Sensors

20 kOhms 0.5W, 1/2W PC Pins Through Hole Trimmer Potentiometer Cermet 25 Turn Top Adjustment 3296W-1-203LF is a 20 kΩ, 3/8-inch square, 25-turn cermet trimming potentiometer with top adjustment and sealed construction, designed for precise circuit calibration and adjustment. It features ±10% resistance tolerance, 0.5 W power rating at 70°C, ±100 ppm/°C temperature coefficient, and an operating temperature range of −55°C to +125°C. Typical applications include voltage/current adjustment, sensor calibration, and precision tuning. #Bourns #3296W #Trimpot #TrimmingPotentiometer #Potentiometer #Cermet #Multiturn #20kOhm #PCBComponent #CircuitCalibration

Linear Voltage Regulator IC Positive Fixed 1 Output 250mA SOT-23-3 Low-Dropout (LDO) Voltage Regulator providing a fixed 3.0 V output at up to 250 mA, with 2.3–6.0 V input range, typically 1.6 µA quiescent current, and up to 350 mV dropout voltage at full load. The MCP1700T-3002E/TT is suitable for battery-powered devices, microcontrollers, sensors, and other low-power applications, and is housed in a 3-pin SOT-23 package. #LDO #VoltageRegulator #LinearRegulator #3VRegulator #Microchip #SOT23 #LowPower #PowerManagement

Barometric Pressure and Temperature Sensor IC – Digital MEMS sensor for measuring absolute pressure from 30 to 110 kPa and temperature. The TDK InvenSense ICP-20100 provides up to 20-bit output resolution, ±1 Pa relative accuracy, and programmable noise performance down to 0.5 Pa RMS. It supports I²C, I3C, and SPI interfaces, with up to 8 kHz output data rate, a 96-byte FIFO, and programmable digital filtering. The device operates from 1.8 V or 3.3 V, with selectable I/O voltage from 1.2 V to 3.3 V, and uses a compact 2 × 2 × 0.8 mm, 10-pin LGA package. Operating temperature is −40°C to +85°C. #TDKInvenSense #ICP20100 #BarometricPressureSensor #PressureSensor #TemperatureSensor #MEMS #I2C #I3C #SPI #EmbeddedSystems

Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-SOIC Dual General-Purpose Operational Amplifier featuring rail-to-rail input/output, a 1 MHz gain-bandwidth product, 0.6 V/µs slew rate, and low 100 µA typical quiescent current per amplifier. The MCP6002-I/SN operates from 1.8 V to 6.0 V and is suitable for analog signal conditioning, active filters, sensor interfaces, photodiode amplifiers, and battery-powered applications; it is housed in an 8-lead SOIC package and rated for -40°C to +85°C. #OperationalAmplifier #OpAmp #DualOpAmp #RailToRail #LowPower #Analog #SignalConditioning #SensorInterface #Microchip

M12 A-coded circular connector featuring a 5-position male PCB interface in a right-angle, panel-mount configuration. It is rated for 60 V and 4 A, with gold-plated copper-alloy contacts, 15 mΩ max. contact resistance, and IP67 protection when mated, making it suitable for industrial automation, sensors, control systems, and other harsh-environment applications. #M12 #CircularConnector #SensorConnector #IndustrialAutomation #PanelMount #RightAngle #IP67 #A-Coded

MicroForce force sensor with a 5 N compression-force range, compensated/amplified piezoresistive sensing, and digital I²C output. It is fully calibrated and temperature compensated, with ±2% FSS typical accuracy, 12-bit resolution, 3.0–3.6 V supply, and −40°C to +85°C operating temperature. Typical applications include load/compression sensing, touch interfaces, robotics, weight measurement, and medical equipment. #ForceSensor #MicroForce #I2C #Piezoresistive #Honeywell

LM1815N/NOPB is a National Semiconductor adaptive variable-reluctance sensor amplifier and zero-crossing detector for conditioning magnetic pickup signals in automotive ignition, speed, and position sensing applications, supplied in a 14-pin PDIP package. Keywords: LM1815N/NOPB, variable reluctance sensor interface, zero crossing detector, magnetic pickup amplifier, PDIP-14

10-Series Battery Monitor and Protector IC – Battery monitoring and protection IC for 3- to 10-series Li-ion, Li-polymer, and LiFePO4 battery packs. The Texas Instruments BQ76942PFBR provides cell-voltage, current, and temperature monitoring, autonomous or host-controlled cell balancing, high-side NFET drivers, and secondary fuse protection. It supports ±200 mV current measurement, 400 kHz I²C, SPI, and HDQ interfaces, and temperature sensing through an internal sensor plus up to 9 external thermistors. It operates with up to 85 V on the cell-connect inputs and is housed in a 48-pin TQFP package. #TexasInstruments #BQ76942 #BatteryMonitor #BatteryProtector #BMS #LiIon #LiPo #LiFePO4 #CellBalancing #BatteryManagement #I2C #SPI #EmbeddedSystems

10-Series Li-Ion/LiFePO₄ Battery Monitor and Protector – Multicell battery monitoring and protection IC designed to monitor and protect 3- to 10-series Li-ion, Li-polymer, and LiFePO₄ battery packs. The Texas Instruments BQ7694202PFBR provides cell-voltage, temperature, and current monitoring, integrated cell balancing, high-side NFET protection drivers, and overvoltage, undervoltage, overcurrent, short-circuit, and temperature protection. It supports 400-kHz I²C, SPI, and HDQ communication, includes a high-accuracy coulomb counter, supports an internal temperature sensor plus up to nine external thermistors, and operates from −40°C to +85°C in a 48-pin TQFP package. #TexasInstruments #BQ76942 #BQ7694202PFBR #BatteryMonitor #BatteryProtector #BMS #CellBalancing #LiIon #LiFePO4 #BatteryManagement #I2C #SPI #EmbeddedSystems

Figaro TGS2612-D00 Butane, Methane, Propane Gas Sensor Gas sensor designed to detect methane, propane, and iso-butane using a MOS sensing principle. It operates with a 5.0±0.2 V circuit voltage and 5.0±0.2 V AC/DC heater voltage, with a 56±5 mA heater current and 280 mW heater power consumption; typical detection range is 1–25% LEL, housed in a TO-5 metal-can package. #GasSensor #MOS #MethaneSensor #LPGSensor