5 Position Circular Connector Receptacle, Female Sockets Solder The SDS-50J is a 5-position, right-angle PCB-mount DIN receptacle connector designed for reliable signal and power connections in audio, industrial control, instrumentation, and legacy DIN-based electronic equipment. It features a standard 180° DIN pin arrangement, through-hole mounting, and durable thermoplastic construction for secure board-level integration. The connector is part of the SDS-J series and is suitable for applications requiring dependable mating cycles and long-term mechanical stability. Key Features 5-pin standard DIN receptacle (180° pin configuration) Right-angle, through-hole PCB mounting Female socket contacts Rated up to 100 VAC Current rating up to 1–2 A (depending on operating conditions) Low contact resistance (20 mΩ typical) High insulation resistance (100 MΩ minimum) 500 VAC dielectric withstand voltage Operating temperature range: -40°C to +85°C UL94V-0 flame-retardant housing RoHS compliant Designed for approximately 1,000 mating cycles #SDS50J #DINConnector #RightAngleConnector #PCBMount #ThroughHole #CircularConnector #AudioConnector #IndustrialElectronics #CUIDevices #SameSky #ElectronicComponents #InterconnectSolutions

1.5µH Shielded Molded Inductor 9.1A 15.8mOhm Max 1616 (4040 Metric) The XFL4020-152MEC is a metal-composite core, shielded surface-mount power inductor with an inductance value of 1.5 µH and a current rating of 9.1 A. Its low DCR of 15.8 mΩ maximum helps reduce conduction losses, making it suitable for efficient power conversion designs. The component is rated for automotive-grade reliability (AEC-Q200) and operates over a wide temperature range of -40°C to +125°C. Key Features Inductance: 1.5 µH Tolerance: ±20% Maximum Current Rating: 9.1 A Saturation Current (Isat): Approximately 4.6 A Low DC Resistance (DCR): 15.8 mΩ max Shielded molded construction for reduced EMI radiation Metal composite core for high efficiency and compact size Surface-mount package: 1616 / 4040 metric Dimensions: approximately 4.0 mm × 4.0 mm × 2.1 mm Self-resonant frequency: 59 MHz AEC-Q200 qualified for automotive applications Operating temperature: -40°C to +125°C Typical Applications DC/DC switching converters Power supply filtering Voltage regulator modules (VRM) Battery-powered devices Automotive power electronics Embedded power management systems Hashtags #Coilcraft #XFL4020 #PowerInductor #ShieldedInductor #SMTInductor #DC_DCConverter #PowerElectronics #AutomotiveElectronics #AECQ200 #PCBDesign #ElectronicComponents #commonpartslibrary #inductor

9 Position D-Sub Receptacle, Female Sockets Connector 2311765-1 is a 9-position right-angle D-Sub receptacle connector from the TE Connectivity AMPLIMITE HD-20 series. It is designed for wire-to-board signal applications and features through-hole PCB mounting with an integrated boardlock and 4-40 screwlock for secure mechanical retention. The connector is commonly used in industrial equipment, communication systems, embedded controllers, and other electronic devices requiring a reliable D-Sub interface. Key Features 9-position D-Sub receptacle (female) Right-angle through-hole PCB mounting AMPLIMITE HD-20 series 2-row configuration 2.77 mm (0.109") contact pitch Boardlock for improved PCB retention 4-40 screwlock for secure mating Maximum contact current: 3 A per contact Glass-filled PBT housing Operating temperature: -55°C to +85°C Ideal for signal transmission in industrial and embedded applications. #CommonPartsLibrary #Connector #TEConnectivity #AMPLIMITE #DSub #RightAngleConnector #PCBConnector #ThroughHole #WireToBoard #SignalConnector #ElectronicComponents #EmbeddedSystems

# SAM-M10Q-00B Engineering Specifications **General Description** The SAM-M10Q-00B is a compact, ultra-low-power Global Navigation Satellite System receiver module manufactured by u-blox. It is designed to provide highly accurate positioning, navigation, and timing information for battery-powered and space-constrained applications. Built on the u-blox M10 positioning platform, the module supports concurrent reception of multiple satellite constellations, enabling improved positioning accuracy, faster acquisition times, and enhanced reliability in challenging environments such as urban canyons and partially obstructed outdoor locations. Its optimized power architecture significantly reduces energy consumption while maintaining continuous navigation performance. The integrated antenna architecture and compact system-in-package design simplify hardware development by reducing external component requirements. The module is suitable for asset tracking, wearable devices, Internet of Things systems, industrial monitoring equipment, smart city infrastructure, agricultural applications, and portable navigation products. Designed for high-volume embedded applications, the SAM-M10Q-00B combines advanced GNSS technology, low power consumption, and robust positioning performance in a miniature surface-mount package. **Engineering Specifications** **Manufacturer:** u-blox **Manufacturer Part Number:** SAM-M10Q-00B **Component Type:** GNSS receiver module **Technology:** Multi-constellation satellite positioning receiver **GNSS Platform:** u-blox M10 positioning technology **Navigation Function:** Global positioning, navigation, and timing **Satellite Reception:** Concurrent multi-constellation GNSS tracking **Supported Systems:** GPS, Galileo, GLONASS, BeiDou and regional augmentation services **Receiver Architecture:** High-sensitivity GNSS receiver **Positioning Capability:** Real-time location tracking and navigation **Acquisition Performance:** Fast satellite acquisition and reacquisition **Tracking Performance:** Continuous satellite tracking under dynamic conditions **Position Accuracy:** High-precision navigation performance **Sensitivity:** Optimized for weak-signal environments **Power Consumption:** Ultra-low-power operation **Power Supply Configuration:** Single-supply operation **Data Interface:** Serial communication interface for host processor integration **Communication Protocols:** Standard GNSS navigation messaging support **Integrated Features:** Embedded antenna solution and RF front-end integration **Startup Modes:** Cold start, warm start and hot start operation **Timing Capability:** Precision timing and synchronization support **Interference Mitigation:** Advanced signal-processing algorithms for improved reception **System Integration:** Designed for compact embedded applications **Environmental Performance:** Reliable operation in outdoor and industrial environments **Operating Temperature Range:** Industrial temperature range **Package Type:** System-in-package GNSS module **Mounting Style:** Surface mount technology **Package Construction:** Compact low-profile module **Environmental Compliance:** RoHS compliant and lead-free **Reliability Features:** Designed for long-term embedded operation and high-volume production **Typical Applications** Asset tracking devices Internet of Things systems Wearable electronics Portable navigation equipment Fleet management systems Smart city infrastructure Industrial monitoring equipment Agricultural positioning systems Environmental data loggers Personal tracking devices Drone navigation systems Geolocation-enabled sensors Telematics systems Logistics and transportation tracking Battery-powered embedded products #SAMM10Q00B #SAMM10Q #uBlox #GNSS #GPSModule #SatelliteNavigation #PositioningSystem #IoT #AssetTracking #WearableTechnology #EmbeddedSystems #NavigationModule #Telematics #LocationTracking #ElectronicComponents #EngineeringSpecifications

Battery Retainer Coin, 24.5mm 1 Cell SMD (SMT) Tab BAT-HLD-006-SMT is a surface-mount coin-cell battery holder designed for secure retention of a single CR2450 lithium coin battery in compact PCB applications. Manufactured by TE Connectivity, it provides a low-profile, reliable power solution for embedded systems, wireless sensors, IoT devices, medical electronics, and backup power circuits. The holder features a horizontal battery orientation, phosphor bronze construction, and nickel-plated contacts for durability and dependable electrical performance. Key Features Supports one CR2450 coin-cell battery Surface-mount (SMT) PCB installation Horizontal battery orientation for low-profile designs Nickel-plated contacts for reliable conductivity and corrosion resistance Phosphor bronze construction for mechanical durability Maximum contact current rating of 1 A Compact design with approximately 6.88 mm height above PCB Suitable for automated assembly and reflow soldering processes Ideal for RTC backup, wireless modules, portable electronics, and IoT devices #BatteryHolder #CR2450 #CoinCellHolder #SMT #SurfaceMount #TEConnectivity #PowerManagement #EmbeddedSystems #IoT #PCBDesign #Electronics #BatteryRetainer #HardwareDesign #ElectronicComponents

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Plug Connector 24 Position Board Edge, Surface Mount; Through Hole, Right Angle Global Connector Technology (GCT) USB4155-03-C is a USB Type-C Plug Connector designed for USB 3.2 Gen 2 (USB 3.1 Gen 2 SuperSpeed+) high-speed data applications. It is a right-angle, horizontal SMT connector with a 24-contact configuration, suitable for PCB edge mounting. The connector supports high-speed signal transmission, power delivery, and durable mechanical connection for embedded systems, portable devices, and consumer electronics. Key Features: Connector Type: USB Type-C Plug Connector USB Standard: USB 3.2 Gen 2 / USB 3.1 Gen 2 SuperSpeed+ Number of Contacts: 24 positions Mounting Type: Surface Mount Technology (SMT), right-angle horizontal PCB mounting Data Transfer Rate: Supports high-speed USB 3.2 Gen 2 communication (up to 10 Gbps) Current Rating: Up to 5 A for power delivery applications Voltage Rating: Up to 48 VDC Durability: Rated for approximately 10,000 mating cycles Shielding: Metal shielded housing for EMI protection Contact Finish: Gold-plated contacts for reliable conductivity Operating Temperature: -30°C to +85°C Application: Embedded systems, laptops, tablets, mobile devices, storage devices, and USB-C interface boards Component Classification: Category: Connector / Interconnect Component Subcategory: USB Type-C Connector Not an IC or semiconductor component PCB Footprint Required: Yes Mechanical Part: No (it is an electromechanical connector with soldered electrical terminals) #CommonPartsLibrary #Connector #USBTypeC #USBConnector #USB32Gen2 #USB31Gen2 #SuperSpeedPlus #GCT #BoardMountConnector #SMTConnector #HighSpeedInterface #PCBDesign #ElectronicComponents #InterconnectTechnology