Addressable LED Panel Recommendations
Worked for 7 mins 34 sec
Done — added 60 Top-copper stubs, one from each LED’s VDD pad:
- Length: 1.0 mm
- Direction: right (+X)
- Width: 0.5 mm
- Net: 5V
All component positions and existing routing were preserved.
Thought for 12 sec
I’ll add a 5V through-via at the open end of each of the 60 VDD stubs, preserving the existing placement and traces.
Worked for 3 mins 1 sec
Added 60 through-vias, one at every LED VDD stub endpoint.
- Net: 5V
- Via pad: 0.6 mm
- Drill: 0.3 mm
- Layers: Top ↔ Bottom
- All 60 stubs terminate correctly
Open items:
- 6 copper-overlap errors exist near some new vias.
- The unfinished board has 141 total airwires, including separate 5V islands.
Next priority is resolving the six via overlaps before routing the remaining 5V distribution.
Worked for 16 sec
Project description updated with the panel dimensions, 60× SK6812 RGBW array, LM61460-Q1 power stage, 12–24 V input, 5 V/6 A output, and dual SMD connectors.
Fix via overlap errors
Run design review
Route LED power
Compact the schematic
