outline is present.
  • Footprint outline spans approximately 20.32 mm in length, matching the datasheet connector length of 0.800 in / 20.32 mm.
  • Silk/fab outline height shown is approximately 9.14 mm for the body rectangle plus a larger courtyard-like outline of approximately 11.14 mm. This appears directionally consistent with a shrouded header body, but the exact mechanical interpretation should be verified against TE's customer drawing if enclosure/mechanical clearance is critical.
Limitations: The available layout inspection output confirmed pad count and outline but did not expose pad drill diameter, pad size, or exact pad coordinates. Therefore, the recommended Ø0.035 ± 0.003 in hole size and 2.54 mm pitch could not be fully verified from the readback.
Mismatches / Flags
  1. Mount property is incomplete: Flux property is Solder; datasheet calls out board-mount, through-hole solder. Prefer Through Hole / Through-Hole Solder if the part property model supports it.
  2. Description is broadly correct but omits key details: Current description says Conn Ejector Header HDR 10 POS 2.54mm Solder ST Thru-Hole Automotive Tray; this matches the core part, but could be improved to mention TE AMP-LATCH low-profile shrouded vertical header, 2×5, ejection latch.
  3. Pin descriptions are absent: Terminals only have pin numbers and unspecified type; this is not wrong for a generic connector, but adding descriptions like Position 1 … Position 10 would make the symbol clearer.
  4. Footprint drill/pitch not fully verifiable from tool readback: Pad count matches, and the outline length matches the datasheet, but drill diameter and pad spacing were not visible in the retrieved footprint data.
  5. Datasheet URL is not the official TE URL: A datasheet URL exists, but it points to a Flux-hosted uploaded PDF. The official TE customer drawing URL above is the preferred design reference if you want the project property to point directly to TE.
Overall Assessment
The part is very likely the correct TE Connectivity 104128-1: 10-position, 2-row, 2.54 mm AMP-LATCH low-profile vertical through-hole ejector/latching header. The schematic terminal count and footprint pad count match the datasheet. The main cleanup items are property precision, optional pin descriptions, and confirming/updating the Datasheet URL to TE's official customer drawing if desired.

  • Reviewed Project Metadata

  • Key Datasheet Specs

  • Schematic Symbol Check

  • Footprint Check

  • Mismatches / Flags

  • Overall Assessment

Documents

  • Part Review: TE Connectivity 104128-1

  • Part Metadata Review — TE Connectivity 104128-1

Assets

stp

104128-1

104128-1.stp3D Model
104128-1

104128-1

104128-1 Symbol.svgDefault
kicad_mod

104128-1

1041281.kicad_modFootprint
104128-1-thumb.png

104128-1-thumb.png

104128-1-thumbThumbnail

104128-1

104128-1 thumbnail
Connector Header Through Hole 10 position 0.100" (2.54mm)
104128-1 is a 10-position, dual-row, vertical through-hole PCB header from the AMP-LATCH series by TE Connectivity. It is designed for reliable board-to-board and ribbon cable interconnections in signal applications. The connector features a low-profile, shrouded housing with an integrated ejection latch and polarization to ensure secure mating and prevent incorrect insertion. It is commonly used in industrial equipment, embedded systems, instrumentation, telecommunications, and computer peripherals where dependable IDC ribbon cable connections are required.
10-position, 2-row connector 2.54 mm (0.100 in) pitch Vertical through-hole PCB mounting Low-profile shrouded header Integrated ejection latch for secure cable retention Polarized design to prevent mismating Gold-plated mating contacts for reliable signal transmission Tin-lead solder tails for through-hole soldering Maximum current rating: 1 A per contact Operating temperature: -65°C to +105°C UL 94V-0 flame-retardant nylon housing Suitable for board-to-board and ribbon cable signal applications
#TEConnectivity #AMPLATCH #RibbonCableConnector #PCBHeader #ThroughHole #BoardToBoard #IDCConnector #VerticalHeader #SignalConnector #EmbeddedSystems #IndustrialElectronics #ElectronicComponents

Properties

104128-1

Connector Header Through Hole 10 position 0.100" (2.54mm)

Connectors

componentsearchengine.com/Datasheets/1/104128-1.pdf

J

Solder

parametric-v1

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls