DS18B20U+ Routing Guidance
Thought for 31 sec
La entrada más relevante que encontré en la documentación dice:
“Step 1: Adding DXF/SVG Files as Assets
To add an external file as an asset:Open the "Files" tab on the top center of the app.
On the right drawer, scroll down until you find the assets panel. Click on the cog-like icon to manage your assets.
Then click on "Add item" and select the file from your local drive.Step 2: Link the Asset to the Target ElementOnce you've added the SVG or DXF file to the asset list, then link the asset to the target element.To link an asset to an element:Select the element you want to make into a custom shapeSilkscreen: Object type -> Silk LineLocate the "Layout rules" drop-down menu on the right-side panel
Find the "Object-specific rules" submenu
Click on "Add"
Find and add the "Asset" rule
Inside the "Asset" text box, select the SVG/DXF file added in the previous step from the list”
Add a Silkscreen Image object to the Top Overlay layer. Center it at the top of the circular board, above the 'VASLOTH' text. Set its size to 10mm x 10mm. If the asset is missing, create a placeholder so I can manually upload the SVG file in the inspector.
Thought for 34 sec
I verified the SVG asset is already in the project as Logo-Vasloth-Vectorizado.svg, so no placeholder asset is needed. I can’t create/place a PCB Silkscreen Image object from chat with the available project-edit tools; you’ll need to add/place the image manually in Flux and select this existing SVG asset in the inspector. Asset management supports adding/managing SVG assets, but not arbitrary silkscreen image placement from chat .
Use larger placeholder
Move below text
Check overlay spacing
Move toward edge
To get started, talk to Flux or create a New Document.
