Copying and Modifying Objects

aetrius

aetrius

on pin_4 it needs 5v power in, does our setup have an output for us here for this from our power
8 days

flux

0:18

Clarifying project specifics.

No - this current setup does not appear to have any power-generation or power-output circuitry.
You’re in a part project for a simple 1x10 pin header, so Pin_4 is just a terminal on the connector, not a regulated 5 V source. The project description identifies it as a through-hole straight pin header, not a power module or regulator .
So if Pin_4 “needs 5 V power in,” that means:
  • Pin_4 should be labeled or typed as a Power In pin, not an output
  • the actual 5 V source has to come from elsewhere in the larger system
  • this part by itself does not provide that 5 V rail
The pin-sync guidance also distinguishes Power In pins like VIN/VCC from Power Out pins like VOUT .
If you want, I can help you:
  • decide whether Pin_4 should be renamed to 5V or VIN_5V
  • define its pin type as Power In
  • create an editable clone of this part so you can make that change yourself
Check Pin_4 source
Review 5V rail
Find missing 5V
Check power issues
8 days
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    Conn_01x10

    Conn_01x10

    defaultDefault
    PinHeader_1x10_P2.54mm_Vertical image.png

    PinHeader_1x10_P2.54mm_Vertical image.png

    PinHeader_1x10_P2.54mm_Vertical imageThumbnail
    step

    PinHeader_1x10_P2.54mm_Vertical.step

    3D3D Model
    kicad_mod

    PinHeader_1x10_P2.54mm_Vertical-Footprint-S.kicad_mod

    Footprint-S

    Pin Header 01x10 2.54mm Vertical

    Pin Header 01x10 2.54mm Vertical thumbnail
    Through Hole straight pin header, 01x10, 2.54mm pitch, single row #pinheader #tht #SimplifiedFootprint

    Properties

    Connector

    J

    Pricing & Availability

    Distributor

    Qty 1

    Controls