Linear Voltage Regulator IC Positive Fixed 1 Output 600mA SOT-25 3.3V LDO AP2112K-3.3 The AP2112K-3.3TRG1 is a low dropout (LDO) linear voltage regulator designed to provide a stable 3.3V output from a higher input voltage. It is optimized for low noise, high power supply rejection ratio (PSRR), and low quiescent current, making it suitable for battery-powered and noise-sensitive applications. The device features current limiting and thermal shutdown protection, ensuring reliable operation under fault conditions. It is commonly used in portable electronics, RF modules, microcontroller power supplies, and other low-power systems. Key Features Fixed output voltage: 3.3V Output current: up to 600 mA Low dropout voltage: ~250 mV at 300 mA load High PSRR: up to 70 dB at 1 kHz Low quiescent current: typically 55 µA Stable with low ESR ceramic capacitors Built-in overcurrent protection Thermal shutdown protection Fast transient response Absolute Maximum Ratings Input Voltage (VIN): up to 6.5 V Output Current: Internally limited Operating Junction Temperature: -40°C to +125°C Storage Temperature: -65°C to +150°C Electrical Characteristics (Typical values unless otherwise specified) Output Voltage Accuracy: ±2% Dropout Voltage: 250 mV @ 300 mA 400 mV @ 600 mA Line Regulation: 0.05%/V Load Regulation: 0.2% Quiescent Current: 55 µA Shutdown Current: <1 µA PSRR: 70 dB @ 1 kHz 45 dB @ 10 kHz Pin Configuration (SOT-23-5 / SC-70-5) VIN – Input voltage GND – Ground EN – Enable (active high) NC – No connection VOUT – Regulated output (3.3V) Package Information Package Type: SOT-23-5 (TRG1 suffix indicates tape & reel) Mounting: Surface mount Small footprint suitable for compact PCB layouts Typical Applications Battery-powered devices Wireless modules (Wi-Fi, Bluetooth, RF) Microcontroller and FPGA power supplies Portable consumer electronics Sensor and analog circuits requiring low noise Compliance & Reliability RoHS compliant Lead-free package Designed for high reliability and long operational life #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LinearRegulator #VoltageRegulator

Red 631nm LED Indication - Discrete 2V 0603 (1608 Metric) The LTST-C190KRKT is a surface-mount red LED designed for compact electronic applications requiring reliable visual indication. It is housed in a standard chip LED package, making it suitable for automated assembly processes. This device offers high luminous intensity with low power consumption, ideal for status indicators, backlighting, and display applications. Key Features High brightness red LED Compact surface-mount package (0603 / 1608 metric) Low forward voltage and low power consumption Wide viewing angle for uniform illumination Compatible with automated placement equipment RoHS compliant and lead-free Electrical Characteristics (Typical @ 25°C) Forward Voltage (Vf): 2.0 V (typ), 2.4 V (max) Forward Current (If): 20 mA (recommended) Luminous Intensity: ~100–180 mcd Wavelength (Peak): ~631 nm (red) Optical Characteristics Color: Red Viewing Angle: 120° (typ) Absolute Maximum Ratings Forward Current: 30 mA (continuous) Peak Forward Current: 100 mA (pulse) Power Dissipation: ~75 mW Operating Temperature Range: -40°C to +85°C Storage Temperature Range: -40°C to +100°C Mechanical Characteristics Package Type: SMD Chip LED Package Size: 0603 (1.6 mm × 0.8 mm) Mounting Type: Surface Mount Lens Type: Clear Applications Status indicators in electronic devices Backlighting for displays and keypads Consumer electronics Industrial control panels Portable and battery-powered devices #commonpartslibrary #optoelectronic #led #red

Bipolar (BJT) Transistor NPN 40V 200 mA 300MHz 300 mW Surface Mount SOT-23-3 (TO-236) The MMBT3904LT1G is a general-purpose NPN bipolar junction transistor designed for switching and amplification applications. It is housed in a compact SOT-23 surface-mount package, making it suitable for high-density PCB designs. This transistor is widely used in low-power signal processing, digital switching, and analog amplification circuits due to its reliable performance and fast switching characteristics. Key Features General-purpose NPN transistor Compact SOT-23 surface-mount package Fast switching speed Low saturation voltage Suitable for low-current and low-power applications High reliability and stability Pb-free, Halogen-free, and RoHS compliant Electrical Characteristics (Typical @ 25°C unless otherwise specified) Collector-Emitter Voltage (VCEO): 40 V Collector-Base Voltage (VCBO): 60 V Emitter-Base Voltage (VEBO): 6 V Collector Current (IC): 200 mA (max) DC Current Gain (hFE): 100 – 300 Collector-Emitter Saturation Voltage (VCE(sat)): 0.2 V (typ) Transition Frequency (fT): ~300 MHz Absolute Maximum Ratings Collector Current (Continuous): 200 mA Power Dissipation: ~225 mW Junction Temperature: +150°C (max) Operating Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Mechanical Characteristics Package Type: SOT-23 (TO-236AB) Mounting Type: Surface Mount Number of Pins: 3 Marking Code: Dependent on lot/manufacturer marking Applications General-purpose switching circuits Signal amplification Digital logic interfacing LED drivers and small load switching Audio and RF signal processing #CommonPartsLibrary #TransistorBJT #MMBT2222

JST PH SMD Connector Header Surface Mount, Right Angle 2 position 0.079" (2.00mm) The S2B-PH-SM4-TB(LF)(SN) is a surface-mount, 2-position wire-to-board header connector from the JST PH series. It is designed for compact and reliable connections in low-current, signal, and power applications. With a 2.0 mm pitch and secure friction-lock mechanism, this connector ensures stable mating with corresponding PH series crimp housings. The connector features side-entry (horizontal) orientation and solder tabs for enhanced PCB retention, making it suitable for automated assembly and high-vibration environments. Key Features 2-position connector (2 circuits) 2.0 mm pitch spacing Surface-mount, right-angle (side entry) configuration Friction-lock mechanism for secure mating Solder hold-down tabs for mechanical stability Compact, low-profile design Compatible with JST PH series housings and terminals Tape & reel packaging for automated assembly Mechanical Characteristics Mounting Type: Surface Mount (SMT) Orientation: Right Angle (Side Entry) Pitch: 2.0 mm Number of Positions: 2 Mating Type: Friction lock Board Retention: Solder tabs (SM4 type) Electrical Characteristics Rated Current: 2 A (per contact, AWG #24) Rated Voltage: 100 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 100 MΩ Withstanding Voltage: 800 VAC/minute Material Specifications Insulator: Polyamide (Nylon), UL94V-0 rated Contact Material: Copper alloy Contact Plating: Tin over nickel (Sn plating) Environmental Specifications Operating Temperature Range: -25°C to +85°C Storage Temperature: -40°C to +85°C Packaging Information Packaging Type: Tape & Reel (TB suffix) Lead-Free: Yes (LF) Surface Finish: Tin plating (SN) Compatible Components Mating Housing: JST PH series (e.g., PHR-2) Crimp Terminals: SPH-002T-P0.5S or equivalent Typical Applications Consumer electronics Battery connections Signal and low-power connections Embedded systems and IoT devices Portable and compact electronic assemblies #commonpartslibrary #connector #header #tht

Slide Switch SPST 4A 125V Throuh Hole The L101011MS02Q is a single-pole, single-throw (SPST) miniature toggle switch designed for low-power switching applications. It features a compact panel-mount design with a durable actuator and reliable contact mechanism, making it suitable for control and signal switching in industrial, instrumentation, and consumer electronics. The switch provides a maintained (latching) ON-OFF function and is built for long mechanical and electrical life. Key Features SPST (Single Pole, Single Throw) configuration ON-OFF maintained switching function Miniature toggle actuator Panel mount design with threaded bushing Solder lug terminals for secure wiring High mechanical durability Compact form factor Mechanical Characteristics Mounting Type: Panel mount Actuator Type: Toggle lever Bushing Type: Threaded, with nut and washer Terminal Type: Solder lug Number of Poles: 1 Number of Throws: 1 Switching Function: ON-OFF (latching) Electrical Characteristics Rated Voltage: 125 VAC / 28 VDC Rated Current: 3 A @ 125 VAC, 6 A @ 28 VDC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Strength: 1,000 VAC for 1 minute Material Specifications Housing: Thermoplastic or phenolic (manufacturer dependent) Actuator: Metal (nickel-plated brass) Contacts: Copper alloy with silver plating Terminals: Brass, tin-plated Environmental Specifications Operating Temperature Range: -30°C to +85°C Storage Temperature: -40°C to +85°C Mechanical Life Mechanical Life: ≥ 40,000 cycles Electrical Life: ≥ 10,000 cycles (at rated load) Typical Applications Control panels Power switching for small devices Instrumentation equipment Audio equipment Industrial and consumer electronics #commonpartslibrary #rocker #switch #spst

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole USB Type-C receptacle 16 pin USB2.0 The USB4215-03-A is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a 16-pin configuration supporting reversible plug orientation with standard USB 2.0 differential data lines and configuration channel (CC) pins. The connector is intended for surface-mount PCB assembly with through-hole shell stakes for enhanced mechanical strength. It is widely used in compact embedded systems for power delivery, charging interfaces, and basic data communication. Key Features USB Type-C receptacle (USB 2.0 compliant) 16 functional pins (no SuperSpeed support) Reversible plug orientation Surface-mount contacts with through-hole shell tabs Compact, low-profile design High insertion cycle durability Suitable for automated assembly Electrical Characteristics Rated Current: VBUS: up to 5.0 A (depending on PCB design and cable) Signal pins: 0.25 A max Rated Voltage: 20 V DC max Contact Resistance: ≤ 40 mΩ Insulation Resistance: ≥ 100 MΩ Dielectric Withstanding Voltage: 100 V AC Mechanical Characteristics Mounting Type: Surface Mount (SMT) with Through-Hole Shield Tabs Number of Positions: 16 Mating Cycles: 10,000 cycles (typical) Insertion Force: 5–20 N Extraction Force: 8–20 N Material Specifications Contacts: Copper Alloy Contact Plating: Gold over Nickel Housing: High-temperature thermoplastic (UL94V-0) Shell: Stainless Steel Environmental Characteristics Operating Temperature Range: -25°C to +85°C Storage Temperature Range: -40°C to +85°C RoHS Compliant: Yes Halogen Free: Yes Pin Configuration (USB 2.0 Type-C) VBUS (Power) GND (Ground) D+ / D− (USB 2.0 differential pair) CC1 / CC2 (Configuration channel) SBU pins (optional/unused in USB 2.0 designs) Applications USB power input (5 V / USB-C PD trigger designs) Embedded systems and development boards Consumer electronics Charging interfaces Low-speed USB communication devices Packaging Tape & Reel for automated pick-and-place assembly Compliance & Standards USB Type-C Specification (USB 2.0 interface) RoHS / REACH compliant UL recognized materials #CommonPartsLibrary #Connector #USB-C

Connector Header Through Hole 6 position 0.100" (2.54mm) The 640456-6 is a 6-position, single-row wire-to-board header connector from TE Connectivity (AMP series), designed for reliable power and signal connections in a wide range of electronic applications. It features a 2.54 mm pitch and through-hole mounting for strong mechanical retention and ease of assembly. The connector is commonly used with matching crimp housings and terminals, providing a secure and serviceable interconnect solution for PCB-based systems. Key Features 6-position (1x6) header connector 2.54 mm pitch spacing Through-hole mounting (THT) Vertical (top-entry) orientation Friction-lock compatible with mating housings Tin-plated contacts for good conductivity and corrosion resistance Durable thermoplastic housing Mechanical Characteristics Mounting Type: Through Hole Orientation: Vertical (Top Entry) Pitch: 2.54 mm Number of Positions: 6 Row Configuration: Single row Mating Type: Friction fit with compatible housing Termination Type: Solder tails Electrical Characteristics Rated Current: Up to 3 A per contact (depending on wire gauge) Rated Voltage: 250 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Withstanding Voltage: 1,000 VAC Material Specifications Housing: Thermoplastic, UL94V-0 rated Contacts: Copper alloy Contact Plating: Tin over nickel Environmental Specifications Operating Temperature Range: -40°C to +105°C Storage Temperature: -40°C to +105°C Packaging Information Packaging Type: Bulk or tray (varies by supplier) RoHS Compliant: Yes Lead-Free: Yes Compatible Components Mating Housing: TE Connectivity compatible crimp housings (e.g., AMP series) Crimp Terminals: соответствующие crimp contacts for 2.54 mm systems Typical Applications PCB interconnects Consumer electronics Industrial control systems Power and signal distribution Prototyping and development boards #CommonPartsLibrary #Connector #Header #Male-pins #MTA-100

Electronic Fuse Regulator 5.3A 20-WQFN (3x4) The TPS25940LRVCR is a compact eFuse (electronic fuse) power management IC from Texas Instruments designed to provide advanced power-path protection and load management for systems such as SSDs, servers, storage devices, and embedded electronics. It integrates protection features like overcurrent limiting, reverse current blocking, overvoltage protection, and controlled startup sequencing into a single chip. Wide input voltage range: 2.7 V to 18 V Adjustable current limit: 0.6 A to 5.3 A Low ON resistance: 42 mΩ typical True reverse current blocking using back-to-back MOSFETs Programmable output slew rate (dV/dt control) for inrush current management Overvoltage and undervoltage protection Fault and Power-Good outputs for system monitoring Current monitor (IMON) output Low-power DevSleep support for SSD applications Fast reverse voltage shutdown (~1 µs) Operating temperature: −40°C to +125°C junction temperature Available in a compact 20-pin WQFN package Typical Applications PCIe / SATA / SAS SSDs and HDDs Enterprise servers and storage systems RAID controller cards Smart load switches Set-top boxes and gaming systems Backup power and holdup capacitor systems Component Category This component belongs to: Power Management IC (PMIC) More specifically: eFuse / Hot-swap / Load Switch IC Package Information Package type: 20-WQFN (3 mm × 4 mm) Mounting type: Surface Mount (SMD) #commonpartslibrary #integratedcircuit #powermanagement #currentregulation

Green LED Indication - Discrete 2.2V 0603 (1608 Metric) The SML-LX0603GW-TR is a surface-mount white LED in a compact 0603 (1608 metric) package, designed for indicator and backlighting applications. It offers high brightness with low power consumption and wide viewing angle, making it suitable for portable and space-constrained electronic devices. The device is optimized for automated assembly and is supplied in tape-and-reel packaging. Key Features White LED (cool white emission) Compact 0603 (1.6 mm × 0.8 mm) SMD package High luminous intensity with low forward current Wide viewing angle (~120° typical) Low power consumption Compatible with reflow soldering Tape & reel packaging for automated assembly Optical Characteristics (Typical values) Emission Color: White Luminous Intensity: ~100 to 300 mcd @ 20 mA Color Temperature: ~6000K to 8000K Viewing Angle: 120° Electrical Characteristics (Typical values unless otherwise specified) Forward Voltage (VF): Typ: 3.0 V Max: 3.4 V @ 20 mA Forward Current (IF): 20 mA (continuous) Reverse Voltage (VR): 5 V Power Dissipation: ~75 mW Absolute Maximum Ratings Forward Current: 25 mA (continuous) Peak Forward Current: 100 mA (pulse, short duration) Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +100°C Mechanical Characteristics Package Type: 0603 (1608 metric) Dimensions: ~1.6 mm × 0.8 mm × 0.8 mm Mounting Type: Surface mount (SMT) Polarity: Cathode marking on package Material Specifications Lens: Epoxy resin (diffused) LED Chip: InGaN (Indium Gallium Nitride) Lead Frame: Copper alloy with silver plating Packaging Information Packaging Type: Tape & Reel (TR) Reel Quantity: Typically 3,000–5,000 pcs per reel RoHS Compliant: Yes Lead-Free: Yes Typical Applications Status indicators Backlighting (LCD, keypad, buttons) Consumer electronics Portable devices Automotive interior lighting (low-power) #commonpartslibrary #optoelectronic #led #SML-LX0603

Tactile Switch SPST-NO Top Actuated Surface Mount The B3FS-1002P is a compact, surface-mount tactile switch designed for low-profile input applications. It provides a momentary contact mechanism with a distinct tactile feedback, making it suitable for user interface controls in consumer electronics, industrial devices, and compact embedded systems. The switch features a sealed construction for improved reliability and is optimized for automated PCB assembly processes. Mechanical Characteristics Mounting Type: Surface Mount (SMD) Actuator Style: Top push Actuator Height: Low profile Outline: Rectangular compact body Terminal Type: Gull-wing terminals Sealing: Dust-resistant (sealed construction) Electrical Characteristics Switch Type: Single Pole Single Throw (SPST) Contact Configuration: Normally Open (NO) Rated Voltage: Low voltage DC applications Rated Current: Suitable for signal-level switching Contact Resistance: Low initial contact resistance Insulation Resistance: High insulation resistance between terminals Operating Characteristics Operating Force: Standard tactile force (manufacturer-defined variant) Travel Distance: Short stroke tactile action Operating Life: High durability for repeated actuation cycles Bounce Time: Minimal contact bounce for reliable switching Environmental Characteristics Operating Temperature Range: Wide operating range suitable for consumer and industrial use Storage Temperature Range: Standard electronic component storage conditions Humidity Resistance: Designed to withstand typical ambient humidity conditions Material & Construction Actuator Material: High-strength polymer Housing Material: Heat-resistant plastic Contact Material: Metal alloy with surface plating for durability Terminal Finish: Solderable finish compatible with reflow soldering Packaging Information Packaging Type: Tape and reel Assembly Compatibility: Fully compatible with automated pick-and-place and reflow processes Applications Consumer electronics (keypads, remote controls) Industrial control panels Portable devices Embedded system user interfaces Wearable and compact electronics #commonpartslibrary #switch #tactile

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-23-5 The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to provide a stable 3.3 V output from a higher input voltage source. It features ultra-low quiescent current and high power-supply rejection ratio (PSRR), making it ideal for battery-powered and noise-sensitive applications such as IoT devices, portable electronics, and RF circuits. The device is optimized for fast transient response and stable operation with small ceramic output capacitors. Key Features Fixed output voltage: 3.3 V Low dropout voltage (typ. ~200 mV at full load) Ultra-low quiescent current (typ. 25 µA) High PSRR for noise-sensitive applications Stable with small ceramic capacitors (≥1 µF) Thermal shutdown and overcurrent protection Available in compact SOT-23-5 package (DBV) Absolute Maximum Ratings Input voltage: –0.3 V to 6.5 V Output voltage: –0.3 V to (VIN + 0.3 V) Operating junction temperature: –40°C to +125°C Storage temperature range: –65°C to +150°C Recommended Operating Conditions Input voltage range: 1.45 V to 5.5 V Output voltage: 3.3 V (fixed) Output current: up to 500 mA Operating temperature range: –40°C to +125°C Electrical Characteristics (Typical unless otherwise noted) Output voltage accuracy: ±1% Dropout voltage: ~200 mV @ 500 mA Quiescent current: ~25 µA PSRR: up to 70 dB (at 1 kHz) Line regulation: <0.05%/V Load regulation: <0.5% Pin Configuration (SOT-23-5) Pin 1: IN – Input voltage Pin 2: GND – Ground Pin 3: EN – Enable (active high) Pin 4: NC – No connect Pin 5: OUT – Regulated output Typical Application Power management for microcontrollers and sensors Battery-powered portable devices RF and analog circuits requiring low noise supply IoT and wearable electronics Protection Features Thermal shutdown protection Overcurrent protection Undervoltage lockout (UVLO) #commonpartsLibrary #integratedcircuit #powermanagement #voltageregulator

Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-WSON (2x2) The TMP117AIDRVR is a high-precision digital temperature sensor manufactured by Texas Instruments. The device provides accurate temperature measurements through an I²C-compatible digital interface and is optimized for applications requiring medical-grade accuracy, low power consumption, and compact PCB footprint. The sensor integrates a precision temperature sensing element, analog-to-digital converter, calibration memory, and digital interface into a single compact package. The device supports continuous conversion and shutdown operating modes, enabling efficient thermal monitoring in battery-powered and always-on systems. Internal calibration minimizes external component requirements while providing highly linear and repeatable temperature measurements across an extended operating range. The TMP117AIDRVR is commonly used in industrial controls, wearable electronics, healthcare equipment, environmental monitoring systems, battery management systems, consumer electronics, and precision instrumentation. Electrical Characteristics Supply voltage supports low-voltage digital systems and portable electronics applications. Ultra-low operating current enables long battery life in energy-sensitive designs. Integrated EEPROM allows programmable offset correction and configuration storage. Digital output eliminates the need for external ADC circuitry. High measurement resolution supports precision thermal monitoring applications. Low self-heating characteristics improve measurement stability and accuracy. Functional Features High-accuracy digital temperature sensing. I²C and SMBus compatible communication interface. Programmable alert functionality for thermal threshold monitoring. Continuous conversion and low-power shutdown operating modes. Integrated non-volatile memory for user configuration storage. Wide operating temperature range for industrial and commercial environments. Fast conversion timing suitable for real-time monitoring systems. Factory-calibrated performance requiring minimal external calibration. Package Information Package type is WSON with compact surface-mount footprint suitable for dense PCB layouts. Moisture-sensitive package designed for automated assembly processes. Lead-free and RoHS-compliant construction. Typical Applications Medical thermometers and patient monitoring systems. Industrial temperature monitoring equipment. Battery-powered portable electronics. HVAC and environmental sensing systems. Data acquisition and instrumentation systems. Server and embedded thermal management applications. Consumer electronics requiring precision thermal sensing. #commonpartslibrary #integratedcircuit #temperaturesensor

Fuse Holder 80V 1 Circuit Blade Through Hole General Description The 178.7017.0001 is a PCB-mounted fuse holder designed for cartridge fuses, typically used in power input protection circuits. It provides a secure and reliable method for mounting and replacing fuses in electronic assemblies. This component is commonly used in industrial equipment, power supplies, and consumer electronics where overcurrent protection is required. Key Features Designed for standard cartridge fuses (commonly 5x20 mm format) Through-hole PCB mounting for secure mechanical stability Reliable electrical contact with low resistance Easy fuse replacement and maintenance High-temperature resistant housing material Suitable for mains and low-voltage applications Mechanical Characteristics Mounting Type: Through-Hole (THT) Fuse Size Compatibility: 5 mm x 20 mm Orientation: Vertical PCB mount Housing Material: Thermoplastic (UL94 V-0 rated) Pin Configuration: 2-pin Electrical Characteristics Rated Current: Up to 10 A (depending on fuse used) Rated Voltage: Up to 250 VAC Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) Storage Temperature Range: -40°C to +85°C Flame Rating: UL94 V-0 compliant Applications Power supply units Industrial control systems Consumer electronics Battery chargers AC mains protection circuits Compliance & Standards RoHS compliant UL recognized materials (depending on manufacturer variant) Notes Ensure compatibility with selected fuse rating and type Observe proper PCB layout spacing for high-voltage applications Follow safety standards when used in mains-powered circuits #commonpartslibrary #circuitprotection #fuseholder

Diode 40 V 3A Surface Mount SMB Schottky diode 3A 40V SMB The B340B-13-F is a surface-mount Schottky barrier rectifier diode designed for efficient power rectification in low-voltage, high-frequency applications. It features low forward voltage drop and fast switching capability, making it suitable for DC-DC converters, power supplies, reverse polarity protection, and freewheeling diode applications. The device is housed in a compact SMB (DO-214AA) package, enabling high current handling in space-constrained designs. ELECTRICAL CHARACTERISTICS Reverse Voltage (VRRM): 40 V Average Forward Current (IF(AV)): 3 A Forward Voltage (VF): 0.5 V (typical at IF = 3 A) Reverse Leakage Current (IR): 0.5 mA (max at VR = 40 V, 25°C) Peak Surge Current (IFSM): 80 A (8.3 ms single half sine wave) THERMAL CHARACTERISTICS Operating Junction Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Thermal Resistance Junction-to-Ambient (RθJA): ~75 °C/W MECHANICAL CHARACTERISTICS Package Type: SMB (DO-214AA) Mounting Type: Surface Mount (SMD) Polarity: Cathode marked by band Weight: ~0.1 g FEATURES Low forward voltage drop for improved efficiency High surge current capability Fast switching speed Low power loss and high reliability Compact SMB package for space-saving PCB layout RoHS compliant and halogen-free APPLICATIONS Switch-mode power supplies (SMPS) DC-DC converters Reverse polarity protection circuits Freewheeling and clamping diodes Battery charging circuits MANUFACTURER / PART DETAILS Manufacturer: Diodes Incorporated Part Number: B340B-13-F Package Code: SMB (DO-214AA) #Diode #Rectifier #Single-Diode #SCHOTTKY #B340

Telecom Relay DPDT (2 Form C) Through Hole The G6K-2P-Y DC5 is a compact, ultra-miniature signal relay designed for high-density PCB mounting applications. Manufactured by Omron, this relay features a DPDT (2 Form C) contact configuration and operates with a 5 VDC coil. It is optimized for switching low-level signals and is commonly used in telecommunications, test and measurement equipment, and consumer electronics where space-saving and high reliability are critical. Key Features Ultra-miniature, low-profile design for high-density mounting DPDT (2 Form C) contact configuration High sensitivity coil (low power consumption) Gold-clad contacts for low-level signal switching High reliability and long mechanical life Fully sealed construction (flux protection) Suitable for surface-mount and through-hole variants (depending on suffix) Electrical Characteristics Coil Specifications Rated Coil Voltage: 5 VDC Coil Resistance: ~125 Ω Coil Current: ~40 mA Power Consumption: ~200 mW Must Operate Voltage: ≤ 75% of rated voltage Must Release Voltage: ≥ 10% of rated voltage Contact Specifications Contact Configuration: DPDT (2 Form C) Contact Material: Gold-clad silver alloy Contact Rating: 1 A at 30 VDC 0.5 A at 125 VAC Maximum Switching Voltage: 125 VAC / 60 VDC Maximum Switching Current: 1 A Maximum Switching Power: 30 W (DC) 62.5 VA (AC) Timing Characteristics Operate Time: ≤ 3 ms Release Time: ≤ 3 ms Insulation Characteristics Insulation Resistance: ≥ 1,000 MΩ (at 500 VDC) Dielectric Strength: Between Coil and Contacts: 1,000 VAC (1 min) Between Open Contacts: 500 VAC (1 min) Mechanical Characteristics Mounting Type: Through-hole (Y variant, PCB terminal) Weight: ~1 g Enclosure: Sealed (flux-resistant) Environmental Specifications Operating Temperature Range: -40°C to +70°C Storage Temperature Range: -40°C to +85°C Vibration Resistance: 10 to 55 Hz, 1.5 mm double amplitude Shock Resistance: 1,000 m/s² Life Expectancy Mechanical Life: ≥ 100 million operations Electrical Life: ≥ 100,000 operations (at rated load) Applications Telecommunications equipment Test and measurement instruments Audio signal routing Industrial control systems Consumer electronics Package Information Manufacturer: Omron Electronics Series: G6K Part Number: G6K-2P-Y DC5 #commonpartslibrary #relay

4.7 µH Shielded Drum Core, Wirewound Inductor 2.6 A 105mOhm Max 2-SMD The SRP4020TA-4R7M is a compact surface-mount power inductor designed for use in high-efficiency power conversion and energy storage applications. It is optimized for switching regulators, DC-DC converters, and filtering circuits where stable inductance, low core loss, and reliable current handling are required. The device features a magnetically shielded construction that minimizes electromagnetic interference, making it suitable for densely populated electronic assemblies. Its robust design supports consistent performance across a wide range of operating conditions, contributing to improved system efficiency and reduced noise. Construction and Materials The component is manufactured using a ferrite core with integrated winding, enclosed in a molded structure that provides mechanical stability and environmental protection. The shielding structure reduces flux leakage and enhances electromagnetic compatibility. External terminations are designed for reliable solderability and strong adhesion to standard printed circuit board pads. Electrical Characteristics The inductor provides a nominal inductance corresponding to its designation and maintains stability under rated operating conditions. It exhibits low direct current resistance to minimize conduction losses and supports moderate to high current levels without significant saturation. The component is engineered to maintain performance over variations in temperature and frequency typical of switching power applications. Thermal Performance The device is capable of operating within standard industrial temperature ranges, with thermal characteristics that support efficient heat dissipation through the PCB. Its construction helps maintain inductance stability and prevents degradation under thermal stress. Mechanical Characteristics The package is a low-profile, surface-mount form factor suitable for automated assembly. The compact footprint enables use in space-constrained designs, while the structure ensures durability during handling and reflow soldering processes. Applications Typical applications include step-down and step-up voltage regulators, power management modules, portable electronics, telecommunications equipment, and general-purpose filtering where compact size and efficient performance are critical. Reliability and Compliance The component is designed to meet common industry reliability standards for surface-mount passive devices. It is compatible with standard reflow soldering processes and is typically compliant with environmental regulations governing hazardous substances. #commonpartslibrary #inductor

Diode Array 1 Pair Common Cathode 200 V 15A Through Hole TO-220-3 The V30202C-M3/4W is a surface-mount Schottky barrier rectifier designed for high-efficiency power conversion and fast switching applications. It features a low forward voltage drop and high surge current capability, making it suitable for switching power supplies, DC-DC converters, freewheeling diodes, and polarity protection circuits. The device is housed in a compact DO-214AB (SMC) package, enabling high power density and reliable thermal performance in space-constrained designs. Key Features Schottky barrier technology for fast switching Low forward voltage drop for improved efficiency High forward current capability Low power loss and high reliability High surge current capability Surface-mount DO-214AB (SMC) package RoHS compliant and halogen-free Absolute Maximum Ratings Repetitive peak reverse voltage: 200 V Average forward rectified current: 30 A Non-repetitive peak surge current: 300 A Operating junction temperature range: -55°C to +150°C Storage temperature range: -55°C to +150°C Electrical Characteristics Forward voltage drop: approximately 0.85 V at rated current Reverse leakage current: low, typically in the mA range at rated voltage Reverse recovery time: negligible (Schottky device) Thermal resistance junction-to-case: low for efficient heat dissipation Mechanical Characteristics Package type: DO-214AB (SMC) Mounting type: Surface mount Polarity: Cathode band marking Terminal finish: Solderable, compatible with reflow processes Applications Switching power supplies DC-DC converters Freewheeling and clamping diodes Reverse polarity protection Battery-powered systems Automotive and industrial power circuits Pin Configuration Anode: Connected to the device substrate Cathode: Marked terminal (banded side) #CommonPartLibrary #Diode #Rectifier #DiodeArray