Interface ICs

19-position HDMI Type-C female receptacle with a right-angle surface-mount configuration for compact HDMI signal connections. Suitable for consumer electronics, embedded systems, displays, and other PCB-mounted HDMI interfaces. Features 19 contacts with approximately 0.40 mm contact spacing and gold-over-nickel contact plating. Electrical voltage and current ratings are not specified in the available manufacturer/distributor data and should be verified from the latest datasheet before design use. #HDMI #HDMITypeC #HDMIConnector #Connector #Receptacle #SMD #RightAngle #19Pin #HanboElectronic

The ESP32-C3FH4 is a highly integrated wireless microcontroller designed for Internet of Things, smart devices, industrial automation, consumer electronics, and embedded connectivity applications. It combines a low-power RISC-V processor with integrated Wi-Fi and Bluetooth Low Energy connectivity, providing a cost-effective and secure platform for wireless communication and edge computing. The device incorporates embedded flash memory, advanced security features, low-power operating modes, and a rich set of peripheral interfaces, making it suitable for battery-powered and always-connected systems. Its compact design and comprehensive software ecosystem enable rapid development of connected products while maintaining high reliability and energy efficiency. The ESP32-C3FH4 is widely used in smart sensors, home automation devices, wearable electronics, industrial monitoring systems, wireless control modules, and cloud-connected embedded products. Features Integrated RISC-V microcontroller core Built-in Wi-Fi connectivity Integrated Bluetooth Low Energy support Embedded flash memory Low-power operation for battery-powered applications Hardware cryptographic acceleration Secure boot capability Flash encryption support Multiple GPIO interfaces Integrated UART, SPI, I²C, I²S, PWM, and ADC peripherals Real-time processing capability Wireless networking and cloud connectivity support OTA firmware update support Compact surface-mount package Industrial-grade reliability Electrical Characteristics Wireless microcontroller architecture Integrated RF subsystem Low-power operating modes High-performance embedded processing Secure communication support Multi-protocol wireless connectivity Flexible peripheral expansion capability Optimized power consumption for IoT devices Applications Internet of Things devices Smart home automation Wireless sensor networks Industrial monitoring systems Asset tracking devices Wearable electronics Smart appliances Remote control systems Data acquisition platforms Edge computing applications Connected consumer products Embedded wireless gateways Package Information Surface-mount package Compact footprint for embedded applications Suitable for automated assembly processes Optimized thermal and electrical performance PCB-friendly package design #commonpartslibrary #integratedcircuit #microcontroller #wirelessconnectivity #wifi #bluetoothlowenergy #iot #embeddedsystems #espressif #smartdevices #industrialautomation #edgecomputing #wirelessmodule #internetofthings #electronicsdesign #riscv #embeddedelectronics #lowpowerdesign

The 15ETYRM-3.5-02P-14-00AH is a pluggable terminal block connector designed for secure wire-to-board interconnection in industrial and embedded electronic systems. This connector is intended for reliable field wiring applications where compact size, robust mechanical retention, and simplified installation are required. The connector utilizes a screw-clamp or tension-clamp termination structure to provide stable electrical connectivity for power and signal transmission in control systems, industrial automation equipment, instrumentation, communication devices, and power distribution modules. Its pluggable architecture enables convenient maintenance, modular system assembly, and rapid field replacement without direct PCB soldering operations. The device is optimized for through-hole PCB mounting and supports durable operation in electrically demanding industrial environments. The compact pitch spacing and reinforced housing design make it suitable for high-density electronic assemblies requiring dependable terminal connections and long-term operational stability. Engineering Specification Device Type Pluggable terminal block connector Connector Configuration Wire-to-board pluggable terminal interface Number of Positions Dual-position terminal connection Pitch Spacing Compact industrial terminal pitch configuration Termination Method Screw-clamp or spring-tension wire termination Mounting Style Through-hole PCB mounting Connection Characteristics Secure removable field wiring interface Mechanical Features High-retention plug and socket mating structure Electrical Characteristics Suitable for low-voltage power and signal transmission Housing Material Flame-retardant insulated connector body Reliability Features Vibration-resistant electrical connection stability Assembly Compatibility Industrial and automated PCB assembly support Applications Industrial automation Control systems Power distribution modules Embedded hardware Communication equipment Instrumentation systems Signal interface boards Factory automation Power supply connections Field wiring systems Manufacturer Commonly associated with DEGSON or compatible terminal block manufacturers #commonpartslibrary #terminalblock #pluggableconnector #wiretoboard #industrialconnectors #embeddedhardware #electronicsdesign #throughholecomponents #industrialautomation #powerelectronics #signalinterfaces #pcbconnectors #fieldwiring #controlsystems #electromechanical

USBPD and Multiple Fast Charging Protocol Receiving Chip CH224 CH224K is a USB Power Delivery protocol controller integrated circuit designed for fast-charging and programmable USB Type-C power negotiation applications. The device enables intelligent voltage trigger and power profile selection from compatible USB Type-C and USB PD power sources, making it suitable for embedded power systems, portable electronics, development boards, and battery-powered devices. This controller supports automatic communication with USB Type-C power adapters to negotiate higher voltage and current profiles for efficient power delivery. It simplifies USB PD implementation by integrating protocol handling, voltage selection logic, and interface control into a compact low-power solution with minimal external component requirements. The CH224K is widely used in DIY electronics, portable charging systems, embedded controllers, IoT hardware, industrial devices, and USB Type-C powered applications requiring stable and configurable DC power input. Its compact surface-mount package and simplified design architecture enable rapid integration into space-constrained PCB layouts. #commonpartslibrary #usbtypec #usbpd #powerdelivery #powermanagement #embeddedhardware #fastcharging #electronicscomponents #portableelectronics #surfacemountdevice

ESD DIODE 15VC SOT-23-6 The UMW USBLC6-2SC6 is a low-capacitance TVS/ESD protection diode array designed to protect high-speed data interfaces such as USB 2.0 and Ethernet from electrostatic discharge (ESD), electrical fast transients (EFT), and surge events. It integrates dual protection channels in a compact SOT-23-6 package, making it suitable for space-constrained portable and embedded designs. Key Features Dual-line ESD protection for high-speed signal interfaces Supports USB 2.0, 10/100 Ethernet, and other sensitive data lines Very low capacitance (~0.8 pF typical) to preserve signal integrity Operating voltage: 5 V Low clamping voltage for improved downstream IC protection IEC 61000-4-2 ESD protection: ±30 kV air discharge ±30 kV contact discharge IEC 61000-4-4 EFT protection up to 40 A (5/50 ns) IEC 61000-4-5 surge protection up to 6 A (8/20 µs) Peak pulse power capability: 150 W Ultra-low leakage current in the nA range Fast response time (<1 ns typical) Compact SOT-23-6 surface-mount package RoHS, Pb-free, and halogen-free compliant Typical Applications USB data line protection Ethernet interfaces Portable electronics Notebook and desktop PCs Digital cameras Embedded systems and microcontroller USB ports #CommonPartsLibrary #TVS-Diode

Small Footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support LAN8720A-CP-TR-ABC is a low-power, single-port 10BASE-T/100BASE-TX Ethernet Physical Layer (PHY) transceiver from Microchip Technology. It is designed to connect a microcontroller, processor, or Ethernet MAC to a standard Ethernet network through an RMII (Reduced Media Independent Interface). The device is widely used in embedded networking applications such as industrial controllers, IoT gateways, IP cameras, networked printers, routers, and ESP32-based Ethernet designs. Key Features Single-chip 10/100 Mbps Ethernet PHY Supports both 10BASE-T and 100BASE-TX Ethernet operation. RMII Interface Reduced pin-count interface for easy connection to Ethernet MACs and microcontrollers. IEEE 802.3 / 802.3u Compliant Fully compliant with Fast Ethernet standards. HP Auto-MDIX Support Automatically detects and configures straight-through or crossover Ethernet cables. Auto-Negotiation Automatically selects the best available speed and duplex mode. Flexible I/O Voltage Supports LVCMOS I/O voltages from 1.6 V to 3.6 V, simplifying interfacing with different processors. Integrated 1.2 V Regulator Allows operation from a single 3.3 V supply, reducing external components. Low-Power Architecture Features multiple power-saving modes through Microchip's flexPWR® technology. Built-in Diagnostics and Reliability Features Loopback modes, automatic polarity correction, link-status monitoring, and wake-up detection. Compact Package Available in a 24-pin SQFN/QFN (4 mm × 4 mm) package for space-constrained designs #CommonPartsLibrary #IntegratedCircuit

HYCW262-USBC16-175B is a 16-position USB Type-C female receptacle for USB 3.1 interfaces, featuring recessed/board-mount SMD construction. It is rated for 3 A current, operates from −30°C to +85°C, and supports up to 10,000 mating cycles. Suitable for USB-C power and data interfaces in compact embedded and consumer electronics. #USBTypeC #USBConnector #USB31 #Receptacle #SMD #HOAUC

918-318K2023F40003 is a 24-position USB Type-C receptacle connector designed for surface-mount PCB assembly. It provides a reversible USB-C interface for power and data connectivity in consumer electronics, embedded systems, and portable devices. Rated for 5 V and 3 A, with an operating temperature range of −25°C to +85°C. #USBTypeC #USBConnector #Receptacle #24Position #SurfaceMount #SMT #JingExtension

The 24T 10A250V is an electromechanical switch component commonly used for AC power control, appliance switching, industrial equipment interfaces, and general-purpose electrical control applications. This device is designed to handle moderate current and voltage loads while providing reliable manual switching performance in consumer and industrial electronic systems. The switch is typically implemented as a rocker, toggle, or push-type power switch depending on the manufacturer-specific configuration. It is engineered to provide stable electrical contact operation, mechanical durability, and long operational service life under repeated switching cycles. The component is commonly used in AC mains-powered equipment, power distribution systems, control panels, laboratory instruments, and embedded electronic hardware requiring user-accessible power control. Its robust contact structure and insulated housing design support safe operation in electrically demanding environments while simplifying panel integration and wiring assembly processes. Engineering Specification Device Type Electromechanical power switch Switching Function Manual AC power switching control Electrical Rating Suitable for moderate AC voltage and current operation Contact Characteristics High-reliability conductive switching contacts Mounting Style Panel mount or PCB mount depending on manufacturer configuration Mechanical Operation Manual actuator-based switching mechanism Housing Material Flame-retardant insulated enclosure structure Contact Material Durable conductive alloy contact system Reliability Features Long mechanical and electrical operational lifespan Safety Characteristics Designed for safe AC mains switching applications Environmental Characteristics Suitable for consumer and industrial operating environments Applications AC power control Industrial equipment Consumer appliances Embedded electronics Power distribution systems Laboratory instrumentation Control panels Electrical equipment Power switching interfaces General-purpose electronic systems Manufacturer Commonly associated with generic industrial switch manufacturers #commonpartslibrary #powerswitch #electromechanical #acswitch #powerelectronics #industrialelectronics #controlsystems #embeddedhardware #electronicsdesign #powermanagement #panelmount #electricalswitch #consumerelectronics #powersystems #electromechanicalcomponents

3D accelerometer and 3D gyroscope The LSM6DS3TR-C is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope performing at 0.90 mA in high-performance mode and enabling always-on low-power features for an optimal motion experience for the consumer. The LSM6DS3TR-C supports main OS requirements, offering real, virtual and batch sensors with 4 kbyte for dynamic data batching. ST’s family of MEMS sensor modules leverages the robust and mature manufacturing processes already used for the production of micromachined accelerometers and gyroscopes. The various sensing elements are manufactured using specialized micromachining processes, while the IC interfaces are developed using CMOS technology that allows the design of a dedicated circuit which is trimmed to better match the characteristics of the sensing element. The LSM6DS3TR-C has a full-scale acceleration range of ±2/±4/±8/±16 g and an angular rate range of ±125/±250/±500/±1000/±2000 dps. High robustness to mechanical shock makes the LSM6DS3TR-C the preferred choice of system designers for the creation and manufacturing of reliable products. The LSM6DS3TR-C is available in a plastic land grid array (LGA) package. Features  “Always-on” experience with low power consumption for both accelerometer and gyroscope  Power consumption: 0.90 mA in combo highperformance mode  Smart FIFO up to 4 kbyte based on features set  Android M compliant  Hard, soft ironing for external magnetic sensor corrections  ±2/±4/±8/±16 g full scale  ±125/±250/±500/±1000/±2000 dps full scale  Analog supply voltage: 1.71 V to 3.6 V  Independent IO supply (1.62 V)  Compact footprint, 2.5 mm x 3 mm x 0.83 mm  SPI & I2C serial interface with main processor data synchronization feature  Pedometer, step detector and step counter  Significant motion and tilt function  Standard interrupts: free-fall, wakeup, 6D/4D orientation, click and double-click  Embedded temperature sensor  ECOPACK®, RoHS and “Green” compliant #CommonPartsLibrary #Sensor