Nim Game Hardware Design
Thought for 1 min 6 sec
This is the most relevant entry I found related to the topic:
“Managing Project Access
For Individual Projects
To manage access to an individual project:
- Click the share button in the toolbar
- Configure anonymous access (public/private)
- Add specific users and assign permission levels
- Review current access in the sharing panel
Learn more about sharing”
Thought for 52 sec
Goal: create the Nim schematic on your NUCLEO-G031K8 with 12 LEDs (GPIO sink at 3.3 V) and 6 switches to GND (internal pull-ups).
Plan:
- Add 12 LEDs + 12 series resistors, and 6 momentary switches.
- Wire: LED anodes to 3V3; LED cathodes via resistors to D2–D13. Switches from A0–A5 to GND_1/GND_2.
- Label by row/color; add notes for sink-drive and using internal pull-ups.
- Run ERC and tidy designators.
Please click Start on the plan bar to execute. If Start is still disabled, confirm the project is editable (not read-only) and that you’re in the editor for this project, not a published part preview.
Pick LED current
Choose resistor footprint
Select pushbutton part
Clarify pin mapping
Flux schematic labeling help
