ESP32 Projects
ESP32-S3-WROOM-1-N16R8
Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-S3-WROOM-1-N16R8 is a high-performance Wi-Fi + Bluetooth Low Energy (BLE) module developed by Espressif Systems. It is built around the ESP32-S3 SoC, featuring a dual-core Xtensa LX7 32-bit processor running up to 240 MHz. This module integrates 16 MB Flash memory and 8 MB PSRAM, making it suitable for memory-intensive applications such as AI, image processing, and advanced IoT systems. It also includes an onboard PCB trace antenna, RF circuitry, crystal oscillator, and power management components—allowing designers to quickly integrate wireless connectivity into compact embedded designs. Key Features Processing & Memory Dual-core Xtensa LX7 CPU, up to 240 MHz 384 KB ROM, 512 KB SRAM + 16 KB RTC SRAM 16 MB Flash (Quad SPI) 8 MB PSRAM (Octal/Quad SPI) Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 (LE) + Mesh support Integrated PCB antenna Peripherals & Interfaces Up to 36 GPIOs Interfaces: UART, SPI, I2C, I2S, PWM, ADC, USB OTG Built-in USB Serial/JTAG support Supports touch sensors, timers, watchdogs, CAN (TWAI) Electrical Characteristics Supply voltage: 3.0 V – 3.6 V TX power: up to ~20.5 dBm RX sensitivity: ~-103.5 dBm Operating temp: −40 °C to +65 °C (typical) Advanced Capabilities Optimized for AI acceleration (vector instructions) Suitable for voice recognition, image processing, and edge AI Low-power modes for battery-operated devices| Typical Applications IoT devices and sensor hubs Smart home & home automation AIoT (voice/image recognition) Industrial automation & monitoring Wearables and health devices USB-connected embedded systems #Module #RF-Transceiver #ESP32-S3
1.9k Uses
5 Stars
ESP32-WROOM-32D Module
This project is a reference design for an ESP32-WROOM-32D based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU
494 Uses
5 Stars
ESP32-S3-WROOM-1-N16R8
The ESP32-S3-WROOM-1-N16R8 is a high-performance Wi-Fi and Bluetooth Low Energy (BLE) module from Espressif Systems, built around the ESP32-S3 SoC. It integrates a dual-core Xtensa® LX7 processor running at up to 240 MHz, along with 16 MB Quad SPI Flash and 8 MB Octal SPI PSRAM, making it suitable for memory-intensive embedded, IoT, AIoT, multimedia, and edge AI applications. The module includes an onboard PCB antenna, RF matching circuitry, crystal oscillator, and flash/PSRAM, simplifying hardware design and reducing development time. Key Features Dual-core Xtensa LX7 CPU operating up to 240 MHz 16 MB onboard Flash memory 8 MB onboard Octal PSRAM for large buffers, graphics, and AI workloads 2.4 GHz Wi-Fi (IEEE 802.11 b/g/n) Bluetooth 5.0 Low Energy (BLE) Built-in support for AI acceleration and vector instructions for machine learning and signal processing applications Rich peripheral set including: GPIO UART SPI I²C I²S USB 2.0 OTG PWM ADC Touch sensing SD/MMC interface CAN (TWAI) Integrated USB Serial/JTAG debugging capability Supply voltage range: 3.0 V to 3.6 V Operating temperature: −40°C to +65°C Surface-mount module with integrated PCB antenna Supports secure boot, flash encryption, and hardware cryptographic acceleration for secure IoT devices. Typical Applications Smart home and IoT devices Edge AI and machine learning Voice assistants and speech recognition Industrial automation Human-machine interfaces (HMI) Wireless sensors and gateways Smart displays and touch panels Audio streaming and multimedia devices Robotics and connected products #RF-Transceiver #Module #ESP32
140 Uses
3 Stars
TB6612FNG,C,8,EL
Motor Driver Power MOSFET Parallel 24-SSOP The TB6612FNG,C,8,EL is a dual H-bridge motor driver IC developed by Toshiba. It is designed to control the speed and direction of two DC motors or one bipolar stepper motor. This device uses low ON-resistance MOSFETs for efficient operation, resulting in lower heat generation and higher efficiency compared to traditional bipolar transistor-based drivers. It is widely used in robotics, motor control applications, and embedded systems. Key Features Motor Drive Capability Dual H-bridge driver (can drive 2 DC motors or 1 stepper motor) Output current: 1.2 A (continuous) per channel 3.2 A (peak) per channel Wide motor supply voltage range: 2.5 V to 13.5 V Logic & Control Logic supply voltage (VCC): 2.7 V to 5.5 V Compatible with 3.3 V and 5 V microcontrollers (e.g., ESP32, Arduino) Control inputs: IN1, IN2 (per channel for direction control) PWM input for speed control STBY (standby mode for power saving) Efficiency & Performance Low ON-resistance MOSFETs: Reduces power loss and heat High efficiency compared to L298N-type drivers Built-in shoot-through protection Protection Features Thermal shutdown protection Overcurrent protection Under voltage lockout (UVLO) #Commonpartslibrary #Motordriver #Integratedcircuit #TB6612
76.8k Uses
3 Stars
ESP32-C6-WROOM-1-N4
802.15.4 Bluetooth, Wi-Fi Bluetooth v5.0, ZigBee® Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N4 is based on the ESP32-C6 single-core RISC-V microcontroller, integrating advanced wireless standards and secure connectivity in a small module format. It is designed for next-generation IoT devices that require Wi-Fi 6 efficiency, mesh networking, and Bluetooth Low Energy support. Processor: 32-bit RISC-V single-core CPU (up to 160 MHz) Wireless Connectivity: Wi-Fi 6 (802.11ax, 2.4 GHz) Bluetooth LE 5.0 IEEE 802.15.4 (Thread / Zigbee support) Memory (N4 variant): 4 MB Flash Security: Secure boot Flash encryption Cryptographic hardware acceleration #commonpartslibrary #rf #wireless #transceiver #module #zigbee
363 Uses
3 Stars
