Arduino Due PCB Design
Thought for 7 sec
I can’t execute design changes right now because this account has no available ACUs, so AI project-editing features are unavailable.
Current project state:
- A new empty Flux project was created: Unusual Indigo P.K.E. Meter
- No schematic components, nets, PCB layout, or documentation have been added yet.
- You uploaded a reference image for an Arduino Due motor/control expansion board with:
- Arduino Due main controller
- 12 motor control channels
- 54 digital outputs
- 12 analog outputs
- 24 V input with 5 V buck converter
- I2C/SPI headers and terminal blocks
- Approx. 250 mm × 180 mm PCB concept
What remains to be done once ACUs are available:
- Define the exact requirements: motor current, output voltage/current, analog output type, connector style, and whether this should be an Arduino Due shield or a carrier board.
- Create the schematic with power input, buck regulator, Arduino Due headers/module, motor drivers, digital output terminals, analog output DACs, and protection.
- Verify the schematic with ERC/design review.
- Create PCB outline, place components, route traces, then run DRC.
- Add bring-up notes and manufacturing outputs if needed.
Define requirements
Save concept note
List components
Estimate power needs
Shield or carrier
No schematic yet
Talk to Flux to get started.
