This is a submodule of high efficiency synchronous step-down dc-dc converters optimized for battery powered portable applications. #power #dcdc #ti #buck

Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A SOT-23-6 Thin, TSOT-23-6 The AP63200/AP63201/AP63203/AP63205 is a 2A, synchronous buck converter with a wide input voltage range of 3.8V to 32V and fully integrates a 125mΩ high-side power MOSFET and a 68mΩ low-side power MOSFET to provide high-efficiency step-down DC/DC conversion. The AP63200/AP63201/AP63203/AP63205 device is easily used by minimizing the external component count due to its adoption of peak current mode control along with its integrated compensation network. The AP63200/AP63201/AP63203/AP63205 has optimized designs for Electromagnetic Interference (EMI) reduction. The converter features Frequency Spread Spectrum (FSS) with a switching frequency jitter of ±6%, which reduces EMI by not allowing emitted energy to stay in any one frequency for a significant period of time. It also has a proprietary gate driver scheme to resist switching node ringing without sacrificing MOSFET turn-on and turn-off times, which further erases highfrequency radiated EMI noise caused by MOSFET switching. The device is available in a low-profile, TSOT26 package. • VIN 3.8V to 32V • 2A Continuous Output Current • 0.8V ±1% Reference Voltage • 22µA Ultralow Quiescent Current • Switching Frequency o 500kHz: AP63200 and AP63201 o 1.1MHz: AP63203 and AP63205 • Pulse Width Modulation (PWM) Regardless of Output Load o AP63201 • Supports Pulse Frequency Modulation (PFM) o AP63200, AP63203, and AP63205 o Up to 80% Efficiency at 1mA Light Load o Up to 88% Efficiency at 5mA Light Load • Fixed Output Voltage o 3.3V: AP63203 o 5.0V: AP63205 • Proprietary Gate Driver Design for Best EMI Reduction • Frequency Spread Spectrum (FSS) to Reduce EMI • Precision Enable Threshold to Adjust UVLO • Protection Circuitry o Overvoltage Protection o Cycle-by-Cycle Peak Current Limit o Thermal Shutdown • 12V and 24V distributed power bus supplies • Flat screen TV sets and monitors • Power tools and laser printers • White goods and small home appliances • FPGA, DSP, and ASIC supplies • Home audios • Network systems • Set top boxes • Gaming consoles • Consumer electronics #commonpartslibrary #integratedcircuit #AP63203WU7 #BuckConverter #DCDCConverter #PowerManagement #VoltageRegulator #SynchronousBuck #EmbeddedSystems #IndustrialElectronics #PowerSupply #DiodesInc #3V3Power #ElectronicsDesign

Buck Switching Regulator IC Positive Fixed 5V 1 Output 1A SOT-23-6 The LMR50410Y5FQDBVRQ1 (part of the LMR50410-Q1 family from Texas Instruments) is a synchronous step-down (buck) DC-DC converter designed for automotive and industrial power applications. It operates over a wide input voltage range of 4 V to 36 V and can deliver up to 1 A output current, making it suitable for converting higher, unregulated voltages into stable lower voltages (e.g., 5 V or 3.3 V rails). The device integrates power switches, control circuitry, and compensation internally, allowing simple design with minimal external components and a compact PCB footprint. Key Features Power & Performance Wide input voltage range: 4 V to 36 V Output current: up to 1 A High switching frequency: 2.1 MHz (enables small inductors) High efficiency with PFM (light load) and FPWM (constant frequency) options Integration & Ease of Use Synchronous rectification (integrated high-side & low-side MOSFETs) Internal compensation (no complex external tuning) Minimal external components required Small SOT-23-6 package for compact designs Protection & Reliability Cycle-by-cycle current limit Short-circuit protection (hiccup mode) Thermal shutdown protection Undervoltage lockout (UVLO) ±1% reference voltage accuracy Automotive & Industrial Capability AEC-Q100 qualified (automotive grade) Operating temperature: Ambient: up to 125°C Junction: up to 150°C Designed for rugged automotive environments Additional Features Soft-start for controlled startup Precision enable pin for system control Monotonic startup with pre-biased output Available in fixed output (e.g., 5 V) variants Typical Applications Automotive electronics (ADAS, infotainment, lighting) Industrial power supplies Distributed power systems General-purpose DC-DC regulation #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator

Buck Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A 8-PowerSOIC (0.154", 3.90mm Width) The LM5013DDAR is a 100-V input, 3.5-A buck switching regulator IC that efficiently steps down high DC voltages (such as 24 V, 48 V, or battery rails) to lower regulated outputs. It is optimized for rugged environments where wide input variations and high reliability are required. It features ultra-low quiescent current operation, making it suitable for systems that require high efficiency even at light load or standby conditions. Key Features Wide input voltage range: 6 V to 100 V Up to 3.5 A output current capability Integrated 100-V high-side MOSFET Non-synchronous buck topology Ultra-low quiescent current (IQ) for high efficiency in standby Constant-on-time (COT) control for fast transient response No external compensation components required Adjustable output voltage (down to ~1.2 V reference) 50 ns minimum on/off time for high step-down ratios Built-in protection features: Overcurrent protection Thermal shutdown Input undervoltage lockout (UVLO) Open-drain power-good (PGOOD) signal for system monitoring Meets low EMI requirements (CISPR 25 Class 5 capable) Package 8-pin SO PowerPAD (DDA) surface-mount package Designed for good thermal performance in high-voltage applications Typical Applications Industrial power supplies (24 V / 48 V systems) Automotive power systems Telecom and networking equipment High cell-count battery systems Motor control and inverter subsystems #LM5013 #BuckConverter #DCDCConverter #TexasInstruments #PowerManagementIC #HighVoltageRegulator #3ARegulator #IndustrialPower #AutomotiveElectronics #SwitchingRegulator #COTController

4-20-mA current loop transmitter with 2.5-V reference and 200-μA power 8-SOIC #commonpartslibrary #integratedcircuit #sensor #currenttransmitter

24 Bit Analog to Digital Converter 8 Input 8 Sigma-Delta 32-TQFP (5x5) The ADS131M08IPBSR is a high-precision, simultaneous-sampling analog-to-digital converter designed for multi-channel data acquisition systems requiring accurate and synchronized measurements. Manufactured by Texas Instruments, this device integrates eight differential input channels with low-noise performance, programmable gain amplification, and precision voltage reference support. The converter architecture is optimized for industrial automation, energy monitoring, medical instrumentation, and precision sensing applications where phase alignment and signal fidelity are critical. The device incorporates delta-sigma conversion technology with integrated digital filtering to provide high dynamic range and excellent noise performance across a wide operating bandwidth. It supports flexible data interface configurations through a high-speed SPI-compatible serial interface, enabling efficient communication with microcontrollers, DSPs, and FPGA-based systems. The integrated diagnostic and monitoring features improve system reliability and simplify fault detection in safety-critical applications. The ADS131M08IPBSR operates from low-voltage analog and digital supplies while maintaining low power consumption suitable for embedded and portable systems. The compact thermally enhanced package supports dense PCB layouts and reliable operation across industrial temperature environments. Engineering Specification Device Type: Simultaneous-Sampling Delta-Sigma Analog-to-Digital Converter Manufacturer: Texas Instruments Channel Configuration: Eight Differential Input Channels Resolution: Twenty-Four Bit ADC Architecture: Delta-Sigma Sampling Type: Simultaneous Sampling Input Type: Differential Analog Inputs Programmable Gain Amplifier: Integrated Data Output Interface: SPI-Compatible Serial Interface Reference Support: External Precision Voltage Reference Digital Filtering: Integrated Sinc Filter Architecture Operating Supply Voltage: Low-Voltage Analog and Digital Supplies Noise Performance: Low Noise Precision Measurement Capability Power Consumption: Optimized for Low Power Operation Diagnostics Features: Integrated Self-Monitoring and Fault Detection Temperature Range: Industrial Operating Temperature Range Package Type: TQFP Surface-Mount Package Mounting Type: Surface Mount Technology Application Areas: Energy Metering, Industrial Automation, Medical Instrumentation, Data Acquisition Systems, Multi-Channel Sensor Interfaces #commonpartslibrary #integratedcircuit #analog #digital #converter