Bluetooth Tracker PCB Design
Thought for 35 sec
All the core components have been added to your schematic:
Table
| Function | Component & Description | Designator |
|---|---|---|
| BLE Module | Raytac MDBT42Q-P512KV2 (integrated Nordic nRF52832 SoC for BLE connectivity) | U1 |
| LiPo Battery | Lithium Polymer Battery (~100 mAh) (for power supply) | BAT1 |
| Battery Protection IC | Seiko S-8261 Series (protects against overcharge, overdischarge, and other battery faults) | U2 |
| Wireless Charger IC | Texas Instruments BQ51050BRHLR (manages Qi wireless charging operation) | U3 |
| Inductive Charging Coil | Inductive Charging Coil (approximately 20 mm, from brands like TDK or Würth) | L1 |
| Audio Alert (Buzzer) | Piezoelectric Buzzer Disc (Murata, ~12 mm diameter, for audible alerts) | B1 |
| LED Indicator | SMD LED (from Cree/Osram; for visual pairing/low battery indication) | LED1 |
| LED Current-Limit Resistor | 470Ω Resistor (to control current for the LED indicator) | R1 |
| Decoupling Capacitor | Murata GRM 0.1µF Capacitor (for power decoupling near the BLE module and ICs) | C1 |
| RF Matching Inductor | Murata LQM Inductor (for optimizing antenna performance and signal conditioning) | L2 |
Would you like to proceed with wiring the connections between these components next?
Connect power and ground
Begin schematic wiring
Wire essential nets
