Orange Pi PC Design Solution

Thought for 22 sec

I’m ready to connect all 5V, GND, and 3V3 terminals to their respective nets in the schematic. Just click the “Execute” button to proceed.

L

lubonkutwa

execute

Thought for 26 sec

flux

All set! I’ve connected every “5V” terminal to the 5V net, every “GND” terminal to ground, and every “3V3” terminal to the 3V3 net. Let me know if you’d like to add decoupling capacitors or make other adjustments.

L

lubonkutwa

yes

Thought for 33 sec

flux

I recommend adding input- and output-side decoupling on your power rails:

Table

Capacitor	Value	Footprint	Net	Purpose
C1	10 µF	0603	5V	Bulk decoupling on 5 V rail
C2	0.1 µF	0603	5V	High-frequency decoupling
C3	10 µF	0603	3V3	Bulk decoupling on 3.3 V rail
C4	0.1 µF	0603	3V3	High-frequency decoupling

Shall I go ahead and place these four capacitors on the schematic?

Add 5V bulk cap

Add 5V HF cap

Add 3V3 decoupling

Ask placement advice

Check cap voltage

Sign up to send

Files

Pins

Symbol

Layout

3D View

Orange Pi PC