Part Data Review and Datasheet Update

flux

I’ll review the part metadata, find and attach the official datasheet if needed, then compare symbol, footprint, and pin details against the datasheet.

flux

I found an official Molex series-chart entry and customer drawing link; I’m resolving conflicting product-page scrape data before finalizing the review.

flux

Reviewed Molex 460071102 and added the official Molex customer drawing as the part’s Datasheet URL. I documented the full review in part-review-molex-460071102.
Open items:
  • Pin descriptions are missing for the four schematic terminals.
  • Full pad-coordinate verification needs a manual check against the Molex PDF because PDF extraction failed.
  • One Molex product-page scrape returned conflicting Mini-Fit data; the official 46007 series chart supports this as a 2-circuit Sabre right-angle header.
Suggested next steps:
  1. Add terminal pin descriptions for 1_1, 1_2, 2_1, and 2_2.
  2. Manually verify footprint hole pattern against the customer drawing.
  3. Populate connector properties like pitch, rows, positions, mount, orientation, and temperature range.
Add pin descriptions
Verify footprint manually
Populate connector properties
Fix all flagged issues
Check electrical grouping
Sign up to send

Refine this doc
Ask about this doc
Part Review: Molex 460071102
Reviewed part metadata
  • Project / part name: 460071102
  • Published part UID: 8b0b55bd-ca4c-4172-a52e-255da93ab08f
  • Manufacturer Part Number: 460071102
  • Alternate Molex format: 46007-1102 / 0460071102
  • Manufacturer: Molex
  • Description in project: A1 Manufacturer Recommendations, 13.54 mm, Molex
  • Designator prefix: J
  • BOM items: none, because this is a published part project made from terminals/pads rather than a design containing an instantiated connector.
  • Schematic terminals: 4 terminal components
    • Pin Number 1_1, Passive
    • Pin Number 1_2, Passive
    • Pin Number 2_1, Passive
    • Pin Number 2_2, Passive
  • Footprint: 4 through-hole pads, with fabrication text PTH D1.78 +/- 0.08; footprint outline/silkscreen present.
  • Assets: no separate uploaded symbol/footprint/3D assets found.
Datasheet / official source
The Datasheet URL property was added to the part project:
https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/460/46007/460071103_sd.pdf
Official Molex references found:
Note: the direct PDF extraction tools errored on the Molex PDFs, so the strongest extracted data source was the official Molex 46007 series chart plus the official drawing URL discovered by web search.
Key specs from official Molex series-chart data
  • Series: Molex 46007
  • Product: Sabre right-angle header
  • Pitch: 7.50 mm mating interface / 7.50 mm termination interface
  • Circuits loaded / maximum: 2 / 2
  • Rows: 1
  • Gender: male
  • Mounting style: through hole
  • Orientation: right angle
  • PC tail length: 3.81 mm
  • Recommended PCB thickness: 1.60 mm
  • Board lock / PCB retention: no board lock
  • PCB locator: no
  • Glow-wire capable: yes
  • Finger-proof: complies with UL1977 finger-proof access requirement
  • Resin: black nylon, UL94V-0
  • Metal: brass
  • Plating: tin mating and tin termination, 1.520 µm minimum
  • Operating temperature: -40 °C to +105 °C
  • Durability: 25 mating cycles maximum
  • Packaging: bag
  • Net weight: 3.051 g
Cross-check results
Schematic symbol
Pass with note.
  • The symbol uses four schematic terminals named 1_1, 1_2, 2_1, and 2_2.
  • For a 2-circuit Sabre header with two solder tails per circuit, this appears intentional: two physical PCB tails belong to circuit 1 and two physical PCB tails belong to circuit 2.
  • Pin type is Passive, which is appropriate for a connector.
Mismatches / improvements:
  • Pin descriptions are missing. Add descriptions such as Circuit 1 solder tail A, Circuit 1 solder tail B, Circuit 2 solder tail A, and Circuit 2 solder tail B or equivalent.
  • Consider documenting that 1_1 and 1_2 are the same electrical circuit, and 2_1 and 2_2 are the same electrical circuit. The current part has zero nets because it is a part project, so this may not be represented as connectivity unless the part-authoring workflow supports internal shorted pins / jumper pins.
Footprint
Mostly pass, with one unresolved item.
  • The footprint contains four PTH pads, matching the expected two-tail-per-circuit construction implied by the four terminal pins.
  • Fabrication text states PTH D1.78 +/- 0.08, consistent with the visible hole callout.
  • The footprint includes a right-angle style body outline and silkscreen/fab geometry.
Mismatches / improvements:
  • I could not fully verify every X/Y pad coordinate against the Molex customer drawing because direct PDF extraction failed. The project description includes 13.54 mm, and the official drawing should be used to confirm the full recommended hole pattern.
  • The part has no separate footprint asset listed, only layout nodes in the project.
Part properties
Pass on core identity after update.
  • MPN and manufacturer match Molex official data.
  • Datasheet URL has been added.
Mismatches / improvements:
  • The current description is too terse; recommended description: Molex Sabre 46007 right-angle through-hole header, 7.50 mm pitch, 2 circuits, glow-wire capable, 3.81 mm tails, for 1.60 mm PCB, no board lock.
  • Package / mount / connector properties are not explicitly populated in project metadata. Recommended properties if supported by the part schema: Part Type = Connector, Connector Type = Header, Connector Gender = Male, Connector Pitch = 7.50 mm, Connector Positions = 2, Connector Rows = 1, Mount = Through Hole, Orientation = Right Angle, Operating Temperature = -40 to +105 °C.
Flagged mismatches and uncertainties
  1. Product-page scrape conflict: one scrape of the product page returned Mini-Fit BMI, 10 circuits, 4.20 mm pitch, vertical. This conflicts with the official 46007 series-chart entry for 460071102 and appears to be stale/misparsed page data. The 46007 Sabre 2-circuit right-angle interpretation matches the MPN and project description.
  2. Missing pin descriptions: terminal-level pin descriptions are not set.
  3. Full footprint dimension verification incomplete: the drawing URL is official, but PDF extraction failed, so pad coordinate-by-coordinate validation remains manual.
  4. Datasheet URL was added as a project-level Datasheet URL property; the property editor reported it as non-standard for project metadata, but it was stored successfully.

    Reviewed part metadata

    Datasheet / official source

    Key specs from official Molex series-chart data

    Cross-check results

    Schematic symbol

    Footprint

    Part properties

    Flagged mismatches and uncertainties

Documents

    Part Review: Molex 460071102

Assets

460071102

460071102

460071102 460071102_0_0 Symbol.svgDefault
kicad_mod

460071102

MOLEX_460071102.kicad_modFootprint
step

460071102

460071102.STEP3D Model
0460071102-thumb.png

0460071102-thumb.png

0460071102-thumbThumbnail

0460071102

0460071102 thumbnail
2 Position Header, Male Blades Connector Solder 0.295" (7.50mm) Through Hole, Right Angle 46007-1102
0460071102 is a 2-position right-angle PCB header from the Molex Sabre power connector family, designed for high-current wire-to-board power applications. It features a 7.50 mm pitch, through-hole mounting, and a shrouded housing for secure mating and enhanced safety. The connector is commonly used in power supplies, industrial equipment, appliances, and other systems requiring reliable high-power connections. It is glow-wire capable and complies with UL1977 finger-proof access requirements.
Key Features 2-circuit male header from the Molex Sabre series 7.50 mm pitch power connector Right-angle through-hole PCB mounting Shrouded and polarized design for secure mating Locking ramp retention feature Tin-plated brass contacts Nylon housing with UL94V-0 flammability rating Glow-wire capable for appliance applications Operating temperature range: -40°C to +105°C Supports wire-to-board power connections Complies with UL1977 finger-proof safety requirements
#CommonPartsLibrary #Connector #Molex #SabreConnector #PowerConnector #WireToBoard #PCBHeader #RightAngleConnector #ThroughHole #IndustrialElectronics #PowerDistribution #HighCurrentConnector

Properties

460071102

Molex

Connector

molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/460/46007/460071103_sd.pdf

J

parametric-v1

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls