Battery Management ICs
A Battery Management IC is a specialized microcontroller that monitors and manages the charging and discharging of a lithium-ion or other type of battery. These ICs are essential for ensuring the safe and efficient operation of batteries in a wide range of applications, including portable electronics, electric vehicles, and renewable energy systems. One of the key functions of a Battery Management IC is to optimize the charging and discharging of a battery by controlling the flow of current. This can help to extend the life of the battery and improve its overall performance. In addition to controlling the charging and discharging of a battery, a Battery Management IC can also perform other functions such as monitoring the temperature and voltage of the battery, protecting the battery from overcharge and overdischarge, and providing diagnostic information about the battery's health. Flux.ai has the world's largest community-driven public library of Battery Management ICs, with footprints, symbols, datasheets, and simulation models available for use. Whether you are a designer, engineer, or researcher, the Flux.ai library is an invaluable resource for finding the right Battery Management IC for your project.
1714971
2 Position Wire to Board Terminal Block Horizontal with Board 0.375" (9.53mm) Through Hole # 1714971 ## General Description The 1714971 is a high-current printed circuit board terminal block manufactured by Phoenix Contact and designed for secure power and signal connections in industrial and commercial electronic equipment. The component utilizes a screw-clamp termination mechanism that provides reliable wire retention, low contact resistance, and long-term electrical stability. Its robust construction and through-hole mounting design make it suitable for applications requiring dependable field wiring, high-current handling capability, and resistance to mechanical stress. The terminal block is commonly used in power supplies, industrial automation systems, motor controllers, battery management systems, energy distribution equipment, instrumentation, and other applications requiring secure PCB-mounted power connections. ## Key Features ### Mechanical Characteristics * Through-hole PCB mounting * Screw-clamp wire termination * Side-entry wire connection * High-strength housing construction * Secure field-wire installation * Designed for repeated maintenance and servicing operations ### Electrical Characteristics * High-current carrying capability * Low contact resistance * Reliable electrical conductivity * Stable performance under demanding operating conditions * Suitable for power distribution and control applications ### Contact System * Corrosion-resistant conductive contacts * Screw-actuated clamping mechanism * Secure conductor retention * Reliable electrical connection during vibration and mechanical stress ### Material Construction * Industrial-grade thermoplastic housing * High-conductivity metal contacts * Flame-resistant insulation materials * RoHS-compliant construction ### Environmental Characteristics * Suitable for industrial environments * Resistant to mechanical wear * Durable under continuous operation * Designed for long service life ### Application Areas * Industrial Automation Equipment * Power Supply Systems * Motor Control Circuits * Battery Management Systems * Renewable Energy Equipment * Electrical Distribution Panels * Instrumentation Systems * Process Control Equipment * Embedded Power Electronics * Industrial Control Systems ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade PCB Interconnect Solution ## Manufacturer Phoenix Contact ## Product Family COMBICON PCB Terminal Blocks #PhoenixContact #1714971 #COMBICON #TerminalBlock #PCBTerminalBlock #ScrewTerminal #PowerConnector #IndustrialElectronics #PowerDistribution #IndustrialAutomation #EmbeddedSystems #ControlSystems #ElectronicsDesign #PCBAssembly #ElectricalEngineering
16 Uses0 StarsACS758LCB-100B-PFF-T
Current Sensor 100A 1 Channel Hall Effect, Open Loop Bidirectional 5-CB Formed Leads, PFF The ACS758LCB-100B-PFF-T is a fully integrated Hall-effect current sensor IC from Allegro MicroSystems, designed for accurate and electrically isolated measurement of both AC and DC currents up to ±100 A. It incorporates a precision Hall sensing element positioned near a low-resistance copper current conductor, producing an analog output voltage proportional to the sensed current. The device offers galvanic isolation between the current path and signal pins, making it ideal for high-voltage and high-current applications such as motor drives, power supplies, inverters, battery management systems, and overcurrent protection circuits. Key Features Hall-effect based current sensing for AC and DC currents up to ±100 A Galvanic isolation between current conductor and signal circuitry 120 kHz typical bandwidth for fast current measurement 3 µs typical response time to step current changes 20 mV/A typical sensitivity Ultra-low 100 µΩ internal conductor resistance for minimal power loss Factory-trimmed gain and offset for improved accuracy Typical total output error of 2.4% over temperature Integrated electrostatic shield for improved immunity to high dV/dt and electrical noise Single-supply operation from 3.0 V to 5.5 V High reliability monolithic Hall IC architecture AEC-Q100 qualified for automotive applications Operating temperature range of -40°C to +150°C #ACS758LCB100BPFFT #ACS758 #CurrentSensor #HallEffectSensor #CurrentMonitoring #PowerElectronics #MotorControl #OvercurrentProtection #BatteryManagement #AutomotiveElectronics #AllegroMicroSystems #HighCurrentSensing #DCCurrentSensor #ACCurrentSensor #IndustrialAutomation #commonpartslibrary #currentsensor
34 Uses0 Stars7461147
WP-BUFU REDCUBE Bush, full height: 7mm, total height: 10.5mm, thread length: 4mm, pin length: 3.5mm, raster: 2.54mm, REDCUBE Press-Fit; M5, blind 4mm 16 Pin Screw Terminal, Power Tap M5 Through Hole The 7461147 is a high-current PCB-mounted power terminal from the REDCUBE® WP-BUFU series by Würth Elektronik. It is designed to provide a robust and low-resistance connection for transferring high currents between cables, busbars, and printed circuit boards. The terminal utilizes press-fit technology, eliminating the need for soldering while ensuring a gas-tight, vibration-resistant electrical connection. It is particularly suitable for power distribution, industrial equipment, automotive electronics, battery systems, and renewable energy applications. Key Features High current rating up to 180 A M5 screw terminal for secure high-power connections Press-fit termination for solderless PCB assembly 16-pin through-hole mounting configuration Gas-tight electrical connection for long-term reliability Excellent resistance to vibration and mechanical shock Low contact resistance for efficient power transfer Simplifies manufacturing by eliminating soldering processes Suitable for high-current power distribution and battery applications RoHS compliant design Typical Applications Power supplies and power converters Battery management and energy storage systems DC-DC and DC-AC converters Industrial automation equipment Automotive power electronics Solar and wind energy systems High-current PCB power distribution networks #CommonPartsLibrary #REDCUBE #PowerTerminal #PressFit #HighCurrentConnector #PCBTerminal #WurthElektronik #IndustrialElectronics #AutomotiveElectronics #PowerDistribution #EnergyStorage #RenewableEnergy #7461147
151 Uses0 StarsRK809-5
Rockchip RK809 highly integrated PMIC with audio codec for multi-core system applications, providing five configurable synchronous step-down converters, nine LDO regulators, two switches, battery fuel gauge, configurable power-up/power-down sequencing, integrated RTC with 32.768kHz clock support, I2C interface for voltage and fuel gauge control, dynamic DC/DC output voltage adjustment, soft-start on all channels, 2MHz switching frequency, integrated power switches, headphone driver and Class-D audio driver, QFN68 7.0 x 7.0mm package. Search Keywords: RK809, Rockchip RK809, RK809 PMIC, RK809 power management IC, RK809 codec PMIC, RK809 battery fuel gauge, RK809 audio codec, RK809 DC DC converter, RK809 LDO regulator, RK809 I2C PMIC, RK809 RTC, RK809 QFN68, Rockchip PMIC, RK809 datasheet Hashtags: #RK809 #RockchipRK809 #RockchipPMIC #PMIC #PowerManagementIC #AudioCodecPMIC #BatteryFuelGauge #DCDCConverter #LDORegulator #I2CPMIC #RTC #ClassDAudio #QFN68
1 Uses0 StarsRK809-5
QFN-68-EP(7x7) Power Management - Specialized RoHS The RK809-5 is a highly integrated Power Management Integrated Circuit (PMIC) from Rockchip designed for multi-core processor systems and embedded applications. It provides a complete power management solution by integrating multiple high-efficiency DC-DC buck converters, LDO regulators, power sequencing logic, battery fuel gauging, RTC functionality, and audio codec capabilities into a single device. The RK809-5 is commonly used alongside Rockchip SoCs in single-board computers, tablets, AIoT devices, and industrial embedded systems. Key Features Five high-efficiency synchronous buck converters with fast transient response. Nine low-dropout (LDO) voltage regulators for powering sensitive analog and digital circuits. Integrated battery fuel gauge for battery capacity monitoring. Configurable power-up and power-down sequencing (OTP programmable). Dynamic Voltage Scaling (DVS/DVFS) support via I²C interface. Integrated Real-Time Clock (RTC) with 32.768 kHz crystal oscillator support. Two integrated load switches for peripheral power control. Over-current, over-voltage, and thermal protection features. Built-in audio CODEC with headphone driver and Class-D amplifier support. Designed to minimize external component count and simplify power system design. QFN-68-EP (7 mm × 7 mm) package. #RK8095 #RK809 #Rockchip #PMIC #PowerManagementIC #BatteryManagement #AudioCodec #RTC #DVFS #EmbeddedSystems #SingleBoardComputer #IoT #IndustrialElectronics #PowerSupplyDesign #ElectronicsEngineering
6 Uses0 StarsAEM13921-QFN
Ultra Efficient Dual Sources Energy Manager with Ratio/Constant Voltage Regulation, Regulated Buck Output and 5 V Charger, 120 mV, 135 mA The AEM13921 is a fully integrated and compact power management circuit that extracts DC power from two harvesting sources to store energy in a rechargeable storage element and supply an application circuit. A 5 V input can also be used to charge the storage element (e.g., if it gets depleted). This compact and ultra-efficient PMIC allows for extending battery lifetime and eliminating the primary energy storage in a large range of applications. Both sources implement Maximum Power Point Tracking (MPPT) based on open-circuit voltage ratio as well as constant source voltage regulation features, allowing for harvesting the maximum power available from each source to charge the storage element. With its unique cold-start circuit, it can start operating with an input voltage as low as 275 mV (min. 1.5 µW power). The configurable protection thresholds prevent overcharging and overdischarging the storage element. No external components are required to set those thresholds. The thermal monitoring prevents charging and discharging the storage element outside a configurable temperature range. The Average Power Monitoring (APM) allows the application circuit to get an estimate of the energy harvested from each source to the battery and from the battery to the application circuit. A shipping mode is available to avoid charging and discharging the storage element during shipping or storage. A buck regulator with selectable output voltage allows an application circuit to be supplied with high efficiency. I²C communication allows users to control every setting of the AEM13921 from the application circuit MCU. Features and Benefits Dual sources inputs - Boost operation optimized for each source. - Conversion efficiency above 90 % on each source. - Harvests from 120 mV after cold start. - Simultaneous harvesting from both sources. - Up to 135 mA current extracted from the harvester. Maximum Power Point Tracking - Both sources configurable to constant voltage mode or to open-circuit voltage ratio mode. - Optimal harvesting from a multiple combinations of harvesters (PV cells, RF, vibration, pulsed sources...). Cold start from 275 mV / 1.5 µW input - Startup at ultra-low power from each harvesting source input. Configurable overdischarge & overcharge protection - Supports various types of rechargeable storage elements (LiC, Li-ion, LiPo, Li-ceramic pouch...). Regulated output for application circuit - Buck regulator conversion efficiency up to 96 %. - Selectable output voltage between 0.6 V and 3.3 V. - Output current up to 100 mA. Thermal monitoring - Storage element protection against overtemperature and under-temperature during charging and discharging, independently. Average Power Monitoring - Provides data to determine how much energy has been transferred to the storage from each source and from the 5 V charger, as well as the energy drained from the storage to supply the application circuit. System configuration by GPIO or I²C communication - All settings dynamically configurable through GPIO or I²C (Fast Mode Plus). - System data available through I²C. Shipping mode - Storage element charge and discharge disabling during shipment. External 5 V charging capability - Extra charging input for 5 V power supplies. - Configurable CC and CV modes (max. 135 mA). - Provides a fast charging alternative when no source is available for a long time. #AEM13921 #EnergyHarvesting #PowerManagementIC #PMIC #MPPT #BatteryCharging #EnergyAutonomous #IoT #WirelessSensor #IndustrialMonitoring #EmbeddedSystems #QFN #epeas #LowPowerDesign
2 Uses0 StarsBQ29209DRBR
BQ29209DRBR – Integrated 2-cell Li-ion/Li-polymer battery protection and management IC. Provides overvoltage, undervoltage, and overcurrent protection for each cell while incorporating automatic cell balancing to maintain uniform charge levels. Designed for compact 2S battery pack applications, it ensures safe and reliable operation in portable electronics, battery-powered devices, and custom BMS circuits. Ideal for extending battery life, preventing overcharge or deep discharge, and supporting high-efficiency energy management. #2SLiIonBMS #BatteryProtectionIC #CellBalancing #OvervoltageProtection #UndervoltageProtection #OvercurrentProtection #PortableElectronics #BMSDesign
20 Uses0 StarsAO3401
MOSFET P-CH 30V 4.1A SOT-23 The AO3401 is a 30 V P-Channel Enhancement Mode MOSFET designed for high-efficiency power switching applications. It uses advanced trench MOSFET technology to achieve low on-resistance (RDS(on)), low gate charge, and fast switching performance. Packaged in a compact SOT-23 package, it is widely used in load switching, battery-powered devices, reverse-polarity protection circuits, and power management applications. Key Features P-Channel MOSFET Drain-Source Voltage (VDS): −30 V Continuous Drain Current (ID): up to −4 A (25°C) Low RDS(on): 50 mΩ max @ VGS = −10 V 60 mΩ max @ VGS = −4.5 V 85 mΩ max @ VGS = −2.5 V Low Gate Charge: 7 nC typical @ 4.5 V Gate-Source Voltage Rating: ±12 V Low Threshold Voltage: −0.5 V to −1.3 V Fast Switching Characteristics Compact SOT-23 Surface-Mount Package Operating Junction Temperature: up to 150°C Suitable for Low-Voltage Logic-Level Drive Applications Typical Applications Load switches Battery protection circuits Reverse-polarity protection Power-path management DC-DC converters Portable and battery-powered electronics PWM switching applications #CommonPartsLibrary #Transistor #FET #Mosfet
27 Uses0 StarsBQ24040DSQT
Battery Management ICs BQ24040DSQT WSON-10_L2.0-W2.0-P0.40-TL-EP LCSC Part Number: C2876332 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ2404x highly integrated single-cell Li-Ion/Li-Pol linear battery charger IC for space-limited portable applications, supports USB or AC adapter input, selectable 100mA or 500mA USB input current limit, 1% charge voltage accuracy, 10% charge current accuracy, programmable charge termination and precharge thresholds, 4.35V chemistry support on BQ24045, 30V input rating with 6.6V or 7.1V input overvoltage protection, dynamic power management, thermal regulation and 150°C thermal shutdown, OUT short-circuit and ISET short protection, JEITA battery NTC operation, fixed 10-hour safety timer, status indication, available in 10-pin 2x2mm WSON/DFN package. Search Keywords: BQ2404x, BQ24040, BQ24041, BQ24045, Texas Instruments BQ24040, Texas Instruments BQ24041, Texas Instruments BQ24045, TI BQ2404x, BQ24040 battery charger, BQ24041 battery charger, BQ24045 battery charger, single cell Li-Ion charger, Li-Pol battery charger IC, USB battery charger IC, 500mA battery charger, 100mA USB charger, linear battery charger, 4.35V Li-Ion charger, WSON-10 charger, DFN-10 battery charger, 2x2mm charger IC Hashtags: #BQ2404x #BQ24040 #BQ24041 #BQ24045 #TexasInstrumentsBQ24040 #TIBatteryCharger #BatteryChargerIC #LiIonCharger #LiPolCharger #SingleCellCharger #USBChargerIC #LinearBatteryCharger #500mACharger #100mAUSBCharger #435VCharger #JEITACharger #NTCBatteryCharger #WSON10 #DFN10 #2x2mmPackage
35 Uses0 Stars
