Timers and RTCs
Timers and Real-Time Clocks (RTCs) are electronic devices that are used to measure time or keep track of the current time. They can be found in a wide range of applications, including computers, phones, and appliances. Timers are used to trigger an action after a specific period of time has elapsed. They can be used to control the duration of an event, or to schedule tasks to be performed at a later time. RTCs, on the other hand, are used to maintain accurate time even when the device is powered off. They are often used in devices that need to keep track of the current time and date, such as alarm clocks and smart thermostats. If you're looking for high-quality timers and RTCs for your electronic projects, you should check out Flux.ai. They have the world's largest community-driven public library of timers and RTCs, with footprints, symbols, datasheets, and simulation models. This makes it easy for you to find the components you need for your project, and ensures that you have access to accurate and up-to-date information about each component. Whether you're a professional engineer or a hobbyist, Flux.ai has the resources you need to get your project off the ground.
BQ25628ERYKR
I²C-Controlled Single-Cell Buck Battery Charger IC with Power Path Management – Highly integrated switch-mode battery charger for single-cell Li-Ion/Li-Polymer batteries used in portable electronics, IoT devices, wearables, handheld terminals, medical devices, and embedded battery-powered systems. Operates from a 3.5 V to 18 V input supply and delivers up to 2 A programmable charging current with support for USB and adapter inputs. Features NVDC power-path management, I²C interface, integrated power MOSFETs, narrow VDC architecture, dynamic power management, input current optimization, buck charging efficiency up to 93%, and an integrated 12-bit ADC for monitoring battery voltage, charge current, input voltage/current, system voltage, and temperature. Includes JEITA temperature profile support, programmable charging parameters, USB OTG boost mode (5 V output), power-good indication, and comprehensive protection including overvoltage, overcurrent, thermal regulation, thermal shutdown, watchdog timer, and short-circuit protection. Operates over a −40°C to +85°C temperature range and is housed in a compact 18-pin WQFN-HR (3 × 2.5 mm) package. #TexasInstruments #BQ25628ERYKR #BQ25628E #BatteryCharger #LiIonCharger #PowerPathManagement #BuckCharger #USBOTG #I2C #PowerManagement #PortableElectronics #EmbeddedSystems
6 Uses0 StarsTPS3436CFDBEDDFRQ1
Supervisor Open Drain or Open Collector 1 Channel TSOT-23-8 TPS3436CFDBEDDFRQ1 – Automotive precision window watchdog timer that monitors system operation by supervising watchdog timing and asserting a reset output when timing faults occur. It operates from a 1.04 V to 6.0 V supply, draws 250 nA typical quiescent current, supports factory-programmed or user-programmable watchdog timeout and reset delay, and provides active-low open-drain or push-pull outputs with watchdog enable/disable, startup delay, manual reset, and latched output options. #TexasInstruments #TPS3436CFDBEDDFRQ1 #WatchdogTimer #WindowWatchdog #AutomotiveIC #VoltageSupervisor #ResetSupervisor #NanoPower #EmbeddedSystems #PCBComponents
2 Uses0 StarsAT32F421K8U7
ARM-based 32-bit Cortex-M4 MCU with Flash, timers, ADC, CMP and communication interfaces Microcontroller based on an ARM® Cortex®-M4 core, designed for embedded control applications with a maximum operating frequency of 120 MHz. It operates from a 2.4 V to 3.6 V supply, integrates 64 KB Flash, 8 KB SRAM, a 12-bit 2 MSPS ADC, 10 timers, 2× USART, 2× SPI/I²S, 2× I²C, DMA, enhanced RTC, comparator, and is housed in a 32-pin QFN (5 × 5 mm) package. #Microcontroller #ARMCortexM4 #120MHz #64KBFlash #8KBSRAM #12bitADC #DMA #USART #SPI #I2C #QFN32 #ARTERY
1 Uses0 StarsAD5758BCPZ-RL7
Single-Channel 16-Bit Current/Voltage Output DAC with HART® Connectivity – Precision industrial digital-to-analog converter (DAC) for process control, programmable logic controllers (PLC), distributed control systems (DCS), actuator control, industrial automation, and isolated analog output modules. Features 16-bit resolution with a single configurable output supporting current ranges of 0–20 mA, 4–20 mA, 0–24 mA, ±20 mA, ±24 mA, and −1 mA to +22 mA, as well as voltage ranges of 0–5 V, 0–10 V, ±5 V, and ±10 V. Operates from dual supplies up to ±33 V (60 V maximum across rails) and incorporates Dynamic Power Control (DPC) using an integrated buck converter to minimize power dissipation. Features HART® signal coupling, 12-bit diagnostic ADC, integrated precision reference, SPI interface (up to 50 MHz) with CRC and watchdog timer, programmable gain and offset, output fault protection (±38 V miswire protection), and comprehensive diagnostics for high-reliability industrial systems. Designed for −40°C to +115°C operation and housed in a compact 32-lead LFCSP (5 × 5 mm) package. #AnalogDevices #AD5758BCPZRL7 #AD5758 #DAC #IndustrialDAC #CurrentLoop #VoltageOutput #420mA #HART #PLC #ProcessControl #SPI #EmbeddedSystems
3 Uses0 StarsPIC16LF19156-I_MV
PIC PIC® XLP™ 16F Microcontroller IC 8-Bit 32MHz 28KB (16K x 14) FLASH 28-UQFN (4x4) 8-bit PIC microcontroller for embedded control applications, operating from a 1.8 V to 3.6 V supply with a maximum CPU frequency of 32 MHz. It integrates 28 KB Flash, 2 KB RAM, 256 bytes EEPROM, a 12-bit ADC with up to 20 channels, 5-bit DAC, SPI, I²C, and EUSART interfaces, 24 GPIOs, LCD controller support, multiple timers, PWM, comparators, and Core Independent Peripherals in a 28-pin UQFN package. #Microcontroller #8BitMCU #PIC16LF19156 #Microchip #EmbeddedSystems #FlashMCU #LowPower #12BitADC #SPI #I2C #EUSART #PWM #LCDController #UQFN28 #PCBLibrary
0 Uses0 Stars
