Battery Management ICs

Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-WSON (2x2) The TMP117AIDRVR is a high-precision digital temperature sensor manufactured by Texas Instruments. The device provides accurate temperature measurements through an I²C-compatible digital interface and is optimized for applications requiring medical-grade accuracy, low power consumption, and compact PCB footprint. The sensor integrates a precision temperature sensing element, analog-to-digital converter, calibration memory, and digital interface into a single compact package. The device supports continuous conversion and shutdown operating modes, enabling efficient thermal monitoring in battery-powered and always-on systems. Internal calibration minimizes external component requirements while providing highly linear and repeatable temperature measurements across an extended operating range. The TMP117AIDRVR is commonly used in industrial controls, wearable electronics, healthcare equipment, environmental monitoring systems, battery management systems, consumer electronics, and precision instrumentation. Electrical Characteristics Supply voltage supports low-voltage digital systems and portable electronics applications. Ultra-low operating current enables long battery life in energy-sensitive designs. Integrated EEPROM allows programmable offset correction and configuration storage. Digital output eliminates the need for external ADC circuitry. High measurement resolution supports precision thermal monitoring applications. Low self-heating characteristics improve measurement stability and accuracy. Functional Features High-accuracy digital temperature sensing. I²C and SMBus compatible communication interface. Programmable alert functionality for thermal threshold monitoring. Continuous conversion and low-power shutdown operating modes. Integrated non-volatile memory for user configuration storage. Wide operating temperature range for industrial and commercial environments. Fast conversion timing suitable for real-time monitoring systems. Factory-calibrated performance requiring minimal external calibration. Package Information Package type is WSON with compact surface-mount footprint suitable for dense PCB layouts. Moisture-sensitive package designed for automated assembly processes. Lead-free and RoHS-compliant construction. Typical Applications Medical thermometers and patient monitoring systems. Industrial temperature monitoring equipment. Battery-powered portable electronics. HVAC and environmental sensing systems. Data acquisition and instrumentation systems. Server and embedded thermal management applications. Consumer electronics requiring precision thermal sensing. #commonpartslibrary #integratedcircuit #temperaturesensor

Battery Power Management IC Lithium Ion/Polymer 32-QFN (5x5) #commonpartslibrary #integratedcircuit #powermanagement #batterymanagement

Power Switch/Driver 1:1 P-Channel 2A SOT-23-5 The GLF1100 is an ultra-efficiency, 2 A rated, Load Switch with integrated slew rate control. The best in class efficiency makes it an ideal chose for use in IoT, mobile, and wearable electronics. The GLF1100 features ultra-efficient IQSmartTM technology that supports the lowest quiescent current (IQ) and shutdown current (ISD) in the industry. Low IQ and ISD solutions help designers to reduce parasitic leakage current, improve system efficiency, and increase battery lifetime. The GLF1100 integrated slew rate control can also enhance system reliability by mitigating bus voltage swings during switching events. Where uncontrolled switches can generate high inrush currents that result in voltage droop and/or bus reset events, the GLF slew rate control specifically limits inrush currents during turn-on to minimize voltage droop. GLF1100 Load Switch devices support an industry leading wide input voltage range and helps to improve operating life and system robustness. Furthermore, one device can be used in multiple voltage rail applications which helps to simplify inventory management and reduce operating cost. FEATURES • Wide Input Range: 1.1 V to 5.5 V 6 V abs max • RON : 82 mΩ Typ @ 5.5 VIN • IOUT Max: 2 A • Ultra-Low IQ: 10 nA Typ @ 5.5 VIN • Ultra-Low ISD: 25 nA Typ @ 5.5 VIN • Controlled Rise Time: 2.2 ms at 3.3 VIN • Internal EN Pull-Down Resistor • Integrated Output Discharge Switch • Wide Operating Temperature Range: -40 °C ~ 85 °C • HBM: 6 kV, CDM: 2 kV APPLICATIONS • Telecommunication Module • Low Power Subsystem • Mobile Devices #commonpartslibrary #integratedcircuit #powermanagement #LoadSwitch #PowerManagement #PMIC #HighSideSwitch #LowPower #BatteryPowered #PortableElectronics #GLFIntegratedPower #SOT23 #PowerDistribution

1 mOhms ±1% 4W Chip Resistor Nonstandard Automotive AEC-Q200, Current Sense Metal Element Bourns Inc. CSS4J-4026R-1L00F is a high-power surface-mount current sense resistor designed for accurate current measurement in power electronics applications. It belongs to the CSS4J-4026 series and uses a metal element construction that provides low resistance, high power handling, and excellent stability for automotive and industrial applications. This device features a 1 mΩ resistance value, ±1% tolerance, and 4 W power rating, making it suitable for monitoring high-current paths while minimizing measurement losses. It is also qualified for AEC-Q200 automotive applications and operates across a wide temperature range. Key Features Component Type: SMD Current Sense Resistor (Metal Element / Metal Strip) Resistance Value: 1 mΩ (0.001 Ω) Resistance Tolerance: ±1% Power Rating: 4 W Package Size: 4026 (approx. 10.06 mm × 6.60 mm) Number of Terminals: 4 terminals (Kelvin sensing configuration) Temperature Coefficient: approximately ±75 ppm/°C Operating Temperature Range: −55°C to +170°C Construction: Metal element current shunt resistor for accurate current measurement Qualification: Automotive AEC-Q200 compliant Typical Applications Battery Management Systems (BMS) EV and automotive power systems Motor control circuits Power supplies and DC/DC converters Overcurrent monitoring and protection circuits Industrial power monitoring equipment #CommonPartsLibrary #Bourns #CSS4J4026 #CurrentSenseResistor #ShuntResistor #MetalElementResistor #AECQ200 #PowerElectronics #BatteryManagementSystem #EVElectronics #SMTComponents #PCBDesign

0.5 mOhms ±1% 5W Chip Resistor Nonstandard Automotive AEC-Q200, Current Sense Metal Element # Engineering Specification ## Product Name CSS4J-4026R-L500F ## General Description CSS4J-4026R-L500F is a precision four-terminal Kelvin current sense shunt resistor designed for accurate current measurement in high-performance electronic and power management systems. The device is intended for use in applications requiring low resistance sensing, high measurement accuracy, and stable thermal performance under varying electrical loads. The component utilizes a metal element resistive structure optimized for minimal resistance drift, reduced temperature effects, and consistent long-term stability. Its four-terminal Kelvin configuration separates current flow and voltage sensing paths, enabling improved measurement accuracy by eliminating errors caused by PCB trace and connection resistance. The device is widely used in power conversion systems, battery monitoring systems, motor control circuits, and industrial power electronics where precise current feedback is essential for control, protection, and monitoring functions. Its surface-mount construction supports compact PCB layouts and automated assembly processes while maintaining robust mechanical and electrical reliability. The design emphasizes efficient heat dissipation, stable electrical characteristics, and compatibility with demanding industrial and automotive environments. It is suitable for integration into systems requiring continuous current monitoring and high measurement fidelity. ## Functional Requirements ### Current Measurement The device shall provide accurate current sensing through a low-resistance conductive path designed for minimal measurement error. ### Kelvin Sensing Operation The device shall support four-terminal Kelvin sensing to improve measurement accuracy by separating current and voltage sensing paths. ### Signal Stability The device shall maintain stable sensing characteristics under varying load and thermal conditions. ### System Integration The component shall support integration into power electronics and embedded control systems requiring precise current feedback. ## Electrical Requirements ### Low Resistance Operation The device shall exhibit very low resistance to minimize power loss and maintain measurement accuracy. ### Thermal Stability The resistor shall maintain consistent electrical behavior under elevated operating temperatures and thermal cycling conditions. ### Power Handling The device shall support operation in high-current environments typical of power conversion and motor control systems. ### Measurement Accuracy The design shall support precise voltage drop measurement proportional to current flow for control and monitoring applications. ## Mechanical Requirements ### Surface Mount Construction The device shall be provided in a surface mount package suitable for automated PCB assembly. ### Structural Integrity The component shall maintain mechanical stability during assembly, operation, and thermal cycling. ### PCB Integration The device shall support direct integration into multilayer printed circuit board designs with optimized current path layout. ## Environmental Requirements ### Operating Conditions The device shall operate reliably under industrial and automotive environmental conditions. ### Thermal Performance The component shall maintain performance stability under continuous electrical loading and heat generation. ### Storage and Handling The device shall maintain physical and electrical integrity during storage, transport, and handling procedures. ## Quality Requirements ### Reliability The device shall provide long-term stability in resistance value and sensing accuracy under continuous operation. ### Verification Electrical, thermal, and mechanical characteristics shall be validated through appropriate testing and qualification procedures. ### Compliance The product shall conform to applicable standards for current sensing resistors used in industrial and automotive electronics. ## Documentation Requirements Technical documentation shall include application guidelines, layout recommendations for Kelvin sensing, thermal considerations, electrical characteristics, and integration practices for power electronics systems. ## Classification Tags #CSS4J4026RL500F #CurrentSenseResistor #ShuntResistor #KelvinSensing #FourTerminalResistor #PowerElectronics #BatteryManagement #MotorControl #PowerSupplyDesign #AnalogSensing #ElectricalEngineering #PCBDesign #EmbeddedSystems #IndustrialElectronics #AutomotiveElectronics #CommonPartsLibrary #ComponentLibrary #EngineeringSpecification #TechnicalDocumentation #HighCurrentSensing #PrecisionMeasurement #CircuitDesign

All details fully confirmed across multiple sources. The SS510 is a 5.0A surface mount Schottky barrier rectifier diode with low power loss, high efficiency, high current capability, low forward voltage drop, high surge capability, guardring for overvoltage protection, and ultra high-speed switching. Here's the complete spec. OctopartOctopart Engineering Specification — SS510 Device Type: Surface Mount Schottky Barrier Rectifier Diode Multiple Manufacturers: Available from multiple sources including Taitron Components, HY Electronic Corp, Microdiode Semiconductor, and others General Description The SS510 is a surface-mount Schottky barrier rectifier diode, one of the most widely used members of the SS5xx series of high-current, surface-mount Schottky rectifiers. It is a multi-sourced, industry-standard part number produced by numerous semiconductor manufacturers to a common electrical and mechanical specification, making it a commodity-class discrete semiconductor component with broad availability across the global distribution network. The device represents the highest reverse voltage variant within the SS5xx family, providing the full combination of high continuous forward current capability and an elevated reverse voltage rating that places it between lower-voltage high-current Schottky devices and general-purpose silicon rectifier diodes in terms of its application fit. Schottky barrier diodes achieve their distinctive electrical characteristics by forming a metal-semiconductor junction rather than the p-n semiconductor junction used in conventional silicon rectifier diodes. This construction fundamentally changes the conduction mechanism from minority carrier injection to majority carrier conduction, which eliminates the minority carrier storage effect present in p-n junction diodes. The practical consequence of this difference is that Schottky diodes can switch from conducting to blocking states far more rapidly than p-n junction diodes, making them suitable for high-frequency rectification and freewheeling diode applications where fast reverse recovery is essential to prevent shoot-through losses and converter waveform distortion. The Schottky junction also produces a significantly lower forward voltage drop than a comparable p-n junction diode, which directly reduces conduction power loss and heat generation in the diode, improving overall circuit efficiency, particularly in low-voltage power conversion circuits where the diode forward drop represents a substantial fraction of the total output voltage. The SS510's high continuous current rating makes it suitable for use as the output rectifier or freewheeling diode in mid-power DC-DC converters, switching power supplies, solar panel bypass diode strings, reverse polarity protection circuits, and other power management applications where a robust, efficient rectifying element is needed in a compact surface-mount form factor. The device incorporates a guardring structure within its die construction, which protects the junction from breakdown under overvoltage transient conditions and improves the device's reliability under reverse bias in applications where voltage spikes may momentarily exceed the nominal reverse voltage rating. Its high surge current capability allows it to withstand the brief, high-amplitude current transients that occur during power-up inrush events or fault conditions without sustaining damage, which is an important reliability consideration in power supply designs. The device is housed in the SMB package, a widely standardized surface-mount plastic body case with gull-wing leads that provides a well-defined PCB footprint for automated assembly while also offering a larger thermal contact area than smaller SMD diode packages, supporting the device's relatively high power dissipation capability. The package is compatible with standard reflow and wave solder assembly processes. Spec Sheet Identification Part Number: SS510 Series: SS5xx Surface Mount Schottky Rectifier Family Manufacturer: Multi-sourced commodity part number Functional Classification Device Type: Schottky barrier rectifier diode Junction Type: Metal-semiconductor Schottky junction Configuration: Single diode Electrical Characteristics Reverse Voltage Rating: High-voltage class for Schottky rectifier, highest in SS5xx series Average Forward Current: High continuous current class Peak Forward Surge Current: High surge capability for inrush and transient events Forward Voltage Drop: Low forward voltage drop, characteristic of Schottky junction Reverse Leakage Current: Low reverse leakage class Junction Capacitance: Low junction capacitance, supporting high-speed switching Switching Performance Recovery Type: Ultra high-speed, negligible reverse recovery time Switching Mechanism: Majority carrier conduction, no minority carrier storage Protection Features Guardring: Integrated guardring for overvoltage protection and junction ruggedness Thermal Characteristics Operating Junction Temperature Range: Extended range, standard high-reliability diode class Storage Temperature Range: Matches operating junction temperature limits Thermal Resistance, Junction to Lead: Defined per package specification Thermal Resistance, Junction to Ambient: Defined per PCB copper pad area Package & Mechanical Package Type: SMB (DO-214AA) Mounting Method: Surface mount technology (SMT) Polarity Marking: Cathode band marked on body per standard convention Target Applications Output rectification in DC-DC switching converters Freewheeling diodes in inductive switching circuits Reverse polarity protection Low-voltage power supply rectification Solar panel bypass diodes Battery charging circuits Environmental & Qualification RoHS Compliance: Yes, lead-free per standard multi-source specifications Packaging Supply Format: Tape-and-reel, per manufacturer standard packaging #SS510 #SchottkyDiode #SchottkyRectifier #SurfaceMountDiode #SMBDiode #DO214AA #PowerRectifier #FreewheelDiode #LowForwardVoltage #HighSpeedSwitching #PowerElectronics #DCDCConverter #PowerSupply #ReversePolarity #DiscreteComponent #SemiconductorDiode #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #CommodityPart