Humidity, Temperature 0 ~ 100% RH I2C ±2% RH 8 s Surface Mount The SHTC3-TR-2.5KS is a digital humidity and temperature sensor from Sensirion, designed for high accuracy, low power consumption, and compact integration. It utilizes a fully calibrated capacitive humidity sensor and bandgap temperature sensor, providing precise environmental measurements via an I²C interface. The device is optimized for battery-powered and space-constrained applications, featuring ultra-low power consumption and sleep modes, making it ideal for IoT, wearable, and mobile devices. Key Features Relative humidity and temperature sensing in a single package Fully calibrated and linearized digital output I²C interface (up to 1 MHz fast mode) Ultra-low power consumption with sleep mode High accuracy and fast response time Small DFN package for compact designs Factory calibrated, no external calibration required Mechanical Characteristics Package Type: DFN (Dual Flat No-Lead) Package Size: ~2.0 mm × 2.0 mm × 0.75 mm Mounting Type: Surface mount (SMT) Terminals: Bottom pads Electrical Characteristics Supply Voltage (VDD): 1.62 V to 3.6 V Average Supply Current: Measurement: ~170 µA Sleep Mode: ~0.3 µA Interface: I²C (address selectable) Output: Digital (temperature and relative humidity) Sensing Performance Humidity Range: 0 to 100 %RH Humidity Accuracy: ±2 %RH (typical) Temperature Range: -40°C to +125°C Temperature Accuracy: ±0.2°C (typical) Response Time (τ63%): ~8 seconds (humidity) Functional Features Low-power measurement modes (normal and low power) Sleep mode for minimal energy consumption CRC checksum for data integrity Clock stretching support (optional) Environmental Specifications Operating Temperature Range: -40°C to +125°C Storage Temperature Range: -40°C to +125°C Packaging Information Packaging Type: Tape & Reel (TR) Reel Quantity: 2,500 units (2.5KS) Lead-Free / RoHS compliant Typical Applications Wearable devices Smartphones and mobile electronics IoT sensors and nodes Smart home devices (thermostats, air quality monitors) HVAC systems Environmental monitoring #CommonPartsLibrary #Sensor #Transducer #Humidity #Moisture-Sensor

Temperature Sensor Digital, Local -40°C ~ 125°C 11 b SOT-563 #commonpartslibrary #sensor #transducer #digital

External Input Sensor Amplifier LOAD CELL AMP HX711 #commonpartslibrary #sensor #transducer #amplifier #loadcellamp

Buzzers Transducer, Externally Driven Magnetic 5 V 150mA 4kHz 100dB @ 5V, 10cm Surface Mount Solder Pads #commonpartslibrary #audio #buzzer

Remote Receiver Sensor 38.0kHz 45m Through Hole #CommonPartsLibrary #Sensor #Transducer #optical #Photo-Detector #Remote-receiver

Remote Receiver Sensor 38.0kHz 45m Through Hole This IR receiver series is optimized for long burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code compatibility. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These components have not been qualified to automotive specifications. Individual IC settings to reach maximum performance • Immunity against noise (lamps, LCD TV, Wi-Fi) • Low supply current • Photo detector and preamplifier in one package • Supply voltage: 2.0 V to 5.5 V VS1838B #CommonPartsLibrary #Sensor #Transducer #Optical-Sensor #Photo-Detectors #Remote-Receiver #TSOP38238

Photodiode 940nm 40° Radial #CommonPartsLibrary #Sensor #Transducer #Optical #Photodiode #BPV10

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #commonpartslibrary #sensor #transducer #accelerometer

Gas, Humidity, Pressure, Temperature Sensor I²C, SPI Output #commonpartslibrary #sensor #transducer

Humidity, Temperature 0 ~ 100% RH I2C ±1% RH 4 s Surface Mount #CommonPartsLibrary #sensor #SHT4x #Transducer #Moisture Sensors

Temperature Sensor Digital, Infrared (IR) -40°C ~ 85°C 16 b TO-39 #CommonPartsLibrary #Sensor #Transducer #Temperature-sensor #MLX90614

Digital Switch Omnipolar Switch Push-Pull Hall Effect SOT-23-3 #CommonPartsLibrary #Sensor #Transducer #Magnetic

Reflective Optical Sensor 0.591" (15mm) PCB Mount #commonpartslibrary #sensor #transducer #optical #analogoutput

High Accuracy Ambient Light Sensor with I2C Interface Optical Sensor Ambient 545nm I2C 4-SMD, J-Lead #CommonPartsLibrary #sensor #Transducer #Optical-Sensor #Ambient-Light #IR #UV-Sensor #VEML7700

Buzzers Transducer, Externally Driven Piezo 5 V 5mA 4kHz 81dB @ 5V, 10cm Surface Mount Solder Pads #commonpartslibrary #audio #buzzer