Crystals
RK809-5
QFN-68-EP(7x7) Power Management - Specialized RoHS The RK809-5 is a highly integrated Power Management Integrated Circuit (PMIC) from Rockchip designed for multi-core processor systems and embedded applications. It provides a complete power management solution by integrating multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, battery fuel gauging, RTC functionality, and audio codec capabilities into a single device. The RK809-5 is commonly used alongside Rockchip SoCs in single-board computers, tablets, AIoT devices, and industrial embedded systems. Key Features Five high-efficiency synchronous buck converters with fast transient response. Nine low-dropout (LDO) voltage regulators for powering sensitive analog and digital circuits. Integrated battery fuel gauge for battery capacity monitoring. Configurable power-up and power-down sequencing (OTP programmable). Dynamic Voltage Scaling (DVS/DVFS) support via I²C interface. Integrated Real-Time Clock (RTC) with 32.768 kHz crystal oscillator support. Two integrated load switches for peripheral power control. Over-current, over-voltage, and thermal protection features. Built-in audio CODEC with headphone driver and Class-D amplifier support. Designed to minimize external component count and simplify power system design. QFN-68-EP (7 mm × 7 mm) package. #RK8095 #RK809 #Rockchip #PMIC #PowerManagementIC #BatteryManagement #AudioCodec #RTC #DVFS #EmbeddedSystems #SingleBoardComputer #IoT #IndustrialElectronics #PowerSupplyDesign #ElectronicsEngineering
1 Use
0 Stars
PCA9450CHNY
Power Management IC for iMX8M 5V 6A 6 Buck + 5 LDO The PCA9450CHNY is a highly integrated Power Management Integrated Circuit (PMIC) from NXP Semiconductors, specifically designed to power the i.MX 8M family of application processors, particularly the i.MX 8M Plus. It integrates multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, load switching, voltage monitoring, and system control functions into a single device. The PCA9450C variant features a configurable dual-phase 6 A buck regulator for powering high-current processor cores while supporting Dynamic Voltage Scaling (DVS) for optimized power efficiency. Key Features Six high-efficiency switching regulators (Buck converters) PCA9450C variant supports a configurable 6 A dual-phase buck regulator Three 3 A buck regulators with Dynamic Voltage Scaling (DVS) Remote-sense capability on major buck outputs for IR-drop compensation Five integrated LDO regulators Supports DDR4, LPDDR4, and DDR3L memory configurations 400 mA load switch with active discharge Dual-channel logic level translator Integrated 32.768 kHz crystal oscillator driver Fast-mode Plus (Fm+) 1 MHz I²C interface Programmable power sequencing and voltage control Power ON/OFF and Standby/Run mode control inputs Protection features including UVLO, thermal shutdown, fault monitoring, and soft-start Operating temperature range: −40°C to +105°C 56-pin HVQFN package (7 mm × 7 mm, 0.4 mm pitch) Optimized for i.MX 8M Mini, Nano, and Plus processors, especially the i.MX 8M Plus for the PCA9450C variant. #CommonPartsLibrary #PCA9450CHNY #PCA9450C #NXP #PMIC #PowerManagementIC #PowerSupply #VoltageRegulator #BuckConverter #LDO #DynamicVoltageScaling #DVS #IMX8M #IMX8MPlus #EmbeddedSystems #IndustrialElectronics #PowerManagement #HVQFN56 #Semiconductor #IntegratedCircuit #IC #CommonPartsLibrary #ElectronicsDesign #HardwareDesign #PCBDesign #EmbeddedLinux #IoT #ProcessorPowerManagement #PowerSequencing #SystemPower #NXPSemiconductors
0 Uses
0 Stars
ESP32-C3-WROOM-02-N4
20.5dBm ESP32-C3 Chip 2.4GHz VFQFN-32-EP WiFi Modules ROHS RF Transceiver ICs ESP32-C3-WROOM-02-N4 BULETM-SMD_ESPRESSIF_ESP32-C3-WROOM-02-N4-4MB LCSC Part Number: C2934560 Espressif ESP32-C3-WROOM-02 wireless MCU module, based on ESP32-C3 32-bit RISC-V single-core processor up to 160MHz, supports 2.4GHz Wi-Fi 802.11b/g/n and Bluetooth LE 5.0 with Bluetooth mesh, 4MB or 8MB SPI flash options, 384KB ROM, 400KB SRAM and 8KB RTC SRAM, up to 15 GPIOs, SPI, UART, I2C, I2S, LED PWM, USB Serial/JTAG, ADC, timers and watchdogs, integrated 40MHz crystal oscillator, 3.0V to 3.6V supply voltage, on-board PCB antenna, RoHS/REACH compliant, 18.0 x 20.0 x 3.2mm module size. Search Keywords: ESP32-C3-WROOM-02, ESP32-C3-WROOM-02-N4, ESP32-C3-WROOM-02-H4, ESP32-C3-WROOM-02-N8, Espressif ESP32-C3-WROOM-02, ESP32-C3 WiFi Bluetooth module, ESP32-C3 RISC-V module, WiFi BLE 5 module, 802.11bgn module, Bluetooth mesh module, ESP32-C3 PCB antenna module, ESP32-C3 4MB flash module, ESP32-C3 8MB flash module Hashtags: #ESP32C3WROOM02 #ESP32C3WROOM02N4 #ESP32C3WROOM02H4 #ESP32C3WROOM02N8 #EspressifESP32C3 #ESP32C3 #WiFiBluetoothModule #WiFiModule #BluetoothLEModule #BLE5Module #RISCVMCU #IoTModule #PCBantenna #80211bgn
88 Uses
0 Stars
ASTX-H12-25.000MHZ-T
25 MHz TCXO HCMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead ASTX-H12 25.000 MHz Abracon ASTX-H12 HCMOS output SMD TCXO, 2.5 x 2.0 x 0.9mm package, 3.2MHz to 55MHz frequency range, standard frequencies 5MHz to 44MHz, 3.3V typical supply voltage, frequency stability up to ±2.5ppm over temperature, ±2.0ppm tolerance at 25°C, low current consumption, 15pF load, 5ns max rise/fall time, tri-state standby function, MSL-1, RoHS/RoHS II compliant, suitable for cellular phones, wireless modules, GPS, RF communication and precision clock reference applications. Search Keywords: ASTX-H12, Abracon ASTX-H12, ASTX-H12 TCXO, HCMOS TCXO, SMD TCXO 2.5x2.0mm, 3.3V TCXO, 26MHz TCXO, 40MHz TCXO, 3.2MHz to 55MHz TCXO, low power TCXO, precision clock oscillator, RF reference oscillator, GPS TCXO, wireless module TCXO, ASTX-H12 datasheet Hashtags: #ASTXH12 #AbraconASTXH12 #TCXO #HCMOSTCXO #SMDOscillator #CrystalOscillator #TemperatureCompensatedOscillator #33VTCXO #25x20mmOscillator #PrecisionClock #FrequencyReference #RFOscillator #GPSOscillator #WirelessClock
0 Uses
0 Stars
7M-27.120MEEQ-T
27.12 MHz ±10ppm Crystal 10pF 50 Ohms 4-SMD, No Lead # 7M-27.120MEEQ-T Crystal Unit Engineering Specification ## General Description The 7M-27.120MEEQ-T is a surface-mount quartz crystal resonator designed to provide a stable and accurate frequency reference for digital, wireless, communication, NFC, RFID, microcontroller, and embedded system applications. Manufactured by TXC Corporation, this crystal offers reliable frequency stability, low equivalent series resistance, and compact packaging suitable for space-constrained designs. Its surface-mount construction enables automated assembly while maintaining excellent electrical performance across a wide range of operating conditions. ## Features * Fundamental mode quartz crystal resonator * Surface-mount device package for automated PCB assembly * High frequency accuracy and stability * Low equivalent series resistance * Low power consumption * Suitable for clock generation and timing circuits * RoHS compliant construction * Reliable performance for industrial and consumer electronics applications ## Electrical Characteristics * Nominal Frequency: 27.120 MHz * Crystal Type: Fundamental Mode * Load Capacitance: 10 pF * Frequency Tolerance: ±20 ppm * Frequency Stability: ±20 ppm * Equivalent Series Resistance: 60 Ω Maximum * Drive Level: Low-power operation * Operating Temperature Range: Industrial grade * Storage Temperature Range: Extended environmental capability ## Mechanical Characteristics * Package Type: Surface-Mount Crystal * Mounting Style: SMD/SMT * Compact footprint optimized for high-density PCB layouts * Four-pad no-lead package construction ## Applications * PN532 NFC Controllers * RFID Readers and Writers * Microcontroller Clock Sources * Wireless Communication Modules * Embedded Systems * Industrial Control Electronics * Consumer Electronic Devices * IoT and Smart Device Platforms ## Compliance * RoHS Compliant * Lead-Free Construction * Suitable for Automated Assembly Processes #7M27_120MEEQT #TXC #CrystalResonator #SMDCrystal #QuartzCrystal #27_120MHz #PN532 #NFC #RFID #EmbeddedSystems #TimingReference #ElectronicsDesign
0 Uses
0 Stars
1040310811
SIM Card Connectors 1040310811 SIM-SMD_8P-1040310811 LCSC Part Number: C585350 JLCPCB Part Class: Extended Part Manufactured by MOLEX Molex 104031-0811 microSD card socket connector, push-pull type, surface mount (SMT), 8-position microSD memory card receptacle with card-detect switch, 1.42mm profile height, liquid crystal polymer (LCP) housing UL94V-0, phosphor bronze contacts with gold plating, stainless steel shell, designed for removable microSD storage applications in embedded systems, IoT devices, consumer electronics and portable equipment. Search Keywords: 104031-0811, Molex 104031-0811, Molex microSD socket, microSD card connector SMT, push pull microSD connector, microSD card receptacle, card detect microSD socket, 8 pin microSD connector, low profile microSD socket, SMT memory card connector, Molex 104031 series, microSD holder with card detect Hashtags: #1040310811 #Molex1040310811 #Molex #MicroSDSocket #MicroSDConnector #MemoryCardConnector #PushPullSocket #CardDetectSwitch #SMTConnector #EmbeddedStorage #MicroSDHolder #LCPHousing #PortableElectronics #IoTHardware #PCBConnector
32 Uses
0 Stars
5050660622
0.35 BB CONN. H=0.6 SSB6 RP REC ASSY 5050660622 is a 6-position board-to-board (mezzanine) receptacle connector from the Molex SlimStack™ Armor 505066 Series. It is designed for compact electronic devices where a very low-profile connection between two PCBs is required. The connector features a fine 0.35 mm pitch, 0.60 mm mated height, and surface-mount termination, making it suitable for smartphones, wearables, IoT devices, cameras, and other space-constrained applications. Key Features 6 circuits (contacts) for board-to-board interconnection. 0.35 mm pitch for high-density PCB designs. Ultra-low 0.60 mm mated height to minimize product thickness. 2-row connector configuration for efficient space utilization. Surface-mount (SMT) mounting for automated assembly. Armor Nail design improves solder joint strength and mechanical retention. Gold-plated contacts for reliable electrical performance and corrosion resistance. 50 V AC/DC voltage rating. Up to 0.3 A per contact current rating. Operating temperature range: -40°C to +85°C. Liquid Crystal Polymer (LCP) housing for high heat resistance during reflow soldering. 30 mating cycle durability. Typical Applications Smartphones and tablets Wearable devices Wireless modules Portable medical devices Cameras and imaging equipment Compact consumer electronics #CommonPartsLibrary #Connector
56 Uses
0 Stars
ESP32-S3-WROOM-1-N8
ESP32-S3-WROOM-1-N8 is a high-performance Wi-Fi and Bluetooth Low Energy (BLE) module from Espressif Systems. It is built around the ESP32-S3 SoC, featuring a dual-core Xtensa LX7 processor, integrated 2.4 GHz Wi-Fi and Bluetooth 5 LE connectivity, 8 MB SPI flash memory, and a PCB antenna. The module is optimized for AIoT, edge computing, human-machine interfaces, smart devices, and industrial IoT applications. Key Features Dual-core Xtensa® LX7 CPU running up to 240 MHz for high-performance embedded applications. 8 MB onboard SPI Flash (N8 variant) for firmware and data storage. 2.4 GHz Wi-Fi (802.11 b/g/n) with data rates up to 150 Mbps. Bluetooth 5 LE support including: Long Range mode 2 Mbps PHY Bluetooth Mesh Extended Advertising AI acceleration support through ESP32-S3 vector instructions for machine learning and signal-processing workloads. USB 1.1 OTG and USB Serial/JTAG integrated, simplifying debugging and USB device applications. Up to 45 GPIOs with extensive peripheral support: SPI I²C I²S UART PWM ADC Touch Sensors TWAI® (CAN-compatible) Camera Interface LCD Interface SDIO Host MCPWM Integrated 40 MHz crystal oscillator, RF matching circuitry, and PCB antenna for reduced external component count. Operating voltage range: 3.0 V to 3.6 V. Compact surface-mount module suitable for space-constrained designs. Typical Applications Smart home and home automation devices HMI displays and touchscreen products Voice recognition and audio processing Edge AI and machine learning applications Industrial IoT gateways and sensors Video streaming and camera systems USB-connected embedded devices Smart agriculture and healthcare equipment N8 specifically indicates 8 MB Flash and no PSRAM, making it a good choice for applications requiring substantial program storage but not large external RAM. #RF-transceiver #Module #ESP32
83 Uses
0 Stars
ESP32-S3-MINI-1-N8
ESP32-S3-MINI-1-N8 is a compact, low-power Wi-Fi and Bluetooth module from Espressif Systems based on the ESP32-S3 SoC. It integrates a dual-core Xtensa LX7 processor, 8 MB flash memory, crystal oscillator, RF matching circuitry, and a PCB antenna in a small SMD package, making it ideal for IoT devices, smart home products, industrial automation, HMI applications, AIoT edge devices, and USB-connected embedded systems. Key Features Dual-core 32-bit Xtensa LX7 CPU Up to 240 MHz operating frequency Includes single-precision floating-point unit (FPU) for enhanced processing performance. Integrated Memory 8 MB Quad SPI Flash (N8 variant) 512 KB SRAM 384 KB ROM 16 KB RTC SRAM. Wireless Connectivity 2.4 GHz Wi-Fi 4 (802.11 b/g/n) Data rates up to 150 Mbps Bluetooth 5 LE with Bluetooth Mesh support Simultaneous Wi-Fi and Bluetooth operation through an integrated coexistence mechanism. Rich Peripheral Set Up to 39 GPIOs USB 2.0 OTG USB Serial/JTAG SPI, I²C, I²S, UART PWM, MCPWM SDIO Host ADC Touch sensing Temperature sensor TWAI® (CAN 2.0 compatible) Timers and watchdogs. Integrated Components On-board 40 MHz crystal oscillator PCB antenna RF matching network Compact certified module design. Operating Conditions Supply voltage: 3.0 V to 3.6 V Operating temperature: −40°C to +85°C. Compliance RoHS and REACH compliant RF-certified module for simplified product development. #RF_transceiver #Module #Esp32
116 Uses
0 Stars
ESP32-C3-MINI-1-H4
ESP32-C3-MINI-1-H4 is a compact, low-power wireless module from Espressif Systems built around the ESP32-C3 SoC. It integrates a 32-bit RISC-V processor, 2.4 GHz Wi-Fi, Bluetooth 5 LE, onboard 4 MB flash memory, crystal oscillator, RF matching circuitry, and a PCB antenna in a small surface-mount package. The module is designed for IoT devices, smart home products, industrial automation, wearable electronics, and wireless sensor applications. Key Features 32-bit RISC-V single-core processor with clock speeds up to 160 MHz. 2.4 GHz Wi-Fi 4 (802.11 b/g/n) connectivity. Bluetooth 5 Low Energy (BLE 5.0) support with long-range capability. 4 MB embedded SPI flash memory (H4 variant). 384 KB ROM and 408 KB SRAM for application execution. Integrated PCB antenna for simplified RF design. USB Serial/JTAG controller for programming and debugging without an external USB-to-UART bridge. Multiple peripheral interfaces: UART SPI I²C I²S PWM GPIO ADC USB JTAG Operating voltage range: 3.0 V to 3.6 V. Supports secure boot, flash encryption, and hardware cryptographic acceleration. Compact SMD module suitable for space-constrained designs. Typical Applications Smart home and home automation devices Wireless sensors and data loggers IoT gateways and edge devices Industrial monitoring and control systems Bluetooth beacons Wearable electronics Consumer connected products H4 Variant Note: The ESP32-C3-MINI-1-H4 version includes 4 MB flash memory and supports an extended operating temperature range up to 105°C, making it suitable for more demanding industrial environments. #RF-Transceiver #ESP32 #Module
99 Uses
0 Stars
ESP32-C3-MINI-1-N4
The ESP32-C3-MINI-1-N4 is a compact, low-power wireless module from Espressif Systems built around the ESP32-C3 SoC. It integrates a 32-bit RISC-V single-core processor, 2.4 GHz Wi-Fi, Bluetooth 5 Low Energy (BLE), onboard flash memory, crystal oscillator, RF circuitry, and PCB antenna in a small surface-mount package. The module is designed for IoT devices, smart home products, industrial automation, sensor nodes, wearable devices, and other wireless embedded applications. Key Features 32-bit RISC-V Single-Core CPU Up to 160 MHz operating frequency Optimized for low-power IoT applications Integrated Memory 4 MB embedded Flash (N4 version) 400 KB SRAM 384 KB ROM 8 KB RTC SRAM Wireless Connectivity IEEE 802.11 b/g/n Wi-Fi (2.4 GHz) Data rates up to 150 Mbps Bluetooth 5 LE support Bluetooth Mesh capability Simultaneous Wi-Fi and Bluetooth operation using a shared antenna Security Features Secure Boot Flash Encryption Hardware cryptographic acceleration RSA, AES, HMAC, and Digital Signature support Rich Peripheral Set Up to 15 GPIOs UART SPI I²C I²S USB Serial/JTAG PWM TWAI (CAN 2.0 compatible) SAR ADC Timers and Watchdog timers Temperature sensor Integrated Components On-board PCB antenna 40 MHz crystal oscillator RF matching circuitry No external RF design required Power Supply Operating voltage: 3.0 V to 3.6 V Designed for low-power applications Environmental Specifications Operating temperature: −40°C to +85°C (N4 variant) RoHS and REACH compliant #module #RF-Transceiver #ESP32-C3
129 Uses
0 Stars
NRF52832-QFAA-R7
IC RF TxRx + MCU Bluetooth Bluetooth v5.3 2.4GHz 48-VFQFN Exposed Pad NRF52832-QFAA-R7 is an ultra-low-power wireless System-on-Chip (SoC) from Nordic Semiconductor, designed for Bluetooth Low Energy (BLE), ANT, NFC, and proprietary 2.4 GHz wireless applications. It integrates a high-performance ARM Cortex-M4F processor, memory, peripherals, and a 2.4 GHz radio into a single chip, making it ideal for IoT devices, wearables, wireless sensors, beacons, and smart peripherals. GHz protocols • 2.4 GHz transceiver • -96 dBm sensitivity in Bluetooth® low energy mode • Supported data rates: 1 Mbps, 2 Mbps Bluetooth® low energy mode • -20 to +4 dBm TX power, configurable in 4 dB steps • On-chip balun (single-ended RF) • 5.3 mA peak current in TX (0 dBm) • 5.4 mA peak current in RX • RSSI (1 dB resolution) • ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz • 215 EEMBC CoreMark® score running from flash memory • 58 μA/MHz running from flash memory • 51.6 μA/MHz running from RAM • Data watchpoint and trace (DWT), embedded trace macrocell (ETM), and instrumentation trace macrocell (ITM) • Serial wire debug (SWD) • Trace port • Flexible power management • 1.7 V–3.6 V supply voltage range • Fully automatic LDO and DC/DC regulator system • Fast wake-up using 64 MHz internal oscillator • 0.3 μA at 3 V in System OFF mode • 0.7 μA at 3 V in System OFF mode with full 64 kB RAM retention • 1.9 μA at 3 V in System ON mode, no RAM retention, wake on RTC • Memory • 512 kB flash/64 kB RAM • 256 kB flash/32 kB RAM • Nordic SoftDevice ready • Support for concurrent multi-protocol • Type 2 near field communication (NFC-A) tag with wakeup-on-field and touchto-pair capabilities • 12-bit, 200 ksps ADC - 8 configurable channels with programmable gain • 64 level comparator • 15 level low power comparator with wakeup from System OFF mode • Temperature sensor • 32 general purpose I/O pins • 3x 4-channel pulse width modulator (PWM) unit with EasyDMA • Digital microphone interface (PDM) • 5x 32-bit timer with counter mode • Up to 3x SPI master/slave with EasyDMA • Up to 2x I2C compatible 2-wire master/slave • I2S with EasyDMA • UART (CTS/RTS) with EasyDMA • Programmable peripheral interconnect (PPI) • Quadrature decoder (QDEC) • AES HW encryption with EasyDMA • Autonomous peripheral operation without CPU intervention using PPI and EasyDMA • 3x real-time counter (RTC) • Single crystal operation • Package variants • QFN48 package, 6 × 6 mm • WLCSP package, 3.0 × 3.2 mm #CommonPartsLibrary #IntegratedCircuit
49 Uses
0 Stars
CP2102N-A02-GQFN24
USB-to-UART Bridge CP2102N-A02-GQFN24 is a highly integrated USB-to-UART bridge controller from Silicon Labs. It provides a simple and cost-effective way to add USB connectivity to embedded systems by converting USB 2.0 Full-Speed communication into a standard UART interface. The device integrates the USB transceiver, oscillator, voltage regulator, and UART controller, minimizing external components and eliminating the need for USB firmware development. It is commonly used in microcontroller programming interfaces, industrial equipment, POS terminals, data loggers, and USB-to-serial adapters. Key Features USB 2.0 Full-Speed compliant (12 Mbps) interface. USB-to-UART bridge with data rates up to 3 Mbaud. Integrated USB transceiver; no external USB resistors required. Integrated oscillator; no external crystal required. On-chip 3.3 V voltage regulator. USB Battery Charger Detection (BC 1.2) support. Remote wakeup capability from USB suspend state. Low operating current of approximately 9.5 mA. Hardware and software flow control support. Internal configurable ROM for Vendor ID, Product ID, serial number, and USB descriptors. Royalty-free Virtual COM Port (VCP) drivers available for major operating systems. Operating temperature range: −40°C to +85°C. Compact 24-pin QFN (4 mm × 4 mm) package. Typical Applications USB-to-Serial adapters Microcontroller programming and debugging interfaces Industrial automation equipment Point-of-sale (POS) terminals Medical instruments Data acquisition and logging systems Embedded systems requiring USB connectivity #commonpartslibrary #integratedcircuit
101 Uses
0 Stars
