Sensors

USB-A (USB TYPE-A) USB 2.0 Receptacle Connector 4 Position Through Hole, Right Angle The ADS1256IDBT is a high-precision, low-noise, 24-bit analog-to-digital converter manufactured by Texas Instruments. It is designed for high-resolution measurement applications requiring exceptional accuracy, low drift, and programmable data rates. The device integrates a low-noise programmable gain amplifier, a precision delta-sigma ADC core, and a flexible multiplexer that supports multiple differential or single-ended analog inputs. The converter is optimized for industrial process control, sensor measurement, weigh scales, data acquisition systems, temperature monitoring, and portable instrumentation. Its integrated digital filtering and selectable gain settings enable direct interfacing with low-level sensors such as strain gauges, thermocouples, RTDs, and bridge sensors without requiring extensive external signal conditioning. The ADS1256IDBT supports SPI-compatible serial communication and operates with low power consumption while maintaining excellent dynamic performance and high effective resolution. The device provides programmable output data rates suitable for both low-speed precision measurements and higher-speed acquisition systems. Device Features 24-bit delta-sigma analog-to-digital converter Low-noise programmable gain amplifier Eight single-ended or four differential analog input channels Programmable gain settings from 1 to 64 Programmable data output rates SPI-compatible serial interface Integrated digital filter for noise reduction Low offset drift and gain drift Internal oscillator support Sensor burnout detection capability Self-calibration and system calibration functions Low power operation Wide analog supply voltage range Excellent 50 Hz and 60 Hz rejection performance Electrical Characteristics Resolution of 24 bits Maximum data rate up to 30 kSPS Differential input architecture Input multiplexer for multi-channel acquisition Low RMS noise performance High common-mode rejection ratio High power-supply rejection ratio Programmable gain amplifier integrated on-chip Internal reference support with external reference capability Interface and Control SPI-compatible digital communication interface Configurable control registers Read and write register functionality Synchronization and standby control support Hardware reset capability Interrupt and data-ready signaling support Package Information Manufacturer package designation: DBT Package type: TSSOP Surface-mount device Fine-pitch lead configuration Industrial temperature grade device Applications Precision data acquisition systems Industrial automation and control Weigh scales and bridge sensors Temperature measurement systems Pressure sensing applications Portable instrumentation Medical instrumentation Laboratory measurement equipment Energy monitoring systems Process monitoring and control Manufacturer Information Manufacturer: Texas Instruments Manufacturer Part Number: ADS1256IDBT Product Category: Precision Analog-to-Digital Converter RoHS compliant device #commonpartslibrary #integratedcircuit #analog #adc #deltasigma #precisionadc #sensorinterface #dataacquisition #industrialautomation #instrumentation #signalconditioning #texasinstruments #spiinterface #mixedsignal #measurementsystems

Gas Sensors SGP30-2.5k DFN-6_L2.5-W2.5-P0.8-BL-EP LCSC Part Number: C514454 JLCPCB Part Class: Extended Part Manufactured by Sensirion(瑞士盛思锐)

The 532610271 is a Molex PicoBlade series wire-to-board connector header designed for compact electronic applications requiring reliable low-profile signal connections. It is a 2-position, single-row, surface-mount (SMT), right-angle header with a 1.25 mm pitch, commonly used in small consumer electronics, embedded systems, battery-powered devices, and compact PCB interconnects. This part belongs to the Molex PicoBlade (53261 series) family, which is optimized for high-density board-to-wire connections in space-constrained designs. Key Features Manufacturer: Molex Series: PicoBlade (53261 family) Connector Type: Wire-to-Board Header (Male Pins) Number of Positions: 2 pins (1×2 configuration) Pitch: 1.25 mm (high-density compact spacing) Mounting Type: Surface Mount (SMT), Right Angle Contact Type: Male blade terminals Current Rating: 1 A Voltage Rating: 125 V Operating Temperature: −40 °C to +105 °C Contact Material: Phosphor bronze Contact Plating: Tin (Sn) Flammability Rating: UL94 V-0 Package Style: Tape & Reel (for automated assembly) Typical Applications Compact consumer electronics Battery-powered devices IoT modules and embedded systems Sensor connections Portable medical or industrial devices Board-to-wire signal interconnects in tight PCB layouts #CommonPartsLibrary #Connector

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH Surface Mount SHT4x is a digital sensor platform for measuring relative humidity and temperature at different accuracy classes. Its I2C interface provides several preconfigured I2C addresses while maintaining an ultra-low power budget (0.4 μW). The power-trimmed internal heater can be used at three heating levels thus enabling sensor operation in demanding environments. The four-pin dual-flat-no-leads package is suitable for surface mount technology (SMT) processing and comprises an optional on-package patented PTFE membrane or a removable protective cover. Sensor specific calibration certificates according to ISO17025, identifiable through unique serial numbers, are available. • Accuracies ΔRH = ±1.0 %RH, ΔT = ±0.1 °C • VDD = 1.08 V … 3.6 V • Avg. current: 0.4 µA, Idle current: 80 nA • I2C FM+, CRC checksum, multip. I2C addr. • Patented protection options1 , PTFE membrane and removable protective cover • Operating range: 0 … 100 %RH, −40…125 °C • Fully functional in a condensing environment • Power heater, true NIST-traceability • JEDEC JESD47 qualification • Sensor-specific calibration certificate acc. to ISO 17025: 2017, 3-point temp. calibration #CommonPartsLibrary #Sensor

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R3 is a high-precision digital humidity and temperature sensor developed by Sensirion. It integrates calibrated sensing elements, analog signal processing, and a digital communication interface within a compact surface-mount package optimized for space-constrained embedded applications. The device is designed for accurate environmental monitoring across industrial, consumer, HVAC, portable electronics, and IoT systems. The sensor utilizes Sensirion CMOSens® technology to provide stable long-term performance, fast response time, and excellent repeatability under varying environmental conditions. Factory calibration enables direct digital output without the need for external calibration circuitry. The integrated I²C interface simplifies system integration with microcontrollers and embedded processors. The SHT41-AD1B-R3 is engineered for low-power operation, making it suitable for battery-powered and energy-efficient designs. Its compact DFN package supports automated assembly processes and high-density PCB layouts. The device also incorporates advanced internal diagnostics and checksum protection to improve communication reliability and data integrity. Features High-accuracy relative humidity sensing High-accuracy temperature measurement Fully calibrated and linearized digital output I²C digital communication interface Low power consumption optimized for portable systems Fast response and measurement conversion time Excellent long-term stability and repeatability Integrated heater functionality for condensation mitigation Wide operating voltage range Compact surface-mount DFN package Factory-trimmed and tested performance High immunity to environmental stress and contamination Low drift over product lifetime Suitable for reflow soldering processes Electrical Characteristics Supply voltage supports low-voltage embedded systems Digital communication compatible with standard I²C hosts Low standby current consumption Optimized active measurement current Integrated CRC data protection for communication integrity Environmental Characteristics Wide operating temperature range Wide relative humidity operating range Designed for high reliability in industrial and consumer environments Resistant to moisture-induced performance degradation Supports long operational lifetime with stable calibration Package Information Compact DFN surface-mount package Moisture-sensitive device suitable for automated assembly RoHS compliant and halogen-free construction Tape-and-reel packaging configuration for production assembly Applications Environmental monitoring systems HVAC and climate control equipment Smart home and IoT devices Portable electronics Industrial automation systems Data loggers and instrumentation Weather monitoring equipment Indoor air quality monitoring Battery-powered sensor nodes Consumer electronic products #commonpartslibrary #sensor #temperature #humidity #environmentalsensor #i2c #embedded #industrial #iot #sensirion

16 Bit Digital to Analog Converter 1 10-VSSOP The DAC80501MDGSR is a high-precision, single-channel digital-to-analog converter developed by Texas Instruments for industrial, instrumentation, and embedded control applications requiring accurate voltage output generation. The device integrates a low-drift voltage reference, precision output buffer, and serial peripheral interface communication into a compact low-power solution optimized for high-resolution signal generation. Designed for applications such as programmable power supplies, process control systems, automated test equipment, and sensor calibration, the device delivers excellent linearity, low noise performance, and stable output characteristics across varying environmental conditions. The integrated architecture minimizes external component requirements while maintaining high accuracy and long-term reliability. The converter supports rail-to-rail output operation and offers flexible reference configurations to accommodate different system architectures. Its SPI-compatible digital interface enables straightforward integration with microcontrollers, processors, and FPGA-based systems. Electrical Characteristics The device operates from a single analog supply and supports precision voltage output generation with monotonic performance across the full operating range. Integrated precision reference circuitry provides low temperature drift and stable output characteristics suitable for high-accuracy measurement and control systems. Low glitch energy, low offset error, and low gain error characteristics improve output stability during code transitions. The output amplifier is capable of driving moderate capacitive loads while maintaining signal integrity and settling performance. Interface and Control Communication is implemented through a high-speed SPI-compatible serial interface supporting standard synchronous digital communication protocols. The interface allows direct programming of DAC output codes and internal configuration registers. The device supports daisy-chain capable serial communication architecture for simplified expansion in multi-device systems. Internal registers provide control of reference operation, power management, and output configuration functions. Power Management The DAC80501MDGSR incorporates low-power operating modes intended for energy-sensitive applications. Integrated power-down functionality reduces current consumption during inactive system states while preserving configuration integrity. Internal circuitry is optimized for low quiescent current operation without compromising output precision or dynamic response performance. Package Information The device is supplied in a compact VSSOP surface-mount package suitable for space-constrained industrial and embedded designs. The package configuration supports automated assembly processes and standard PCB manufacturing techniques. Typical Applications Typical applications include industrial automation, programmable voltage sources, data acquisition systems, sensor simulation, instrumentation equipment, motor control systems, and precision calibration platforms. The device is particularly suitable for systems requiring stable and repeatable analog voltage generation with minimal external circuitry. #commonpartslibrary #integratedcircuit #analog #digital #converter

24 Bit Analog to Digital Converter 8 Input 8 Sigma-Delta 32-TQFP (5x5) The ADS131M08IPBSR is a high-precision, simultaneous-sampling analog-to-digital converter designed for multi-channel data acquisition systems requiring accurate and synchronized measurements. Manufactured by Texas Instruments, this device integrates eight differential input channels with low-noise performance, programmable gain amplification, and precision voltage reference support. The converter architecture is optimized for industrial automation, energy monitoring, medical instrumentation, and precision sensing applications where phase alignment and signal fidelity are critical. The device incorporates delta-sigma conversion technology with integrated digital filtering to provide high dynamic range and excellent noise performance across a wide operating bandwidth. It supports flexible data interface configurations through a high-speed SPI-compatible serial interface, enabling efficient communication with microcontrollers, DSPs, and FPGA-based systems. The integrated diagnostic and monitoring features improve system reliability and simplify fault detection in safety-critical applications. The ADS131M08IPBSR operates from low-voltage analog and digital supplies while maintaining low power consumption suitable for embedded and portable systems. The compact thermally enhanced package supports dense PCB layouts and reliable operation across industrial temperature environments. Engineering Specification Device Type: Simultaneous-Sampling Delta-Sigma Analog-to-Digital Converter Manufacturer: Texas Instruments Channel Configuration: Eight Differential Input Channels Resolution: Twenty-Four Bit ADC Architecture: Delta-Sigma Sampling Type: Simultaneous Sampling Input Type: Differential Analog Inputs Programmable Gain Amplifier: Integrated Data Output Interface: SPI-Compatible Serial Interface Reference Support: External Precision Voltage Reference Digital Filtering: Integrated Sinc Filter Architecture Operating Supply Voltage: Low-Voltage Analog and Digital Supplies Noise Performance: Low Noise Precision Measurement Capability Power Consumption: Optimized for Low Power Operation Diagnostics Features: Integrated Self-Monitoring and Fault Detection Temperature Range: Industrial Operating Temperature Range Package Type: TQFP Surface-Mount Package Mounting Type: Surface Mount Technology Application Areas: Energy Metering, Industrial Automation, Medical Instrumentation, Data Acquisition Systems, Multi-Channel Sensor Interfaces #commonpartslibrary #integratedcircuit #analog #digital #converter

24 Bit Analog to Digital Converter 1, 2 Input 1 Sigma-Delta 20-WQFN (3x3) The ADS127L21IRUKR is a high-resolution, low-power delta-sigma analog-to-digital converter designed for precision industrial and instrumentation applications requiring excellent AC and DC performance. The device integrates a single-channel, 24-bit ADC architecture optimized for low noise, wide dynamic range, and high accuracy signal acquisition. It supports simultaneous low-latency and high-resolution measurements, making it suitable for data acquisition systems, energy monitoring, medical instrumentation, vibration analysis, and precision sensor interfaces. The converter incorporates flexible digital filtering options, programmable operating modes, and a high-speed serial communication interface for easy integration into embedded processing systems. Engineering Specification Device Type Low-power, high-resolution delta-sigma analog-to-digital converter Resolution 24-bit Input Channels Single differential analog input channel ADC Architecture Delta-sigma modulator with integrated digital filtering Sampling Performance Supports wide programmable output data rates ranging from low-speed precision measurements to high-speed data acquisition Input Type Differential analog input Reference Input External precision reference supported Signal-to-Noise Performance High dynamic range and low-noise conversion performance suitable for precision sensing applications Digital Filters Integrated selectable digital filters with low-latency and wideband operating modes Communication Interface SPI-compatible serial digital interface Power Supply Operation Low-voltage analog and digital supply operation Power Consumption Optimized low-power operating modes for battery-powered and portable systems Clocking Supports external clock source input Calibration Features Integrated offset and gain calibration capability Temperature Range Industrial operating temperature range Package Type WQFN package Mounting Style Surface-mount device Application Areas Industrial automation, process control, precision instrumentation, medical electronics, seismic monitoring, vibration sensing, energy metering, and sensor signal acquisition systems. #commonpartslibrary #integratedcircuit #analog #digital #converter