Microcontrollers

The AMS1117-3.3RG is a fixed-output, low-dropout (LDO) linear voltage regulator that provides a regulated 3.3 V output from a higher input voltage. It is capable of delivering up to 1 A output current and is commonly used in microcontroller, communication, and embedded-system power supplies where a stable 3.3 V rail is required. The device includes built-in protection features such as current limiting and thermal shutdown for improved reliability. Key Features Fixed 3.3 V output voltage Supports up to 1 A output current Low dropout voltage, typically around 1.2 V and up to 1.3 V at 1 A load Input voltage capability up to 12 V (some manufacturer variants specify higher absolute maximum ratings) Good line and load regulation Built-in current limiting protection Built-in thermal shutdown protection Available in SOT-223 surface-mount package Suitable for post-regulation of switching power supplies and general 3.3 V power conversion applications Typical Applications ESP32, STM32, and other microcontroller-based systems Embedded and IoT devices Communication modules LCD monitors and display circuits Battery-powered equipment Post-regulation for DC/DC converters Motherboards and expansion cards #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LDO

Pin Header 2 2.54mm 6mm 16P -55℃~+105℃ 3mm 2.54mm 3A 2.54mm 2x8P Through Hole,P=2.54mm Headers, Male Pins RoHS The 2.54-2×8P pin header is a dual-row connector with 16 pins arranged in a 2×8 configuration and a standard 2.54 mm (0.1 inch) pitch. It is commonly used in PCB interconnections, development boards, modules, and general-purpose electronic circuits for signal routing and board-to-board or wire-to-board connections. Key Features Standard pitch: 2.54 mm (0.1 inch), widely compatible with breadboards and jumper wires Pin configuration: 2 rows × 8 pins (total 16 pins) Mounting type: Typically through-hole for strong mechanical stability Easy connectivity: Supports jumper wires, female sockets, and IDC connectors Versatile use: Common in development boards, microcontroller systems, and expansion interfaces Cost-effective: Simple and widely available connector solution Durable contact: Designed for repeated plugging and unplugging in prototyping environments #CommonPartsLibrary #Connector

CONN HEADER 8POS 2.54mm DUAL ROW SMD The 2.54-2×4P is a generic 8-pin dual-row connector/header with a 2.54 mm (0.1 inch) pitch, commonly used for board-to-board, wire-to-board, and programming/debug interfaces in electronic circuits. The designation 2×4P indicates two rows of four pins, providing a total of eight electrical connections in a compact arrangement. This type of connector is widely used in embedded systems, development boards, industrial control equipment, consumer electronics, and prototyping applications due to its standard pitch and broad compatibility with jumper wires, IDC cables, and mating sockets. Key Features 2.54 mm standard pitch (0.1 inch industry standard) 2×4 pin configuration (8 total contacts) Available in through-hole (THT) and sometimes surface-mount (SMT) versions Supports board-to-board and wire-to-board connections Compatible with standard jumper wires and ribbon cable connectors Compact dual-row design for higher pin density Typically constructed with gold-plated or tin-plated contacts for reliable electrical performance Suitable for signal, control, and low-power applications Commonly used for programming, debugging, communication interfaces, and expansion headers Available in straight (vertical) or right-angle orientations depending on manufacturer Typical Applications Microcontroller and development boards ISP/JTAG/SWD programming headers Sensor and peripheral connections Industrial control systems Prototyping and breadboard-compatible designs Communication interfaces and expansion ports #CommonPartsLibrary #Connector

Female Header 38 Position 2.54mm Pitch Dual Row Through Hole -40℃~+105℃ X6521FV-2x19-C85D32 is a 2.54 mm pitch, dual-row female header connector manufactured by XKB Connection. It is designed for through-hole PCB mounting and provides a reliable board-to-board or wire-to-board interconnection solution in industrial, consumer, and embedded electronic applications. The connector features 38 positions (2×19) arranged in two rows and supports moderate power and signal transmission requirements. Key Features Connector Type: Female Header / Receptacle Number of Positions: 38 contacts (2×19 configuration) Pitch: 2.54 mm (0.1 inch) Row Spacing: 2.54 mm Mounting Type: Through-Hole (THT) Orientation: Top-entry Rated Current: 3 A per contact Rated Voltage: 250 V Contact Material: Brass Contact Plating: Gold-plated contacts for improved conductivity and corrosion resistance Insulator Height: 8.5 mm Operating Temperature Range: -40°C to +105°C Hole Type: Square socket contacts RoHS Compliant Typical Applications Microcontroller and development boards Industrial control systems Embedded electronics Board-to-board interconnections Prototyping and evaluation hardware Signal and low-power distribution connections #CommonPartsLibrary #Connector

800 mA, 25 μA, high PSRR voltage regulator The XC6210B332MR is a low-dropout (LDO) positive voltage regulator designed to provide a stable 3.3 V output from a higher input voltage. It is manufactured using CMOS technology and is optimized for low power consumption, high ripple rejection, and fast transient response. The device is commonly used in battery-powered equipment, portable electronics, wireless communication devices, microcontroller systems, and other applications requiring a compact and efficient power supply. It is available in a small SOT-23-5 (SOT-25) package. Key Features Fixed 3.3 V output voltage Input voltage range: 1.5 V to 6.0 V Maximum output current: up to 700 mA (800 mA current limit typical) Very low dropout voltage: 50 mV typ. at 100 mA load 100 mV typ. at 200 mA load Low quiescent current for improved battery life High power-supply ripple rejection (PSRR) Built-in current limiting protection Built-in thermal shutdown protection Enable/Chip Enable (CE) control for power-saving operation Stable with low-ESR ceramic capacitors Operating temperature range: −40°C to +85°C Compact SOT-23-5 (SOT-25) package suitable for space-constrained designs. #CommonPartsLibrary #IntegratedCircuit #PowerManagement

The TPAP2112K-3.3TRG1 is a low-dropout linear voltage regulator designed to provide a stable regulated output voltage for low-power electronic systems. This device is optimized for applications requiring low noise, low quiescent current, and compact PCB implementation in portable and embedded electronics. The regulator delivers reliable voltage regulation with minimal external component requirements, making it suitable for battery-powered devices, microcontroller systems, wireless modules, sensor interfaces, and general-purpose analog and digital power rails. Its low-dropout architecture enables efficient operation even when the input voltage is close to the regulated output voltage, helping extend battery life in portable applications. The TPAP2112K-3.3TRG1 integrates internal protection features such as current limiting and thermal shutdown to improve system reliability and protect downstream circuitry from abnormal operating conditions. Its compact surface-mount package supports high-density PCB layouts and automated manufacturing processes. Engineering Specification Device Type Low-dropout linear voltage regulator Regulator Topology Positive fixed-output LDO regulator Output Voltage Fixed regulated voltage output Input Characteristics Designed for low-voltage DC input operation Dropout Characteristics Low-dropout voltage architecture for efficient regulation Output Performance Stable low-noise voltage regulation Quiescent Current Low standby current suitable for portable systems Protection Features Current limiting Thermal shutdown Short-circuit protection Thermal Characteristics Efficient thermal operation for compact embedded systems Stability Characteristics Stable operation with standard external capacitors Package Type Surface-mount package Mounting Style Surface mount technology Applications Embedded systems Battery-powered devices Wireless modules Sensor power rails Microcontroller systems Portable electronics IoT hardware Consumer electronics Industrial control systems Analog signal conditioning Manufacturer Commonly associated with 3PEAK or compatible power management vendors #commonpartslibrary #ldoregulator #voltageregulator #powermanagement #powersupply #embeddedhardware #powerelectronics #surfaceountcomponents #electronicsdesign #portableelectronics #iothardware #analogdesign #batterypowered #industrialelectronics #lowpowerelectronics

USB-to-UART Bridge CP2102N CP2102N-A02-GQFN28R is a highly integrated USB-to-UART bridge controller from Silicon Labs that provides a simple and reliable interface between a USB host and an embedded system using a UART serial port. It eliminates the need for complex USB firmware development by handling all USB protocol functions internally and presenting a standard UART interface to the target device. The device is commonly used in microcontroller programming, debugging, industrial equipment, IoT devices, and USB-to-serial adapters. logging equipment Consumer and portable electronics Function: USB-to-UART Bridge Controller

The NX3225SA-26MHz-STD-CSR-6 is a surface-mount quartz crystal resonator designed to provide a stable frequency reference for microcontrollers, wireless communication modules, embedded systems, consumer electronics, industrial controls, and timing applications. Manufactured in a compact ceramic package, this crystal offers excellent frequency stability, low power consumption, and reliable long-term performance. Its standard frequency tolerance and stability characteristics make it suitable for clock generation, frequency synthesis, and synchronization functions in a wide range of electronic designs requiring precise timing accuracy. Features Surface-mount quartz crystal resonator Fundamental mode operation Compact ceramic package suitable for high-density PCB layouts Stable frequency reference for digital and RF applications Low equivalent series resistance for reliable oscillator startup Compatible with automated assembly processes Excellent aging characteristics and long-term reliability Suitable for low-power and battery-operated devices RoHS-compliant and lead-free construction Applications Microcontroller clock generation Wireless communication modules Bluetooth and Wi-Fi devices Industrial automation equipment IoT and smart devices Consumer electronics Measurement and instrumentation systems Embedded control platforms Timing and synchronization circuits Electrical Characteristics Nominal frequency centered at twenty-six megahertz Standard frequency tolerance classification Standard operating temperature stability Fundamental crystal oscillation mode Specified load capacitance configuration Low equivalent series resistance High insulation resistance Low drive level operation Reliable startup characteristics Long operational lifetime with minimal frequency drift Mechanical Characteristics Ceramic surface-mount package Compact footprint suitable for space-constrained designs Metal lid sealed construction Designed for reflow soldering processes Tape-and-reel packaging compatibility Environmental Characteristics Industrial-grade reliability Resistance to mechanical shock and vibration within specification limits Moisture-resistant sealed package construction Suitable for standard electronic manufacturing environments Compliant with environmental and hazardous substance regulations #commonpartslibrary #crystal #quartzcrystal #frequencyreference #timingdevice #oscillator #clocksource #smtcomponent #passivecomponent #embeddedsystems #wirelesscommunication #industrialelectronics #consumerelectronics #iotdevices #electronicsdesign

The ESP32-C3FH4 is a highly integrated wireless microcontroller designed for Internet of Things, smart devices, industrial automation, consumer electronics, and embedded connectivity applications. It combines a low-power RISC-V processor with integrated Wi-Fi and Bluetooth Low Energy connectivity, providing a cost-effective and secure platform for wireless communication and edge computing. The device incorporates embedded flash memory, advanced security features, low-power operating modes, and a rich set of peripheral interfaces, making it suitable for battery-powered and always-connected systems. Its compact design and comprehensive software ecosystem enable rapid development of connected products while maintaining high reliability and energy efficiency. The ESP32-C3FH4 is widely used in smart sensors, home automation devices, wearable electronics, industrial monitoring systems, wireless control modules, and cloud-connected embedded products. Features Integrated RISC-V microcontroller core Built-in Wi-Fi connectivity Integrated Bluetooth Low Energy support Embedded flash memory Low-power operation for battery-powered applications Hardware cryptographic acceleration Secure boot capability Flash encryption support Multiple GPIO interfaces Integrated UART, SPI, I²C, I²S, PWM, and ADC peripherals Real-time processing capability Wireless networking and cloud connectivity support OTA firmware update support Compact surface-mount package Industrial-grade reliability Electrical Characteristics Wireless microcontroller architecture Integrated RF subsystem Low-power operating modes High-performance embedded processing Secure communication support Multi-protocol wireless connectivity Flexible peripheral expansion capability Optimized power consumption for IoT devices Applications Internet of Things devices Smart home automation Wireless sensor networks Industrial monitoring systems Asset tracking devices Wearable electronics Smart appliances Remote control systems Data acquisition platforms Edge computing applications Connected consumer products Embedded wireless gateways Package Information Surface-mount package Compact footprint for embedded applications Suitable for automated assembly processes Optimized thermal and electrical performance PCB-friendly package design #commonpartslibrary #integratedcircuit #microcontroller #wirelessconnectivity #wifi #bluetoothlowenergy #iot #embeddedsystems #espressif #smartdevices #industrialautomation #edgecomputing #wirelessmodule #internetofthings #electronicsdesign #riscv #embeddedelectronics #lowpowerdesign

ESD DIODE 15VC SOT-23-6 The UMW USBLC6-2SC6 is a low-capacitance TVS/ESD protection diode array designed to protect high-speed data interfaces such as USB 2.0 and Ethernet from electrostatic discharge (ESD), electrical fast transients (EFT), and surge events. It integrates dual protection channels in a compact SOT-23-6 package, making it suitable for space-constrained portable and embedded designs. Key Features Dual-line ESD protection for high-speed signal interfaces Supports USB 2.0, 10/100 Ethernet, and other sensitive data lines Very low capacitance (~0.8 pF typical) to preserve signal integrity Operating voltage: 5 V Low clamping voltage for improved downstream IC protection IEC 61000-4-2 ESD protection: ±30 kV air discharge ±30 kV contact discharge IEC 61000-4-4 EFT protection up to 40 A (5/50 ns) IEC 61000-4-5 surge protection up to 6 A (8/20 µs) Peak pulse power capability: 150 W Ultra-low leakage current in the nA range Fast response time (<1 ns typical) Compact SOT-23-6 surface-mount package RoHS, Pb-free, and halogen-free compliant Typical Applications USB data line protection Ethernet interfaces Portable electronics Notebook and desktop PCs Digital cameras Embedded systems and microcontroller USB ports #CommonPartsLibrary #TVS-Diode