Bluetooth BLE y Classic Comunicación

flux

Aquí te propongo la siguiente sugerencia para actualizar el esquema, conectando un LED al GPIO2 del ESP32-WROOM-32 mediante un resistor de 220Ω:
Cambios en el esquema:
  • Agregar componentes:
    1. Un LED genérico asignado como LED1.
    2. Un resistor de 220Ω asignado como R1.
      • Referencia: R1
  • Realizar conexiones:
    1. Conectar el pin IO2 (GPIO2) de ESP32-WROOM-32 (U1, pin 24) a la terminal anodo de LED1.
    2. Conectar la terminal catodo de LED1 a un extremo de R1.
    3. Conectar el otro extremo de R1 al componente Ground.
Utiliza el botón "Apply changes" para agregar estos componentes y conexiones al esquema.
tka24

tka24

Apply the changes: connect GPIO2 from the ESP32 to an LED followed by a 220Ω resistor to ground. Make sure to add LED1 and R1 from the parts library.

flux

Below is a summary of the schematic changes to be made:
  • Components to add:
    1. LED1: A generic LED.
    2. R1: A 220Ω resistor.
  • Wiring:
    1. Connect GPIO2 of ESP32-WROOM-32 to the anode of LED1.
    2. Connect the cathode of LED1 to one end of R1.
    3. Connect the other end of R1 to Ground.
You can use the "Apply changes" button to update your schematic with these connections.
Wire GPIO2 to LED+R
Connect GPIO2 via LED to ground
Add LED and resistor from library
Schematic update for LED indicator
Implement LED indicator circuit
C1
Capacitance
0.1uF
U1

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    Sick Amethyst X-Wing

    Sick Amethyst X-Wing thumbnail
    Welcome to your new project. Imagine what you can build here.

    Properties

    Properties describe core aspects of the project.

    Pricing & Availability

    Distributor

    Qty 1

    Controls