Sensors

Power Supply Controller Digital Power Monitor 10-VSSOP The INA228 is an ultra-precise digital power monitor with a 20-bit delta-sigma ADC specifically designed for current-sensing applications. The device can measure a full-scale differential input of ±163.84 mV or ±40.96 mV across a resistive shunt sense element with common-mode voltage support from –0.3 V to +85 V. The INA228 reports current, bus voltage, temperature, power, energy and charge accumulation while employing a precision ±0.5% integrated oscillator, all while performing the needed calculations in the background. The integrated temperature sensor is ±1°C accurate for die temperature measurement and is useful in monitoring the system ambient temperature. The low offset and gain drift design of the INA228 allows the device to be used in precise systems that do not undergo multi-temperature calibration during manufacturing. Further, the very low offset voltage and noise allow for use in mA to kA sensing applications and provide a wide dynamic range without significant power dissipation losses on the sensing shunt element. The low input bias current of the device permits the use of larger currentsense resistors, thus providing accurate current measurements in the micro-amp range. The device allows for selectable ADC conversion times from 50 µs to 4.12 ms as well as sample averaging from 1x to 1024x, which further helps reduce the noise of the measured data. • High-resolution, 20-bit delta-sigma ADC • Current monitoring accuracy: – Offset voltage: ±1 µV (maximum) – Offset drift: ±0.01 µV/°C (maximum) – Gain error: ±0.05% (maximum) – Gain error drift: ±20 ppm/°C (maximum) – Common mode rejection: 154 dB (minimum) • Power monitoring accuracy: – 0.5% full scale, –40°C to +125°C (maximum) • Energy and charge accuracy: – 1.0% full scale (maximum) • Fast alert response: 75 μs • Wide common-mode range: –0.3 V to +85 V • Bus voltage sense input: 0 V to 85 V • Shunt full-scale differential range: ±163.84 mV / ±40.96 mV • Input bias current: 2.5 nA (maximum) • Temperature sensor: ±1°C (maximum at 25°C) • Programmable resistor temperature compensation • Programmable conversion time and averaging • 2.94-MHz high-speed I2C interface with 16 pinselectable addresses • Operates from a 2.7-V to 5.5-V supply: – Operational current: 640 µA (typical) – Shutdown current: 5 µA (maximum) #CommonPartsLibrary #IntegratedCircuit #PowerManagement

The ESP32-C3FH4 is a highly integrated wireless microcontroller designed for Internet of Things, smart devices, industrial automation, consumer electronics, and embedded connectivity applications. It combines a low-power RISC-V processor with integrated Wi-Fi and Bluetooth Low Energy connectivity, providing a cost-effective and secure platform for wireless communication and edge computing. The device incorporates embedded flash memory, advanced security features, low-power operating modes, and a rich set of peripheral interfaces, making it suitable for battery-powered and always-connected systems. Its compact design and comprehensive software ecosystem enable rapid development of connected products while maintaining high reliability and energy efficiency. The ESP32-C3FH4 is widely used in smart sensors, home automation devices, wearable electronics, industrial monitoring systems, wireless control modules, and cloud-connected embedded products. Features Integrated RISC-V microcontroller core Built-in Wi-Fi connectivity Integrated Bluetooth Low Energy support Embedded flash memory Low-power operation for battery-powered applications Hardware cryptographic acceleration Secure boot capability Flash encryption support Multiple GPIO interfaces Integrated UART, SPI, I²C, I²S, PWM, and ADC peripherals Real-time processing capability Wireless networking and cloud connectivity support OTA firmware update support Compact surface-mount package Industrial-grade reliability Electrical Characteristics Wireless microcontroller architecture Integrated RF subsystem Low-power operating modes High-performance embedded processing Secure communication support Multi-protocol wireless connectivity Flexible peripheral expansion capability Optimized power consumption for IoT devices Applications Internet of Things devices Smart home automation Wireless sensor networks Industrial monitoring systems Asset tracking devices Wearable electronics Smart appliances Remote control systems Data acquisition platforms Edge computing applications Connected consumer products Embedded wireless gateways Package Information Surface-mount package Compact footprint for embedded applications Suitable for automated assembly processes Optimized thermal and electrical performance PCB-friendly package design #commonpartslibrary #integratedcircuit #microcontroller #wirelessconnectivity #wifi #bluetoothlowenergy #iot #embeddedsystems #espressif #smartdevices #industrialautomation #edgecomputing #wirelessmodule #internetofthings #electronicsdesign #riscv #embeddedelectronics #lowpowerdesign

The SMBJ6.8CA is a bidirectional Transient Voltage Suppression (TVS) diode designed to protect sensitive electronic circuits from voltage transients caused by electrostatic discharge, lightning-induced surges, inductive load switching, and other transient events. It is commonly used in power supplies, communication interfaces, industrial control systems, automotive electronics, and consumer devices requiring robust overvoltage protection. The device utilizes avalanche breakdown technology to rapidly clamp transient voltages to safe levels, helping prevent damage to downstream components. Its bidirectional configuration makes it suitable for protecting AC lines and signal lines where voltage polarity may reverse. The SMB package provides a compact surface-mount solution with high surge-handling capability and excellent reliability for demanding environments. Features Bidirectional transient voltage suppression diode Fast response time to transient events High peak pulse power dissipation capability Low incremental surge resistance Excellent clamping performance Surface-mount SMB package Protection against ESD and lightning-induced surges Suitable for AC and bidirectional signal line protection RoHS-compliant and halogen-free options available from various manufacturers High reliability and long operational life Electrical Characteristics Reverse standoff voltage optimized for low-voltage applications Avalanche breakdown protection mechanism High peak surge current capability Low leakage current during normal operation Bidirectional voltage clamping characteristics Designed for transient suppression in accordance with industry surge standards Applications Power input protection Communication interfaces Industrial automation equipment Automotive electronic modules Consumer electronics Data and signal line protection Telecom equipment Embedded control systems Sensor interface protection Package Information Package Type: SMB (DO-214AA) Surface-mount technology Compact footprint for PCB integration Suitable for automated assembly processes #commonpartslibrary #semiconductor #tvsdiode #esdprotection #surgeprotection #circuitprotection #transientvoltagesuppressor #powerprotection #electronics #surfaceMountDevice #automotiveelectronics #industrialelectronics

The NX3225GD 8.000MHz STD-CRA-3 is a surface-mount quartz crystal resonator designed to provide a stable and accurate clock reference for electronic circuits. It is housed in a compact ceramic package suitable for space-constrained applications and is optimized for low power consumption and reliable frequency generation. This crystal is commonly used in microcontrollers, wireless communication modules, industrial control systems, consumer electronics, IoT devices, and embedded systems requiring precise timing and frequency control. Features Fundamental mode quartz crystal resonator Nominal frequency of 8.000 MHz Compact surface-mount ceramic package High frequency stability and accuracy Low equivalent series resistance Suitable for low-power oscillator circuits Excellent aging characteristics RoHS-compliant construction Designed for automated SMT assembly processes Reliable operation across industrial temperature environments Electrical Characteristics Crystal type: Quartz Crystal Resonator Frequency: 8.000 MHz Oscillation mode: Fundamental Load capacitance: Standard load capacitance configuration Frequency tolerance: Standard precision grade Frequency stability: Industrial-grade stability performance Equivalent series resistance optimized for MCU and RF oscillator circuits Low drive level operation High insulation resistance Mechanical Characteristics Surface-mount package Ceramic hermetic enclosure Compact footprint suitable for high-density PCB layouts Compatible with standard reflow soldering processes Designed for automated pick-and-place assembly Applications Microcontroller clock generation Wireless communication devices Bluetooth and RF modules IoT and smart devices Industrial automation equipment Embedded control systems Consumer electronics Timing and synchronization circuits Sensor interface modules Portable battery-powered products Compliance RoHS compliant Lead-free package Environmentally friendly manufacturing standards Suitable for commercial and industrial electronic applications #commonpartslibrary #crystal #quartzcrystal #frequencycontrol #timingdevice #clocksource #oscillator #smtcomponent #embeddedsystems #wirelesscommunication #industrialelectronics #consumerelectronics #iotdevices #passivecomponents #electroniccomponents

The LSM6DSOXTR is a low-power inertial measurement unit integrating a three-axis accelerometer and a three-axis gyroscope within a compact surface-mount package. Designed for motion tracking, gesture recognition, activity monitoring, and sensor fusion applications, the device incorporates embedded machine learning capabilities and programmable finite state machines to enable intelligent edge processing with reduced host processor workload. The sensor supports high-performance motion sensing while maintaining low power consumption, making it suitable for wearable devices, IoT products, industrial monitoring systems, smart home equipment, and portable electronics. Engineering Specification Device Type Six-axis inertial measurement unit featuring a three-axis accelerometer and three-axis gyroscope. Sensor Functions Motion sensing, orientation detection, vibration monitoring, gesture recognition, activity tracking, tilt sensing, and sensor fusion. Integrated Features Embedded machine learning core, finite state machine engine, sensor hub functionality, timestamp generation, event detection, and programmable interrupt generation. Communication Interface Supports digital communication through I²C, SPI, and I³C interfaces for integration with microcontrollers and embedded processors. Power Characteristics Optimized for low-power operation with multiple performance modes supporting battery-powered and always-on applications. Measurement Capabilities Provides configurable acceleration and angular rate measurement ranges with programmable output data rates and digital filtering options. Embedded Intelligence Includes on-chip machine learning and event classification capabilities to enable local data processing and reduce system power consumption. Package Style Compact surface-mount LGA package suitable for space-constrained electronic designs. Applications Wearable electronics, asset tracking devices, industrial sensors, robotics, smart appliances, navigation systems, handheld devices, health monitoring equipment, and IoT products. Manufacturer STMicroelectronics. Hashtags #LSM6DSOXTR #STMicroelectronics #IMU #MotionSensor #Accelerometer #Gyroscope #SensorFusion #MachineLearningCore #EmbeddedSystems #WearableElectronics #IndustrialAutomation #IoT #SmartDevices #MEMS #CommonPartsLibrary

The CC1101RGP is a low-power sub-gigahertz RF transceiver designed for wireless communication applications requiring reliable long-range data transmission and high receiver sensitivity. It integrates a complete radio frequency front-end, packet handling engine, modulation and demodulation circuitry, frequency synthesizer, and advanced power management features within a compact package. The device supports multiple modulation formats and is optimized for industrial, scientific, medical, smart metering, home automation, remote control, wireless sensor networks, and Internet of Things applications. Its flexible configuration options enable designers to achieve an optimal balance between communication range, data throughput, power consumption, and system robustness. Features Sub-gigahertz RF transceiver for license-free ISM frequency bands High receiver sensitivity for extended communication range Programmable output power for optimized power consumption Multiple modulation schemes including FSK, GFSK, ASK, OOK, and MSK Integrated packet handling and error detection functions Fast frequency synthesizer settling time Low current consumption in transmit, receive, and sleep modes Hardware support for address filtering and data buffering Programmable channel spacing and data rate configuration Integrated RSSI, LQI, and clear channel assessment functions SPI interface for configuration and data communication Suitable for battery-powered wireless devices Applications Smart metering systems Wireless sensor networks Industrial monitoring and control Home and building automation Remote keyless entry systems Alarm and security systems Asset tracking devices Telemetry and data acquisition systems IoT communication nodes Proprietary wireless communication networks Electrical Characteristics Wide operating supply voltage range Low-power transmit and receive operation Programmable RF output power levels High-performance frequency synthesizer Low standby and sleep current consumption Integrated crystal oscillator support Robust RF performance across supported frequency bands Interface and Connectivity Serial Peripheral Interface communication Digital control and status signals Configurable interrupt outputs Integrated FIFO buffers for transmit and receive data External antenna connection through matching network Package Information Surface-mount package suitable for automated assembly Compact footprint for space-constrained applications RoHS-compliant device construction #commonpartslibrary #integratedcircuit #wirelesscommunication #rftransceiver #subghz #iot #embeddedsystems #industrialautomation #smartmetering #wirelesssensornetwork #lowpowerdesign #telemetry #homeautomation #remotecontrol #texasinstruments