Micro Blower Circuit Analysis
Thought for 23 sec
Below is the summary of the applied net wiring updates:
Table
| Net Name | Connections Summary |
|---|---|
| VCC | - [V1] positive terminal connected to U2's VCC pin- [C4] connected between VCC and GND for decoupling |
| GND | - [V1] negative terminal, U2 ground, [C4], [C5], and [C6] connected to [Ground]- Common emitter reference for Q1 via [R8] (if used) |
| REF | - Resistor divider using [R3] from VCC to “REF” and [R4] from “REF” to GND- “REF” is connected to the non-inverting input of U2 |
| OSC_OUT | - U2 output labeled as “OSC_OUT”- [C5] connected between OSC_OUT and GND for filtering- [R5] connects OSC_OUT to Q1 bases |
| OUT1/OUT2 | - Collector of Q1/A connected to “OUT1” (with optional [R6] series)- Collector of Q1/B connected to “OUT2” (if applicable) |
| Additional | - [R7] may be used for extra biasing at U2’s input- [R9] serves as a jumper to tie nodes as needed |
These updates clearly define the power, ground, and signal connections. The net wiring changes have now been applied to the schematic.
Add MCU and decoupling
Check for floating nets
Integrate power supply section
Next step: Add components
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.