LM3671 3.3V Buck Converter Breakout - 3.3V Output 600mA Max. Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB power. This chip provides up to 600-mA load current across the entire input voltage range of 3.5 to 5.5V. Great for your portable project, we made this "pin compatible" with the LM1117-3.3V TO-220 chip so you can swap it in for better performance (90-95% efficiency!) There's also an ENable pin, tie it low to shut down the output completely.

Your microcontroller probably has an ADC (analog -> digital converter) but does it have a DAC (digital -> analog converter)??? Now it can! This breakout board features the easy-to-use MCP4725 12-bit DAC. Control it via I2C and send it the value you want it to output, and the VOUT pin will have it. Great for audio/analog projects, such as when you can't use PWM but need a sine wave or adjustable bias point. #Sublayout #DAC #ADC #MCP4725

The Seeed Studio RS-485 Breakout Board is a versatile RS-485 expansion designed for all Seeed Studio XIAO development boards. Equipped with the TP8485E transceiver IC, this breakout board efficiently converts UART serial streams to RS-485 signals. Operating as a half-duplex transceiver, the TP8485E enables unidirectional communication, spanning distances of up to 1200 meters. This breakout board is engineered for efficiency, consuming power from a single 5V or 12VDC power source. Its RS-485 output is facilitated through 3-pin terminals for both signal wires and power connections. These features collectively make it an ideal choice for robust data transmission across extensive distances and in challenging, high-noise environments.

Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. In particular, the simple resistor-set current limiting and auto-magic PWM support make it super easy to use with just about any brushed DC motor.

Adafruit I2S 3W Class D Amplifier Breakout - MAX98357A

This ePaper Breakout Board is designed for SeeedStudio XIAO series boards for allowing you driving ePaper display seamlessly. It also comes with a 8-pin 2.54 header for supporting additional microcontroller connections. Supporting plug and play, it is suitable for a wide range of ePaper displays.

Seeed Studio CAN Bus Breakout Board is an expansion board compatible with all XIAO development boards. The integration of the MCP2515 controller and SN65HVD230 transceiver chips on the expansion board ensures seamless and efficient communication over the CAN Bus.

SPH0645LM4H MEMS Omnidirectional Microphones Audio Evaluation Board #breakout-Board #Module

The 'must have' IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.

The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that's operational on the low side from 1.2V to 3.3V and on the high side from 1.8V to 5.5V. Simply apply your low and high-side reference voltages to the VREF1 and VREF2 respectively, connect your I/O and drive the Enable pin high to open bidirectional voltage translation without the use of a direction pin!

NXP Precision 9DoF breakout combines two of the best motion sensors we've tested here at Adafruit: The FXOS8700 3-Axis accelerometer and magnetometer, and the FXAS21002 3-axis gyroscope

This is a breakout board for our Blackberry Trackball. The four spindles on the trackball have a tiny circular magnet the end; each of these are paired with an SMD hall effect sensor, which are used to measure up, down, left and right movements of the trackball. An SMD momentary switch is placed under the trackball to give you a select switch. The BTN line will be pulled low when the switch is pressed. #Module

Now mounted on a breakout board, the MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10µA at one measurement per second. #Sublayout #BarometricPressureSensor #module

USB to serial chip CH340

My version/layout of MT3608 DC-DC Step Up Converter Booster for my Lipo Charger Arduino Shield

Adafruit Product

BNO085 - Accelerometer, Gyroscope, Magnetometer, 3 Axis Sensor Evaluation Board The BNO085 Evaluation Board is a development platform designed to evaluate and prototype applications using the BNO085 9-axis Inertial Measurement Unit (IMU). It integrates a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer with an onboard ARM Cortex-M0+ processor running advanced sensor fusion algorithms. The board provides accurate real-time orientation, motion tracking, rotation vectors, and heading information while offloading complex sensor fusion calculations from the host microcontroller. It is widely used in robotics, AR/VR systems, drones, motion tracking devices, navigation systems, and IoT applications. The evaluation board typically supports I²C, SPI, and UART communication interfaces, enabling easy integration with various embedded platforms. Key Features 9-DOF motion sensing with integrated accelerometer, gyroscope, and magnetometer Built-in ARM Cortex-M0+ processor for onboard sensor fusion Real-time orientation output including quaternions, Euler angles, and rotation vectors Supports I²C, SPI, and UART communication interfaces High-speed motion tracking with low latency operation Dynamic calibration for improved accuracy and stability Integrated motion detection features such as step counting and activity tracking Configurable sensor data rates and timestamped sensor reports Low-power operation suitable for battery-powered applications Ideal for robotics, VR/AR, wearable devices, navigation, and industrial motion sensing #BNO085 #IMU #9DOF #SensorFusion #MotionTracking #OrientationSensor #Robotics #EmbeddedSystems #IoT #WearableTech #ARVR #Navigation #EvaluationBoard #Accelerometer #Gyroscope #Magnetometer #commonpartslibrary #developmentboard #accelerometer

STM32 Blue Pill is a high-performance, breadboard friendly development board with loads of features in a small form factor. #stm32 #f103 #arduino

74HC4067 Analog and Digital Switch Interface Evaluation Board #74HC4067 #part #SparkFun #MUX

FRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that's quilted handbags. But FRAM is pretty damn cool too! It's similar to Dynamic random-access memory, only with a ferroelectric layer instead of a dielectric layer. This gives it stable handling (the bytes you write are non-volatile) with dynamic responsiveness (you can write them very fast!)