3 Position Wire to Board Terminal Block Horizontal with Board 0.200" Screw terminal 3-pin 5.08mm Through Hole #connector #terminalblock #tht

2 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.200" (5.08mm) 90°, Right Angle Through Hole Phoenix Contact MSTBA 2.5/ 2-G-5.08 CAN connector terminal block 2 pin The component is a two-position pluggable terminal block header designed for secure and reliable wire-to-board connections in industrial and embedded electronic systems. It is part of the COMBICON MSTB family, widely used for field wiring applications such as CAN bus, RS485, and power distribution. The device provides a robust interface between PCB circuitry and external wiring, supporting easy installation, maintenance, and replacement through a pluggable connection system. Mechanical Characteristics Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole PCB mount Orientation: Vertical (straight) Termination Style: Pin header for mating plug connector Housing Material: Polyamide (PA), high-temperature resistant Color: Green Electrical Characteristics Rated Voltage: Up to 250 V Rated Current: Up to 12 A Contact Material: Copper alloy Contact Plating: Tin plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94 V-0 Mating and Compatibility Compatible Plug Series: Phoenix Contact MSTB 2,5 series (e.g., 1757019) Connection Method (Plug Side): Screw clamp termination Wire Size Range: Typically accepts 24 AWG to 12 AWG (depending on mating plug) Standards and Compliance RoHS: Compliant UL Recognized: Yes IEC Compliance: Yes Application Notes The component is commonly used in industrial communication systems such as CAN bus networks where a reliable and removable connection is required for CANH and CANL signals. Its 5.08 mm pitch ensures adequate spacing for signal integrity and ease of wiring, while the pluggable design simplifies field servicing and module replacement. #connector #tht #terminalblock

JST PH Connector Header Through Hole, Right Angle 2 position 0.079" (2.00mm) #commonpartslibrary #connector #terminalblock #tht #JST-PH

PCB terminal block; pitch 3.5mm; 2-ways; oblique entry; range wire 0.2-2.5mm2 (AWG 26-16) The DG250-3.5-02P-11-00A(H) is a 2-position PCB terminal block connector designed for secure wire-to-board connections. It uses a spring clamp (push-in) mechanism, allowing easy wire insertion and reliable electrical contact without screws. This connector is commonly used in: Power input terminals Signal wiring interfaces Industrial and embedded PCB applications It features a 3.5 mm pitch and a 45° angled entry, making it suitable for compact PCB layouts where space and cable routing are critical. Key Features Electrical Characteristics Rated Voltage: up to 400V Rated Current: up to 5A Mechanical & Connection Number of Pins: 2 (1×2 configuration) Pitch: 3.5 mm Mounting Type: Through-hole (THT) Wire Connection: Spring clamp / push button type No screwdriver required Wire Size: ~22–16 AWG (0.2–1.5 mm²) Physical Design Orientation: 45° angled (easier cable routing) Compact size: suitable for dense PCB layouts Body Material: Polyamide (PA66) Flammability Rating: UL94V-0 (fire-resistant) Contact & Reliability Contact Material: Phosphor bronze Plating: Tin-plated (good conductivity + corrosion resistance) Operating Temperature: −40 °C to +105 °C #commonpartslibrary #connector #terminalblock #tht

4 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole #commonpartslibrary #connector #terminalblock #tht

2 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole screw terminal 2 pin 3.5mm This component is a printed circuit board mounted screw terminal block designed to provide a secure and serviceable wire-to-board connection. It accommodates two conductors and uses a screw clamp mechanism to ensure reliable electrical and mechanical contact. The compact 3.5 mm pitch makes it suitable for space-constrained designs while maintaining adequate creepage and clearance distances for low-voltage applications. The terminal is intended for through-hole mounting and supports field wiring without the need for specialized tools, making it appropriate for industrial control systems, power distribution modules, and general-purpose electronic assemblies. Mechanical Characteristics: The terminal block is constructed with a high-temperature thermoplastic housing that provides mechanical strength and electrical insulation. The housing is typically green in color and designed for side-entry wire insertion. The clamping system uses metal screws and pressure plates to secure stripped wire ends. The component is designed for through-hole PCB mounting with soldered pins providing structural stability. The form factor supports modular placement along the PCB edge for accessible wiring. Electrical Characteristics: The device is designed for low to moderate voltage and current applications typical of signal and power connections in control electronics. Conductive elements are made from metal alloys with appropriate plating to ensure good conductivity and resistance to corrosion. The screw clamp connection provides stable contact resistance under vibration and thermal cycling conditions. Material and Environmental Characteristics: The insulating body is made from flame-retardant thermoplastic material compliant with relevant safety standards. The component is suitable for standard operating temperature ranges encountered in industrial and commercial electronics. Materials are selected to meet common environmental and regulatory requirements such as RoHS compliance. Application Considerations: This terminal block is intended for applications requiring reliable field wiring connections, ease of maintenance, and secure termination. It is commonly used in power supplies, control panels, interface modules, and embedded systems. Proper PCB footprint design and adherence to recommended soldering practices are required to ensure optimal performance and reliability. #CommonPartsLibrary #Connector #Terminal-Block #WR-TBL Series 1377

2 Position Wire to Board Terminal Block Through Hole 5.08mm #CommonPartsLibrary #Connector #Terminal-block

6 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #commonpartslibrary #connector #terminalblock

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" Screw Terminal 3-pin 5.08mm Through Hole #CommonPartsLibrary #Connector #Terminal-block #COMBICON MKDSN

2 Position Wire to Board Terminal Block Horizontal with Board 0.100" (2.54mm) Through Hole 1725656 – PCB-mounted screw terminal block designed for secure wire-to-board connections in industrial, control, automation, instrumentation, and power distribution applications. Features a screw-clamp termination system that provides reliable electrical contact and strong wire retention under vibration and demanding operating conditions. The through-hole construction offers enhanced mechanical stability, making it suitable for long-term field installations and high-reliability electronic assemblies. Designed to simplify wiring, maintenance, and system integration while ensuring dependable signal and power connectivity. #TerminalBlock #ScrewTerminal #WireToBoard #IndustrialElectronics #PowerDistribution #AutomationSystems #ControlPanels #ThroughHoleConnector #PCBConnector #ReliableConnectivity #connector #Terminalblock #tht

4 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole 691137710004 is a 4-position wire-to-board terminal block from the WR-TBL Series 1377 by Würth Elektronik. It features a horizontal side-entry design with a 5.00 mm pitch and through-hole PCB mounting, making it suitable for industrial controls, power distribution, automation equipment, and general-purpose PCB wire connections. The pressure-clamp screw terminal design provides secure wire retention and reliable electrical performance. Key Features 4-position wire-to-board terminal block 5.00 mm pitch spacing Horizontal (side-entry) wire connection Through-hole PCB mounting Pressure-clamp screw termination with wire guard Supports 12–30 AWG wire sizes Rated for up to 16 A current Rated for up to 300 V Operating temperature range: -30°C to +120°C Polycarbonate (PC) housing for durability Copper alloy contacts with nickel plating M2.5 screw thread with 0.4 Nm recommended tightening torque Green housing color for standard industrial identification #TerminalBlock #WireToBoard #WurthElektronik #PCBConnector #ScrewTerminal #IndustrialConnector #ThroughHole #WRTBL #PowerConnection #ElectronicsDesign #commonpartslibrary #connector #terminalblock

8 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole #commonpartslibrary #connector #terminalblock

2 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.150" (3.81mm) Through Hole, Kinked Pin #commonpartslibrary #connector #terminalblock