I’m dealing with a blank image likely due to a filter. I should edit it, but I think I'll need to mutate component properties with the correct designator, especially if it targets duplicates with a suffix. I need to ensure I have all 61 entries accounted for. Also, I’m considering whether to adjust the property configuration for Terminal Order — that might help clarify things as I work with these entries.

I need to create a map based on the coordinates. I'm parsing the coordinates from the component list, particularly the "position y" values. It seems that a larger y value might actually indicate a lower position on the screen? From the screenshot, the GPIO order is top-to-bottom, so I have the y positions for GPIO pins ranging from GPIO0 at -84 to GPIO10 at -828, with QSPI at y456. I need to confirm if increasing y means moving downward on the screen.

I'm examining a mental image that has a section labeled POWER and GPIOs. It seems like GPIO0 is at the top with a y-value around -84, while GPIO14 is lower at -600. I think the QSPI pins have a y-value of 456, indicating they should be above the other GPIO. There could be an inconsistency because the image might be rotated. I need to check the current rendering based on the screenshot provided by the user.

I’m looking at the screenshot and thinking that the terminal order property should be independent for each terminal to align with the sequence shown. On the left, I see POWER at the top with pins like IOVDD pin 1, DVDD pin 6, IOVDD pin 11, and possibly GND pin 61. On the right, there might be IOVDD pin 20, DVDD pin 23, IOVDD pin 30, IOVDD pin 38, DVDD pin 39, and IOVDD pin 45.

I’m thinking about how the Terminal Order controls could affect the row arrangement based on pin numbers. It's probably best to set the Terminal Order equal to the current Symbol Pin Position's ordering to keep everything structured. I need to determine the sort direction, and if we go with an auto-layout grouped by section, maybe it'll be ascending from top to bottom. I'll use the existing y values to map accordingly, but it's tricky to figure out which direction to go.

I’m considering whether the project name component includes pin symbol positions around a rectangular package. The screenshot seems to show a large symbol with a pattern that might correspond to the physical pin order. At the top-left, there appear to be power pins like IOVDD. The GPIO section lists positions sorted by y, but it doesn’t seem to follow a strict pattern with the pin numbers. It seems I need to clarify whether y is increasing or decreasing when viewed from the top.

I need to understand all the Pin Orientations, as some could be derived from flipX. It’s strange that some existing Pin Orientations for the left are labeled as "Right." I wasn't asked about this, but maybe I should consider setting the "Terminal Order" to match the sort index from the existing visual section in the screenshot rather than using the Pin Number. I think I should group them by section, starting with POWER at the top. But what about the left side?