MKR WiFi 1010 and AS7341 Schematic Design

diegoemorales

diegoemorales

I want to create a schematic with an Mkr 1010 wifi that includes an as7341

flux

I’ll create a schematic that uses an Arduino MKR WiFi 1010 and an AS7341 over I2C, with power, decoupling, and pull-ups, then label nets and run ERC.
Planned steps:
  1. Add Arduino MKR WiFi 1010 header/symbol exposing 3V3, 5V, VIN, GND, SDA, SCL, and a free GPIO for INT.
  2. Add AS7341 and required passives: 100nF Capacitor at VDD and nearby 1uF Capacitor.
  3. I2C: connect SDA↔SDA, SCL↔SCL; add two 4.7k Resistor pull-ups to 3V3 (default) with total bus capacitance ≤ 400 pF.
  4. Power and signals: VDD→3V3, GND→GND, INT→free MKR GPIO; label nets (SDA, SCL, 3V3, GND, INT).
  5. Run ERC to verify decoupling and pull-ups; confirm footprints and note any optical keep-out for the sensor.
Click Start on the plan to proceed, or tell me any preferences (pull-up value, INT pin choice, or 3.3 V vs other I/O voltage) and I’ll adjust before we run it.
Pick I2C pin and pullups
Add parts from library
Confirm decoupling choices
Choose INT GPIO
Check level shifting need
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    kicad_mod

    MODULE_ARDUINO_MKR_ZERO-Footprint-S.kicad_mod

    Footprint-SFootprint
    ARDUINO_MKR-Symbol.svg

    ARDUINO_MKR-Symbol.svg

    ARDUINO_MKR-SymbolDefault
    ARDUINO_MKR_ZERO

    ARDUINO_MKR_ZERO

    default

    ARDUINO-MKR-Template

    ARDUINO-MKR-Template thumbnail
    MODULE_ARDUINO_MKR_ZERO Manufacturer Recommendations N/A Arduino N/A

    Properties

    Template

    true

    Pricing & Availability

    Distributor

    Qty 1

    Controls