4U MPCP Board Design Plan
Updated passive component properties
0:31
Started: Update passive component properties to ensure correct voltage and power ratings based on review results.
Updated active component properties
0:35
Started: Update active component properties to ensure adequate voltage and current headroom based on review results.
Changed PCB layout to 4U size
0:32
Started: 6.1. Change PCB layout size to 482 mm × 177 mm (4U form factor).
Added mounting-hole components at corners
0:35
Started: 6.2. Add mounting-hole components at the four board corners.
Edited stackup to Standard 12 Layer
0:40
Started: 6.3. Edit project property “Stackup” to “Standard 12 Layer”.
Updated 1 document property
0:03
Set Stackup to "Standard 12 Layer"
Edited PowerPlanes property
1:06
Started: Edit project property “PowerPlanes” to ["L2","L3"].
Updated 1 document property
0:04
Set PowerPlanes to "L2, L3"
Edited GroundFillLayers property
0:44
Started: Edit project property “GroundFillLayers” to ["L1","L4","L12"].
Updated 1 document property
0:03
Set GroundFillLayers to "L1,L4,L12"
Updated isolation keepouts specification
0:52
Started: Edit project property “Isolation Keepouts” to specify 2.5 kV clearance slots and dimensions.
Updated 5 document properties
0:05
Set Isolation Keepouts to "2.5 kV clearance; Require slot width ≥ 6.4 mm, slot length ≥ 2 mm for all isolation domains, defined in layout between isolat..."
Set Isolation Standard to "IEC 61010, IPC-2221B, 2.5 kV reinforced"
Set Isolation Slot Minimum Width to "6.4"
Set Isolation Slot Minimum Length to "2"
Set Isolation Clearance to "2.5"
Stopped due to a problem. Please try again.
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.