A Flip-Flop Version Of A D Latch

A JK Flip-Flop Is A Standard Flip-Flop. Built After The SR Latch

A T Flip-Flop That Will Toggle On Clock Pulses

A JK Flip-Flop That Works On An Rising Edge. For A Normal JK Flip-Flop, Visit My Profile

"CMOS D-type flip-flops" are digital storage elements that use complementary MOSFET technology, efficiently storing and shifting binary data synchronized with a clock input.

The NE555 devices are precision timing circuits capable of producing accurate time delays or oscillation. In time-delay or monostable operating modes, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle are controlled independently with two external resistors and a single external capacitor. Each timer has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage pin (CONT). When the trigger input (TRIG) is less than the trigger level, the flip-flop is set and the output goes high. If TRIG is greater than the trigger level and the threshold input (THRES) is greater than the threshold level, the flip-flop is reset and the output is low. The reset input (RESET) overrides all other inputs and is used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the output is low, a lowimpedance path is provided between the discharge pin (DISCH) and the ground pin (GND). Tie all unused inputs to an appropriate logic level to prevent false triggering. The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5V supply, output levels are compatible with TTL inputs. Features - Timing from microseconds to hours - Astable or monostable operation - Adjustable duty cycle - TTL-compatible output can sink or source up to 200mA - On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. Applications - Pulse-shaping circuits - Missing-pulse detectors - Pulse-width modulators - Pulse-position modulators - Sequential timers - Pulse generators -F requency dividers - Industrial controls

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-SOIC (0.154", 3.90mm Width) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop #74HC74

Flip Flop 1 Element D-Type 1 Bit Positive Edge 8-XFDFN #CommonPartsLibrary #IntegratedCircuit #Logic #FLIP-FLOP #74LVC

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-SOIC (0.154", 3.90mm Width) #commonpartslibrary #integratedcircuit #flipflop

555 Type, Timer/Oscillator (Single) IC 100kHz 8-PDIP NE555 DIP-8 through hole The NE555P is a classic and widely used precision timer IC manufactured by companies like Texas Instruments and others. It belongs to the popular 555 timer family and is designed for generating accurate time delays, oscillations, and pulse signals. The “P” variant refers to the PDIP (Plastic Dual In-line Package), making it ideal for through-hole mounting, breadboarding, and prototyping. NE555P PDIP-8 timer Internally, the NE555P consists of: Two comparators A flip-flop A discharge transistor A voltage divider network These blocks allow flexible configuration for timing and waveform generation. Key Features Timing & Operation Modes Monostable mode (one-shot pulse generation) Astable mode (continuous oscillator) Bistable mode (flip-flop operation) Electrical Characteristics Supply voltage range: 4.5V to 16V Output can source or sink up to 200 mA Adjustable duty cycle Performance High timing accuracy and stability Timing range from microseconds to hours (depends on external R and C) Temperature-stable operation Package & Usability 8-pin DIP (through-hole) package Easy to use for: Breadboards DIY electronics Educational projects Common Applications LED flashers and blinkers Pulse generation Time delay circuits PWM control (e.g., dimming LEDs, motor speed control) Tone/sound generation #Timer #commonpartslibrary

Flip Flop 2 Element JK Type 1 Bit Negative Edge 16-DIP (0.300", 7.62mm) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop #74LS112

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-SOIC (0.154", 3.90mm Width) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop # 74AC74

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-DIP (0.300", 7.62mm) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop

Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-DIP (0.300", 7.62mm) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop #74LS374

Flip Flop 2 Element JK Type 1 Bit Positive Edge 16-DIP (0.300", 7.62mm) #commonpartslibrary #integratedcircuit #flipflop

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-DIP (0.300", 7.62mm) #CommonPartsLibrary #IntegratedCircuit #Logic #FlipFlop

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-SOIC (0.209", 5.30mm Width) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-TSSOP (0.173", 4.40mm Width) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop #CD4013

Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-SOIC (0.209", 5.30mm Width) #commonpartslibrary #integratedcircuit #logic #flipflop

Flip Flop 1 Element D-Type 1 Bit Positive Edge 8-XFBGA, DSBGA #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop #74AUP1G74

Flip Flop 1 Element D-Type 4 Bit Positive Edge 16-DIP (0.300", 7.62mm) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop #74LS173

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-TSSOP (0.173", 4.40mm Width) #commonpartslibrary #integratedcircuit #flipflop