Diodes

ESD DIODE 5VWM 14VC SOT-666-6 The USBLC6-2P6 is a dual-line, rail-to-rail transient voltage suppressor (TVS) diode array in a compact SOT-666 package. It is specifically optimized for protecting USB D+ and D− lines (and similar high-speed differential pairs) while maintaining very low signal distortion due to its low capacitance design. It clamps high-voltage ESD events to safe levels, protecting sensitive ICs such as MCUs, USB PHYs, and transceivers. Designed for USB and high-speed data protection Ideal for USB 2.0 (480 Mbps) interfaces Very low line capacitance Minimizes signal distortion on high-speed differential pairs Bidirectional ESD protection Protects both positive and negative voltage transients Low clamping voltage Typical clamp around ~17 V during surge events High peak pulse current capability Handles ESD strikes (IEC 61000-4-2 compliant, typically ±15 kV air / ±8 kV contact in similar ST USBLC family devices) Rail-to-rail protection structure Protects signal lines relative to VCC and GND Compact SOT-666 package Suitable for very small PCB layouts (phones, USB ports, embedded systems) 2-channel configuration Typically used for D+ / D− pair protection Typical Applications USB 2.0 ports (D+ / D− protection) Smartphones and tablets Embedded systems with external connectors HDMI / Ethernet signal protection (low-capacitance variants also used) Any exposed high-speed data interface requiring ESD protection #CommonPartsLibrary #Diode

The SMBJ6.8CA is a bidirectional Transient Voltage Suppression (TVS) diode designed to protect sensitive electronic circuits from voltage transients caused by electrostatic discharge, lightning-induced surges, inductive load switching, and other transient events. It is commonly used in power supplies, communication interfaces, industrial control systems, automotive electronics, and consumer devices requiring robust overvoltage protection. The device utilizes avalanche breakdown technology to rapidly clamp transient voltages to safe levels, helping prevent damage to downstream components. Its bidirectional configuration makes it suitable for protecting AC lines and signal lines where voltage polarity may reverse. The SMB package provides a compact surface-mount solution with high surge-handling capability and excellent reliability for demanding environments. Features Bidirectional transient voltage suppression diode Fast response time to transient events High peak pulse power dissipation capability Low incremental surge resistance Excellent clamping performance Surface-mount SMB package Protection against ESD and lightning-induced surges Suitable for AC and bidirectional signal line protection RoHS-compliant and halogen-free options available from various manufacturers High reliability and long operational life Electrical Characteristics Reverse standoff voltage optimized for low-voltage applications Avalanche breakdown protection mechanism High peak surge current capability Low leakage current during normal operation Bidirectional voltage clamping characteristics Designed for transient suppression in accordance with industry surge standards Applications Power input protection Communication interfaces Industrial automation equipment Automotive electronic modules Consumer electronics Data and signal line protection Telecom equipment Embedded control systems Sensor interface protection Package Information Package Type: SMB (DO-214AA) Surface-mount technology Compact footprint for PCB integration Suitable for automated assembly processes #commonpartslibrary #semiconductor #tvsdiode #esdprotection #surgeprotection #circuitprotection #transientvoltagesuppressor #powerprotection #electronics #surfaceMountDevice #automotiveelectronics #industrialelectronics

SMAJ5.0A-Q is an automotive-grade, unidirectional Transient Voltage Suppressor (TVS) diode from Bourns. It is designed to protect sensitive electronic circuits from Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), lightning-induced surges, and other transient overvoltage events. The device is commonly used on 5 V power rails and communication interfaces in automotive, industrial, and telecom applications. Key Features Unidirectional TVS diode for DC line protection. 5 V reverse standoff voltage (VRWM) suitable for 5 V systems. 6.4 V minimum breakdown voltage (VBR). 9.2 V maximum clamping voltage (VC) at peak pulse current. 400 W peak pulse power dissipation (10/1000 μs waveform). 43.5 A peak pulse current (IPP) capability. AEC-Q101 qualified for automotive applications. Fast response time (<1 ps typical) for effective transient suppression. Wide operating temperature range: -55°C to +150°C. Surface-mount DO-214AC (SMA) package for compact PCB designs. RoHS compliant and suitable for automated assembly processes. Typical Applications Automotive ECUs and power rails 5 V power supplies Telecom equipment Industrial control systems I/O ports and communication interfaces Consumer electronics requiring surge protection #CommonPartsLibrary #Diode

8A@8/20us 54V 26.7V 24V SOT-23 ESD and Surge Protection ESD DIODE 24VWM 41VC SOT-23 PESD2CAN is a dual-line ESD protection diode designed to protect automotive Controller Area Network (CAN) bus interfaces from Electrostatic Discharge (ESD), surge events, and other transient voltage disturbances. It is housed in a compact SOT-23 package and provides protection for both CANH and CANL lines using a single device. Key Features Dual CAN bus line protection in a single SOT-23 package Maximum peak pulse power: 230 W (8/20 μs surge waveform) Low clamping voltage: 41 V at 5 A surge current Ultra-low leakage current: < 1 nA ESD protection up to 30 kV Compliant with IEC 61000-4-2 Level 4 ESD standard Compliant with IEC 61000-4-5 surge immunity standard AEC-Q101 qualified for automotive applications Reverse standoff voltage: 24 V Low capacitance (typically 25 pF) to minimize impact on CAN signal integrity Suitable for both high-speed and fault-tolerant CAN networks Typical Applications Automotive CAN bus networks Industrial CAN communication systems Automotive electronic control units (ECUs) CAN transceivers requiring ESD and surge protection Any differential communication interface exposed to external connectors Package SOT-23 (3-pin) Surface-Mount Device (SMD) package. #CommonPartsLibrary #Diode

Infrared remote receiver TSOP36238TT SENSOR-SMD_TSOP36238TR LCSC Part Number: C3151601 JLCPCB Part Class: Extended Part Vishay IR receiver module for remote control systems, integrated PIN photodiode, preamplifier, AGC circuit, band-pass filter and demodulator in one epoxy package, 2.0V to 5.5V supply voltage, low supply current, digital output for direct MCU connection, high immunity to ambient noise from lamps, LCD TV and Wi-Fi, optimized for long-burst IR remote control applications. Search Keywords: Vishay IR receiver module, Vishay remote control IR receiver, Vishay TSOP IR receiver, Vishay TSSP IR receiver, IR receiver module, infrared receiver module, IR remote receiver, demodulating IR receiver, PIN diode preamplifier IR receiver, IR receiver with AGC, long burst IR receiver, 38kHz IR receiver, 36kHz IR receiver, 40kHz IR receiver, 2.0V to 5.5V IR receiver, MCU IR receiver Hashtags: #VishayIRReceiver #VishayTSOP #VishayTSSP #IRReceiver #InfraredReceiver #RemoteControlReceiver #IRRemoteReceiver #DemodulatingIRReceiver #PINPhotodiode #PreamplifierIRReceiver #AGCIRReceiver #LongBurstIRReceiver #38kHzIRReceiver #36kHzIRReceiver #40kHzIRReceiver #MCUInfraredReceiver

6A 48V 26.7V Bidirectional 24V SOT-23 ESD and Surge Protection (TVS/ESD) ROHS The PESD1CAN is a bidirectional TVS (Transient Voltage Suppression) diode designed to protect automotive CAN bus communication lines from damage caused by ESD (electrostatic discharge), surge, and electrical fast transients. It uses silicon avalanche technology in a compact SOT-23 surface-mount package, allowing protection of two CAN signal lines with a single device. The diode is optimized for high-speed and fault-tolerant CAN networks commonly used in automotive and industrial systems. ESD protection up to ±30 kV (IEC 61000-4-2, air/contact) Peak pulse power: 200 W (8/20 µs waveform) Bidirectional protection for CAN_H and CAN_L lines Low clamping voltage for better signal protection Ultra-low leakage current (<1 µA typical) Low junction capacitance (~12–15 pF) for high-speed CAN signals Matched diode capacitance (very low mismatch ~0.1%) for signal integrity Small SOT-23 package (3-pin SMD) Complies with IEC 61000-4-2, -4-4, and -4-5 surge standards #CommonPartsLibrary #Diode

DIODE GP 75V 150mA SOD-123 The 1N4148 (SOD-123) is a silicon epitaxial planar switching diode designed for fast switching applications. It is widely used in surface-mount designs as the SMD version of the classic 1N4148 (DO-35 through-hole type). It is mainly used for low-current, high-speed switching circuits, such as signal clamping, protection, logic circuits, and general rectification in small electronics. Key Features Fast switching speed (reverse recovery time typically ≤ 4 ns) Reverse voltage up to 100 V (peak) Average forward current: ~150 mA Compact SOD-123 surface-mount package (2-pin SMD) Low power dissipation (~400–500 mW depending on manufacturer) Low reverse leakage current (very small, µA or less) Low junction capacitance (~2–4 pF typical) for high-speed operation Wide operating temperature range: -55°C to +150°C Suitable for automatic PCB assembly (SMT reflow compatible) #CommonPartsLibrary #Diode

-40℃~+85℃ 120° 3.2V 527nm 5mA 685mcd 80mW Discrete Diode Emerald Green Water Clear 0603 LED Indication - Discrete ROHS The BZ-C0603-G3-F1 is a surface-mount (SMD) 0603 chip LED designed to emit emerald green light (~527 nm). It is optimized for low-power indicator applications and backlighting, offering high brightness in a very small package size suitable for modern compact PCB designs. ⭐ Key Features 📦 Package: 0603 (1.6 × 0.8 mm SMT LED) 💡 Color: Emerald Green / Green LED (~527 nm wavelength) 🔆 Luminous intensity: up to ~685 mcd (typical high-brightness grade) ⚡ Forward voltage: ~2.6 V to 3.2 V (typical at 5 mA) 🔌 Forward current: ~5 mA (typical operating current) 📐 Viewing angle: ~120° wide viewing angle 🔥 Power rating: ~80 mW maximum 🌡️ Operating temperature: −40°C to +85°C 🧲 ESD protection: up to ~2000 V (HBM) ♻️ RoHS compliant, suitable for automated SMT assembly #CommonPartsLibrary #LED

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 10-VFDFN Exposed Pad The TPS5433xA family of devices are synchronous converters with an input-voltage range of 4.5 V to 28 V. These devices include This device has an integrated low-side switching FET that eliminates the need for an external diode which reduces component count. Efficiency is maximized through the integrated 128- mΩ and 84-mΩ MOSFETs, low IQ and pulse skipping at light loads. Using the enable pin, the shutdown supply current is reduced to 2 μA. This step-down (buck) converter provides accurate regulation for a variety of loads with a well-regulated voltage reference that is 1.5% over temperature. Cycle-by-cycle current limiting on the high-side MOSFET protects the TPS5433xA family of devices in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. A low-side sinking current-limit turns off the low-side MOSFET to prevent excessive reverse current. Hiccup protection is triggered if the overcurrent condition continues for longer than the preset time. Thermal shutdown disables the device when the die temperature exceeds the threshold and enables the device again after the built-in thermal hiccup time. • Synchronous 128-mΩ and 84-mΩ MOSFETs for 3-A Continuous Output Current • TPS54335A: Internal 2-ms Soft-Start, 50-kHz to 1.5-MHz Adjustable Frequency • TPS54336A: Adjustable Soft-Start, Fixed 340-kHz Frequency • Low 2-µA Shutdown, Quiescent Current • 0.8-V Voltage Reference with ±0.8% Accuracy • Current Mode Control • Monotonic Startup into Pre-Biased Outputs • Pulse Skipping for Light-Load Efficiency • Hiccup Mode Overcurrent Protection • Thermal Shutdown (TSD) and Overvoltage Transition Protection • 8-Pin SO PowerPAD™ and 10-Pin VSON Package • Create a Custom Design Using the TPS54335A with the WEBENCH Power Designer #CommonPartsLibrary #IntegratedCircuit #PowerManagement