4-Cell Li-Ion Charger Circuit
0:41
Thinking deeply about your request.
Providing a high-level execution plan.
Your goal is a 4-cell Li-ion 1 A charger circuit based on the current charger project.
- I’ve prepared the plan to build it around U.
- It covers charger setup, required passives, connectors, protection placeholders, and project metadata.
- Click Start on the plan bar to begin execution.
If you want, send the remaining charge parameters and I can revise the plan before you start.
Plan
Goal
- Design a 4-cell Li-ion charger circuit using the existing BQ25672RQMR project as a foundation. The charger will be powered by a single 19 V DC input and will manage a 4S battery pack (14.4 V nominal, 16.8 V maximum), delivering a 1 A charge current. The circuit will operate with a 750 kHz switching frequency and will omit a ship FET.
-
Project Update and Requirements Documentation
- Update the project description to include the 4S Li-ion charger requirements.
- Document the battery pack parameters (14.4 V nominal, 16.8 V maximum) and the 19 V DC input requirement.
- Record design goals: 1 A pack charge current and 750 kHz switching.
-
Review Existing Project Scaffold
- Examine the current schematic for the BQ25672RQMR and identify available pins and nets.
- Determine adjustments to incorporate the charger circuitry within the current design framework.
-
Charger Schematic Development
- Develop the input power stage to adapt the 19 V DC source for the charging circuit.
- Incorporate the charger power stage using the BQ25672RQMR, ensuring compatibility with 4S Li-ion charging.
- Place and configure necessary supporting components (inductors, capacitors, resistors) for regulation at 750 kHz.
- Ensure the design supports a 1 A charge current and excludes the ship FET feature.
-
Schematic Connectivity and Integration
- Establish connections between the input power stage, charger controller, and battery terminals.
- Update net connections to ensure proper signal path and power management for 4S configuration.
- Verify that all new design elements integrate cleanly with the existing project structure.
-
**Validation and Documentation
- Review the schematic for completeness and correct electrical connections.
- Update project properties and documentation reflecting the revised design intent and parameters.
- The updated schematic meets 4-cell (4S) Li-ion charging requirements with 14.4 V nominal and 16.8 V maximum conditions.
- The input 19 V DC is correctly handled by the charger power stage.
- All components support the target 1 A charge current and are tuned for 750 kHz switching frequency.
- The design successfully integrates into the existing BQ25672RQMR project without the ship FET component.
- Project documentation is updated to reflect the new design parameters and schematic changes.
40 days
single Input is 19V DC, battery is 4S Li-ion 14.4V nominal, 16.8V max, and 1A is pack charge current. switching frequency is 750khz, no shipfet needed
40 days
1:05
Thinking deeply about your request.
Drafting an execution plan.
Creating an execution plan.
Drafting project context.
Working on your request.
Analyzing the schematic.
Reviewing the bill of materials.
Creating execution plan.
Working on your request.
Crafting a concise plan.
Your goal is a 4-cell Li-ion charger in this U project with 19 V input, 16.8 V max charge voltage, 1 A charge current, 750 kHz switching, and no ship FET.
- The plan is now updated and ready to execute.
- It will document the requirements, build the charger schematic, connect the power/battery paths, and validate completeness.
Click Start on the plan bar to begin.
Plan
Goal
- Design a 4-cell Li-ion charger circuit using the existing BQ25672RQMR project as a foundation. The charger will be powered by a single 19 V DC input and will manage a 4S battery pack (14.4 V nominal, 16.8 V maximum), delivering a 1 A charge current. The circuit will operate with a 750 kHz switching frequency and will omit a ship FET.
-
Project Update and Requirements Documentation
- Update the project description to include the 4S Li-ion charger requirements.
- Document the battery pack parameters (14.4 V nominal, 16.8 V maximum) and the 19 V DC input requirement.
- Record design goals: 1 A pack charge current and 750 kHz switching.
-
Review Existing Project Scaffold
- Examine the current schematic for the BQ25672RQMR and identify available pins and nets.
- Determine adjustments to incorporate the charger circuitry within the current design framework.
-
Charger Schematic Development
- Develop the input power stage to adapt the 19 V DC source for the charging circuit.
- Incorporate the charger power stage using the BQ25672RQMR, ensuring compatibility with 4S Li-ion charging.
- Place and configure necessary supporting components (inductors, capacitors, resistors) for regulation at 750 kHz.
- Ensure the design supports a 1 A charge current and excludes the ship FET feature.
-
Schematic Connectivity and Integration
- Establish connections between the input power stage, charger controller, and battery terminals.
- Update net connections to ensure proper signal path and power management for 4S configuration.
- Verify that all new design elements integrate cleanly with the existing project structure.
-
**Validation and Documentation
- Review the schematic for completeness and correct electrical connections.
- Update project properties and documentation reflecting the revised design intent and parameters.
- The updated schematic meets 4-cell (4S) Li-ion charging requirements with 14.4 V nominal and 16.8 V maximum conditions.
- The input 19 V DC is correctly handled by the charger power stage.
- All components support the target 1 A charge current and are tuned for 750 kHz switching frequency.
- The design successfully integrates into the existing BQ25672RQMR project without the ship FET component.
- Project documentation is updated to reflect the new design parameters and schematic changes.
Add battery connector
Review BQ25672 limits
Check input protection
Run review next
40 days
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.