Vesna Clock Winding Controller Review

flux

Done.
For low-cost isolation-milled fabrication, the layout is now set to:
  • Minimum trace width: 0.25 mm
  • Minimum clearance / keep out: 0.25 mm
  • Preferred trace widths: 0.25 mm, 0.5 mm, 0.75 mm, 1.0 mm
  • Board inset margin: 0.5 mm
  • Via policy: minimized
  • Copper routing layer: single copper layer only
These are conservative CNC-friendly rules aligned with the Flux layout setup/rules workflow for board constraints and routing policy
If you want, I can next tighten this specifically for your bit and process, for example:
  • 0.30 mm / 0.30 mm for safer milling
  • 0.20 mm / 0.20 mm if your machine is dialed in
  • wider defaults for power nets only
standaoerby

standaoerby

Keep signal traces at 0.25 mm, but use wider defaults for power nets.

flux

Done.
  • Signal/default trace width: 0.25 mm
  • Minimum clearance / keep out: 0.25 mm
  • Preferred widths available for wider nets: 0.5 mm, 0.75 mm, 1.0 mm
That keeps ordinary signal routing at 0.25 mm while preserving wider defaults for power routing, which fits the CNC-friendly rule strategy described in the layout workflow guidance
If you want, I can next make the power-net intent explicit for:
  • VBAT / VBAT_SW / VMOT / GND = 1.0 mm
  • 3V3 = 0.75 mm
Set power net widths
Add current annotations
Run DRC review

Updated 1 layout rule

Set Layout's traceWidth to "0.25"

Set Layout's preferredTraceWidths to "0.25mm,0.5mm,0.75mm,1.0mm"

Set Layout's keepOut to "0.25"

Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    Assets are files uploaded to this project which can be used in various ways.

    Vesna thumbnail
    Vesna clock-winder PCB plan updated for CNC isolation milling: 80 x 60 mm board, single-sided routing preferred, vias minimized, with power trace minimums of 1.0 mm for VBAT/VBAT_SW/VMOT/GND and 0.75 mm for 3V3, and Gerber/FlatCAM-oriented fabrication notes.

    Properties

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls