ATTiny85 Power Consumption Inquiry
what is power consuption for attiny85.
Thought for 19 sec
The ATTiny85’s supply current varies widely depending on VCC, clock speed and operating mode (active, idle, power-down). What conditions would you like? For example:
- Active mode at 5 V, 1 MHz
- Active mode at 5 V, 8 MHz
- Idle or power-down currents
Let me know which voltage, clock frequency and mode you’re targeting, or if you’d like a summary of typical values from the datasheet.
connect gnd and aref
Thought for 4 sec
I can’t modify the project right now because there are no available ACUs for AI execution.
Nothing has been changed in this session. To connect GND and AREF manually, add a connection/net tie between the ATTiny85 GND pin and the AREF/reference node only if that matches the intended circuit; note that on many AVR designs, AREF should usually be decoupled to GND with a capacitor, not directly shorted to GND, unless the design explicitly requires it.
Add AREF capacitor
Check AREF datasheet
Run ERC check
AREF grounding guidance
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.