Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Design a blinking LED circuit

Design a WiFi water flow meter

Help me brainstorm ideas

Design a block diagram

Find parts in the library

Read a datasheet

Simulate a circuit

New Subsystem Wizard

I need to create a project that charges the battery of a bicycle of 24V and 7.5A...

adithyaps

@copilot I need to create a project that charges the battery of a bicycle of 24V and 7.5Ah from solar panels of 50Wp and 20v maximum voltage. But with the help of supercapacitors. First the supercapacitors has to be charged and then it has to charge the battery when there is high intensity of sunlight. and directly the battery when there is moderate intensity. what components are required to achieve this. I need to know the circuit diagram. Solar Panel Specifications: Maximum Power: 50 Wp Maximum power voltage: 20V Maximum power current: 2.5A Short circuit current:2.6 A Open circuit Voltage: 23.5 V Maximum system Voltage: 600 V. we are connecting two solar panels in parallel. We have planned to use 9 supercapacitor cells in series of rating 500F and 3V. First tell what are all the components required to achieve this? specify the components that are required that is the specific models of each component and what are the ratings of each component for example the voltage and current ratings.

copilot

For a project that involves charging a 24V, 7.5Ah battery from 50Wp, 20V maximum voltage solar panels, using supercapacitors for energy storage during high sunlight intensity, and charging the battery directly under moderate sunlight, there are several components and design considerations to take into account. This system requires a thoughtful design to ensure efficiency and safety in charging the battery, especially considering the dynamic nature of solar energy and the specific requirements of supercapacitors and battery charging.

Core Components

Solar Panels: As you've mentioned, you're using two solar panels with the following specifications:
- Maximum Power: 50Wp each
- Maximum Power Voltage: 20V
- Maximum Power Current: 2.5A
- Connecting the solar panels in parallel will theoretically double the current output to 5A while maintaining the same voltage.
Supercapacitors: You plan to use 9 supercapacitor cells connected in series.
- Individual rating: 500F, 3V
- Series configuration: Results in a total voltage of 27V (3V * 9) and a capacitance value reduced due to series connection. The total capacitance can be calculated using the formula $C_{total} = \frac{C}{n}$ where (C) is the capacitance of one supercapacitor and (n) is the number of supercapacitors in series. Therefore, $C_{total} = \frac{500F}{9} ≈ 55.56F$ .
Charge Controller with MPPT (Maximum Power Point Tracking): This is crucial for optimizing the power drawn from the solar panels.
- Specification: Must support input from the solar panels and provide proper charging profiles for both the supercapacitors and the battery.
- Recommendation: A charge controller that can handle at least 20V and 5A from the solar panels is required. Additionally, it should feature MPPT for efficiency and programmable outputs for supercapacitor and battery charging.
DC-DC Converters:
- Buck-Boost Converter for charging the supercapacitors: Since your supercapacitors are in series for a total of 27V and the solar panel outputs 20V, you'll need a buck-boost converter to step up the voltage when charging the supercapacitors. Ensure that it can handle the input from the solar panels and the required charging voltage for the supercapacitors.
- Buck Converter for charging the battery: To ensure that the 24V battery is charged correctly from the higher voltage of the supercapacitors, a buck converter is required.
Diodes: These will be used for directional control of current, preventing backflow into the solar panels and between the supercapacitors and the battery.
Voltage and Current Sensing Circuits: For monitoring the charge states of both the supercapacitors and the battery. These circuits will provide feedback to the control system to switch between charging modes.
Control System: A microcontroller or dedicated control IC that can monitor solar intensity via voltage and current sensing circuits and manage the charging of supercapacitors or the direct charging of the battery based on predefined conditions.

Ratings & Models (Estimations and Assumptions)

Buck-Boost Converter: Considering your use case, look for a model that can support inputs up to 25V and provide adjustable output up to 30V with a minimum current capacity of 5A. A specific model would depend on the availability from suppliers but consider devices similar to the LM25116 or any suitable integrated buck-boost controller capable of handling the specifications.
Buck Converter for Battery Charging: Needs to support up to 30V input (due to supercapacitors) and output 24V with current up to 5A. A model such as the LM2596 could be appropriate, given its wide input range and adjustable output voltage.
Control System (Microcontroller): A model like the Arduino Due or STM32F4 series could be suitable, given their Analog-to-Digital Converter (ADC) capabilities and processing power for real-time adjustments and monitoring.

Additional Components

Fuses and Protection Circuits: Essential for safeguarding against over-current scenarios.
Heat Sinks: For the DC-DC converters, given the power levels involved.
Power Resistors: For initial charging circuit calibration and safety tests.

Note

This setup requires careful planning and simulation before actual implementation. Given the complexity, especially with handling high-capacity supercapacitors and solar power, safety measures must be a priority, considering voltage and current levels in various charging stages. Further, component specifications, particularly for the converters and control electronics, need precise selection based on the final design criteria and simulations.

adithyaps

@copilot I need to create a project that charges the battery of a bicycle of 24V and 7.5Ah from solar panels of 50Wp and 20v maximum voltage. But with the help of supercapacitors. First the supercapacitors has to be charged and then it has to charge the battery when there is high intensity of sunlight. and directly the battery when there is moderate intensity. what components are required to achieve this. I need to know the circuit diagram. Solar Panel Specifications: Maximum Power: 50 Wp Maximum power voltage: 20V Maximum power current: 2.5A Short circuit current:2.6 A Open circuit Voltage: 23.5 V Maximum system Voltage: 600 V. we are connecting two solar panels in parallel. We have planned to use 10 supercapacitor cells in series of rating 500F AND 2.7V. First tell what are all the components required to achieve this?

copilot

To achieve your stated goal, you'll need a variety of components to manage the energy flow efficiently from solar panels to supercapacitors and then to the bicycle battery under different sunlight conditions. Given the specifications provided for the solar panels, supercapacitors, and the battery, let's outline the components and a high-level approach.

Components Required:

Solar Panels: Two 50Wp, 20V solar panels, to be connected in parallel. This configuration doubles the current output while maintaining the same voltage, effectively giving you 100Wp at 20V with a maximum current of 5A.
Supercapacitors: Ten 500F, 2.7V supercapacitor cells, to be connected in series. This will give you a supercapacitor bank with a total capacity of 50F at 27V, which suits the charging voltage margins for your 24V battery.
Charge Controller: A solar charge controller optimized for supercapacitor charging. This controller should support variable charging rates and be capable of handling the energy flow from the solar panels to the supercapacitors and the bicycle battery, regulating the process based on the intensity of sunlight.
DC-DC Converters:
- Buck-Boost Converter for Supercapacitors: To manage the charging of the supercapacitors from the solar panels, accommodating the variance in voltage levels.
- Step-down (Buck) Converter for Battery Charging: To safely step down the voltage from the supercapacitor bank or solar panels directly to the appropriate charging voltage for the 24V battery.
Switching Circuitry: For controlling whether the charge flows from the solar panels to the battery directly or first to the supercapacitors, based on the intensity of sunlight. This can be managed by smart relays or MOSFETs governed by a microcontroller or a dedicated control unit.
Protection Circuitry:
- Overcharge and Deep Discharge Protection for Supercapacitors: To prevent damage to the supercapacitors.
- Battery Management System (BMS): For the lithium battery to ensure safe charging, discharging, and overall battery health.
Sensors: Light intensity sensor to measure the sunlight intensity, which will decide the charging path—either direct to battery or via supercapacitors.
Microcontroller Unit (MCU): To read sensor inputs and control the switching circuitry based on programmed logic for sunlight intensity, ensuring the optimal charging path is selected.

High-Level Circuit Approach:

Connect the Solar Panels in Parallel: Connect panel 1 (+) to panel 2 (+), and panel 1 (-) to panel 2 (-), ensuring a cumulative output of 100Wp at 20V maximum voltage.
Charge Controller and DC-DC Converters:
- The charge controller receives input from the solar panels.
- Based on the light intensity, control the charge flow: direct to battery via a step-down converter or to supercapacitors via a buck-boost converter.
Supercapacitor Charging Path:
- A buck-boost converter steps voltage up or down as needed to charge the supercapacitors.
- Once the supercapacitors are charged, a step-down converter regulates the voltage to charge the battery.
Direct Battery Charging Path:
- In moderate light conditions, the charge controller directs the voltage through a step-down converter to charge the battery directly.
Protection and Control:
- Integrate protection circuitry for both the supercapacitors and battery.
- The microcontroller controls the switching based on the intensity of sunlight, deciding the charging route.

This setup enables the flexible use of energy harvested from the solar panels, optimizing charging for varying sunlight conditions. Remember, simulation and testing in your specific application are crucial to fine-tune these components for efficiency and safety.

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.9k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M

Project Name

Frightened Pink Dejarik

Description

Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

adithyaps / Frightened Pink Dejarik

Schematic

Introducing AI Placement!