Switches

Buck Switching Regulator IC Positive Adjustable 0.6V, 1.265V 2 Output 1.3A, 1.1A 28-TSSOP (0.173", 4.40mm Width) Exposed Pad The LT3641EFE#PBF specification defines the engineering requirements for a dual-channel step-down switching regulator integrated circuit designed for high-efficiency power conversion and distribution applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure stable voltage regulation, efficient power delivery, and long-term operational reliability in industrial, embedded, communication, and control systems. The device is intended for use in distributed power architectures, industrial automation equipment, instrumentation, telecommunications systems, automotive electronics, and embedded applications requiring multiple regulated output voltages from a common input source. The integrated dual-channel architecture enables compact power supply designs while providing high conversion efficiency, low power dissipation, and reliable performance across a wide range of operating conditions. Engineering Requirements The switching regulator shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, efficient power conversion, and dependable long-term reliability. The device shall maintain stable operation under specified input voltage, output load, temperature, and environmental operating conditions. Electrical characteristics shall provide accurate output voltage regulation, high conversion efficiency, low output ripple, and fast transient response. The regulator shall maintain stable switching behavior during startup, shutdown, load variations, and input voltage fluctuations while ensuring reliable power delivery to connected circuits. The integrated control architecture shall support independent regulation of multiple output channels and provide reliable operation during dynamic system conditions. Built-in protection functions shall support safe operation during abnormal events including overload, short-circuit, thermal stress, and fault conditions, thereby enhancing overall system reliability. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical integrity and long-term reliability. The package shall facilitate effective heat dissipation and shall be suitable for automated surface-mount assembly and standard solder reflow manufacturing processes. Mechanical construction shall withstand thermal cycling, vibration, mechanical handling, and environmental exposure without degradation of electrical or structural performance. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect functionality or reliability. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, thermal characterization reports, application guidelines, qualification records, inspection reports, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #SwitchingRegulator #BuckConverter #PowerManagement #DCDCConverter #PowerElectronics #EmbeddedSystems #IndustrialElectronics #QualityAssurance #EngineeringDocumentation

Multiplexer/Demultiplexer 16 x 1:2 56-SSOP The SN74CBT16390 is a 16-bit to 32-bit switch used in applications in which two separate data paths must be multiplexed onto, or demultiplexed from, a single path. This device can be used for memory interleaving, in which two different banks of memory must be addressed simultaneously. This device also can be used to connect or isolate the PCI bus to one or two slots simultaneously. Two output enables (OE1 and OE2) control the data flow. When OE1 is low, A port is connected to 1B port. When OE2 is low, A port is connected to 2B port. When both OE1 and OE2 are low, the A port is connected to both 1B and 2B ports. The control inputs can be driven with a 5-V CMOS, 5-V TTL, or an LVTTL driver. Key Features 16-bit to 32-bit FET multiplexer/demultiplexer bus switch Operates from 4.5 V to 5.5 V Low ON-state resistance for high-speed signal switching Near-zero propagation delay through the switch Dual output-enable (OE1, OE2) controls for flexible routing TTL-compatible control inputs Supports memory interleaving and PCI bus applications Low power consumption ESD protection compliant with JESD22 standards Operating temperature range: −40°C to +85°C Available in a 56-pin SSOP (DL) package #BusSwitch #Multiplexer #Demultiplexer #Widebus #DigitalLogic #HighSpeedInterface #MemoryInterleaving #PCIBus #TexasInstruments #SN74CBT16390 #SSOP56

GANFET N-CH 200V 8.5A DIE The EPC2019 is an enhancement-mode N-channel Gallium Nitride (eGaN®) power transistor designed for high-speed and high-efficiency power conversion applications. With a 200 V drain-to-source voltage rating, 42 mΩ maximum RDS(on), and 8.5 A continuous drain current, it offers significantly lower switching losses than conventional silicon MOSFETs. Its ultra-low gate charge, zero reverse recovery charge (QRR), and fast switching characteristics make it ideal for high-frequency switching circuits. The device is supplied in a bare die (passivated die with solder bars) package for optimized thermal and electrical performance in compact, high-density designs. Key Features Enhancement-mode N-channel eGaN® FET 200 V drain-to-source voltage (VDS) 42 mΩ maximum RDS(on) @ VGS = 5 V 8.5 A continuous drain current Ultra-low gate charge (Qg ≈ 2.9 nC) Zero reverse recovery charge (QRR) for reduced switching losses Supports high-frequency switching operation Gate drive compatible with 0 V OFF / 5 V ON (no negative gate voltage required) Bare die package for compact, high-performance power designs Operating junction temperature: −40°C to +150°C #EPC2019 #eGaN #GaNFET #PowerTransistor #NChannelFET #HighEfficiency #HighSpeedSwitching #PowerElectronics #DCDCConverter #ClassDAudio #EfficientPowerConversion

2 Circuit IC Switch 2:1 10Ohm 10-UQFN (2.0x1.5) The TS5A23157 device is a dual single-pole doublethrow (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. Signals up to 5.5 V (peak) can be transmitted in either direction. Features 1• Low ON-State Resistance (15 Ω at 125℃) • 125℃ Operation • Control Inputs are 5-V Tolerant • Specified Break-Before-Make Switching • Low Charge Injection • Excellent ON-Resistance Matching • Low Total Harmonic Distortion • 1.8-V to 5.5-V Single-Supply Operation • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Performance Tested Per JESD 22 – 2000-V Human-Body Model (A114-B, Class II) – 1000-V Charged-Device Model (C101) 2 Applications • Sample-and-Hold Circuits • Battery-Powered Equipment • Audio and Video Signal Routing • Communication Circuits #commonpartslibrary #integratedcircuit #circuitswitch #TexasInstruments #AnalogSwitch #SPDT #SignalRouting #Multiplexer #LowOnResistance #HighSpeedSwitching #UQFN #EmbeddedSystems #ElectronicsDesign

Voltage Level Translator Unidirectional 1 Circuit 2 Channel 200Mbps 8-X1SON (1.95x1) The TXU0202DTTR specification defines the engineering requirements for a dual-bit voltage level translator integrated circuit designed for bidirectional logic-level conversion between digital interfaces operating at different supply voltages. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure reliable signal translation, high-speed communication, and long-term operational stability in embedded electronic systems. The device is intended for use in embedded controllers, microprocessor and microcontroller systems, communication interfaces, industrial automation equipment, consumer electronics, and portable devices requiring voltage compatibility between digital subsystems. It enables seamless signal transfer while preserving logic integrity, minimizing propagation delay, and supporting low-power operation in compact electronic designs. Engineering Requirements The voltage level translator shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, low power consumption, and dependable long-term reliability. The device shall maintain stable operation under specified voltage, temperature, and environmental operating conditions. Electrical characteristics shall provide accurate bidirectional logic-level translation with low propagation delay, high noise immunity, and reliable input and output switching performance. The device shall maintain signal integrity during continuous operation, power sequencing, and dynamic switching conditions without introducing excessive distortion or timing errors. The integrated translation architecture shall support independent voltage domains while ensuring reliable communication between connected digital devices. The device shall maintain stable performance across varying supply voltages and logic frequencies while minimizing leakage current and preserving overall system efficiency. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical integrity and long-term reliability. The package shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. Mechanical construction shall withstand thermal cycling, vibration, mechanical handling, and environmental exposure without degradation of electrical or mechanical performance. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect functionality or reliability. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, timing diagrams, application guidelines, qualification reports, inspection records, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #VoltageLevelTranslator #LogicLevelShifter #DigitalInterface #EmbeddedSystems #Semiconductor #SignalIntegrity #IndustrialElectronics #QualityAssurance #EngineeringDocumentation

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3.5A SOT-23-6 Thin, TSOT-23-6 The LMR51635YFDDCR specification defines the engineering requirements for a synchronous step-down DC-DC converter integrated circuit designed for high-efficiency power regulation in embedded and industrial electronic systems. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure stable voltage conversion, efficient power management, and long-term operational reliability. The device is intended for use in industrial automation, telecommunications equipment, consumer electronics, test and measurement instruments, distributed power systems, and embedded applications requiring regulated low-voltage power rails from higher-voltage DC sources. It integrates high-performance switching circuitry to provide efficient voltage conversion while minimizing external component count and overall system power loss. Engineering Requirements The DC-DC converter shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, low power consumption, and reliable long-term operation. The device shall maintain stable functionality under specified input voltage, output load, temperature, and environmental operating conditions. Electrical characteristics shall provide accurate output voltage regulation, high conversion efficiency, low output ripple, and fast transient response during load and input voltage variations. The converter shall maintain stable switching operation while supporting continuous and dynamic power delivery with minimal performance degradation. The integrated control architecture shall ensure reliable startup, controlled shutdown, and stable operation under varying load conditions. Built-in protection mechanisms shall support safe operation during abnormal conditions, including overload, overcurrent, thermal stress, and short-circuit events, thereby enhancing overall system reliability. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical integrity and long-term reliability. The package shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. Mechanical construction shall withstand thermal cycling, vibration, mechanical handling, and environmental exposure without degradation of electrical or mechanical performance. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect device functionality or reliability. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, application guidelines, thermal characterization reports, qualification records, inspection reports, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #DCDCConverter #BuckConverter #PowerManagement #PowerElectronics #EmbeddedSystems #IndustrialElectronics #VoltageRegulator #QualityAssurance #EngineeringDocumentation

The JS102011SCQN specification defines the engineering requirements for a miniature slide switch designed for manual circuit selection and control in electronic systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure reliable switching performance, secure mechanical operation, and long-term operational stability across a wide range of embedded, industrial, instrumentation, and consumer electronic applications. The switch is intended for use in applications requiring manual selection between electrical circuits or operating modes, including embedded control systems, communication equipment, instrumentation, portable devices, and industrial electronics. It provides dependable contact switching with positive actuator engagement, low contact resistance, and consistent electrical performance throughout its service life. Engineering Requirements The slide switch shall be manufactured using precision-formed conductive contacts, durable actuator materials, and high-strength insulating components to ensure reliable electrical continuity and mechanical durability. The construction shall support repeated actuation while maintaining stable switching characteristics and mechanical integrity. Electrical characteristics shall provide low contact resistance, reliable insulation between isolated contacts, and consistent switching performance under specified voltage, current, and environmental operating conditions. The switch shall maintain dependable electrical continuity without intermittent contact or excessive wear during its rated mechanical life. The switching mechanism shall provide positive tactile feedback and accurate contact positioning to ensure repeatable operation and minimize accidental actuation. Mechanical construction shall withstand vibration, thermal cycling, mechanical shock, and normal handling without degradation of switching performance or structural integrity. The package shall be suitable for standard printed circuit board assembly and compatible with automated or manual soldering processes. Workmanship shall be free from defects including contamination, contact deformation, actuator damage, plating irregularities, or structural inconsistencies that could adversely affect electrical or mechanical reliability. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, mechanical characteristics, qualification reports, inspection records, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #SlideSwitch #ManualSwitch #ElectromechanicalComponent #ElectronicSwitch #EmbeddedSystems #IndustrialElectronics #QualityAssurance #EngineeringDocumentation #ElectronicComponents

USB Switch IC 2 Channel 10-VSON (3x3) The TS3USB221DRCR specification defines the engineering requirements for a high-speed USB analog switch integrated circuit designed for signal routing and interface switching in embedded electronic systems. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure reliable high-speed signal transmission, low insertion loss, and long-term operational stability. The device is intended for use in USB interface switching, portable electronics, embedded controllers, communication equipment, docking stations, and multimedia systems requiring high-speed differential signal routing. It enables seamless switching between USB data paths while maintaining signal integrity, minimizing propagation delay, and supporting reliable operation in compact, high-performance electronic designs. Engineering Requirements The analog switch shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent switching performance, low power consumption, and dependable long-term reliability. The device shall maintain stable operation under specified voltage, temperature, and environmental conditions. Electrical characteristics shall provide low on-resistance, low capacitance, minimal insertion loss, and excellent channel-to-channel matching to preserve high-speed USB signal integrity. The device shall support reliable differential signal switching with minimal distortion, low propagation delay, and low crosstalk during continuous operation. The switching architecture shall provide dependable channel selection, high isolation between signal paths, and predictable switching behavior during power-up, power-down, and dynamic operating conditions. The device shall maintain stable electrical performance while minimizing electromagnetic interference and signal degradation. Thermal performance shall support continuous operation within the specified junction temperature range while maintaining electrical integrity and reliability. The package shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. Mechanical construction shall withstand vibration, thermal cycling, mechanical handling, and environmental exposure without degradation of performance. Workmanship shall be free from defects including contamination, package cracking, bond failures, lead deformation, or structural inconsistencies that could adversely affect electrical or mechanical reliability. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, application guidelines, qualification reports, inspection records, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #USBAnalogSwitch #HighSpeedSwitch #USBInterface #SignalIntegrity #EmbeddedSystems #Semiconductor #ElectronicDesign #QualityAssurance #EngineeringDocumentation