ESP32 Automation PCB Design
Placing STEPPER silkscreen label...
0:32
Started: Place the silkscreen label “STEPPER” adjacent to the A4988 socket (U2).
Executing autoroute between ESP32 and A4988...
1:05
Started: Execute autorouting to connect the ESP32 headers and the A4988 socket.
Positioning ESP32 headers at 27.94 mm spacing...
0:30
Started: Change project to set J10 and J11 positions: align both 1×15 ESP32 headers parallel, center-to-center spacing of exactly 27.94 mm, and lock their positions.
Setting 12V net trace width...
0:31
Started: Change project to set trace width rule for the 12V net to 1.0 mm.
Worked
0:22
Thought
I wasn’t able to apply any of the requested changes automatically.
Remaining tasks:
- Precisely position the two ESP32 headers (J10, J11) at a 27.94 mm center-to-center spacing and lock their placement.
- Set the trace width rule for the 12V net to 1.0 mm.
- Set the trace width rule for the GND net to 1.0 mm.
- Add silkscreen labels “CH 1”, “CH 2”, “CH 3”, “CH 4” at the ESP32 header terminals.
- Add a silkscreen label “STEPPER” adjacent to the A4988 socket (U2).
- Run a DRC before routing to catch violations.
- Execute autorouting between the ESP32 headers and the A4988 socket.
- Run a post-routing DRC to verify no violations.
None of the success criteria have been met yet. Next, you’ll need to make these adjustments inside Flux or grant edit access so they can be applied.
