ESP32 Multimodal Health Monitor with Pulse Oximetry, ECG, and Barometric Sensing

The Texas Instruments MSP430FR604x and MSP430FR603x family comprises highly integrated ultrasonic sensing and measurement system-on-chips (SoCs) designed specifically for water and heat metering applications. The featured components, including MSP430FR6047, MSP430FR60471, MSP430FR6045, MSP430FR6037, MSP430FR60371, and MSP430FR6035, deliver best-in-class ultrasonic water flow measurement with ultra-low power consumption. These microcontrollers excel with an active mode current consumption of approximately 120 µA/MHz and a standby mode power draw as low as 450 nA with a real-time clock (RTC) enabled. Key functionalities include a high-precision differential time-of-flight (dTOF) accuracy of less than 25 ps, integrated analog front-end, programmable pulse generation (PPG), and an analog comparator. They also interface directly with standard ultrasonic sensors up to 2.5 MHz and feature up to 256KB FRAM, robust RAM options, and integrated LCD drivers for up to 264 segments. The embedded low-energy accelerator (LEA) enhances digital signal processing capabilities, making these components ideal for battery-powered metering solutions. Peripherals include multiple enhanced serial communication interfaces, high-performance ADCs, DMA controllers, and a suite of timers and encryption modules. These features combine to offer a powerful solution for high-accuracy, low-cost, and ultra-low-power metering applications.

Welcome to your new project. Imagine what you can build here.

A compact battery-powered door/window sensor built around the ESP32-C3-MINI-1-N4 module. The design uses a single non-rechargeable AA cell with a TPS613221A 3.3 V boost regulator, reed switch magnetic contact sensing, low-power wake/report/sleep firmware strategy, RGB status LED for setup feedback, BOOT/EN controls, programming header, and input polarity protection. It is intended for smart-home security and automation applications, supporting WiFi or Bluetooth LE hub reporting with emphasis on low idle current, reliable RF burst power delivery, and field-replaceable battery operation. #ESP32-C3 #BLE #WiFi #DoorSensor #WindowSensor #ReedSwitch #LowPower #BatteryPowered #SmartHome #IoT

Portable sensing device

All-in-One IoT development board based on ESP32-WROOM-32U optimized for remote sensing and datalogging

Plant monitoring HAT for Raspberry Pi 4 model B with light intensity, temperature, humidity, CO2 sensing, and camera attachment

Controller board for a dental suction vacuum pump system using a 24 V low-voltage control board, VFD motor drive interface, 4–20 mA vacuum sensing, float/temperature safety inputs, solenoid flush output, alarm output, and local display.

Professional-grade ultra-low-power 52 mm circular BLE smartwatch PCB with biomedical sensing, AMOLED display, USB-C charging, and 6-layer RF/mixed-signal layout constraints.

Panel-connected home energy monitor with non-invasive branch current sensing, whole-home power measurement, and smart outlet/switch integration for appliance-level energy visibility.

Low-power USB-C 5V environmental sensor node with ESP32-S3 WiFi/BLE, digital temperature/humidity sensing, protected 5V input path, and 3.3V regulation.

Dual-node 500 kbps CAN wheel speed sensing and DAQ system with STM32G431, protected automotive power, sensor and DAQ peripherals

This project aims to design and develop a modular monitoring system for a LiC supercapacitor array, incorporating PCBs A and B for voltage sensing on either side of the array, and PCB C for central control. PCBs A and B will measure cell voltages, communicate data via I2C, and feature activity/status LEDs, powered directly from the array. PCB C will aggregate data, managing over/under voltage, overcurrent, and balancing. The goal is a compact, efficient solution to ensure the array's safety and longevity.

The LTC3109 from Linear Technology is a highly integrated DC/DC converter specifically designed for energy harvesting applications. It can operate from ultra-low input voltages as low as 30mV, utilizing a unique, proprietary auto-polarity architecture to function regardless of input polarity. The component is ideal for harvesting energy from thermoelectric generators (TEGs) and thermopiles, efficiently converting this energy to power remote sensors, wireless transmitters, and low-power devices. Key features include selectable output voltages of 2.35V, 3.3V, 4.1V, or 5V, a 2.2V low-dropout (LDO) regulator, a logic-controlled output, and an energy storage system to maintain operation during power interruptions. The LTC3109 is encapsulated in a small, 20-lead (4mm × 4mm) QFN or SSOP package, making it compact and suitable for space-constrained applications in HVAC systems, building automation, and industrial wireless sensing. Additionally, the power good indicator and the ability to use compact step-up transformers further enhance its suitability for low power, energy-harvesting systems.

The Coffee Waker is a unique, full-featured coffee maker alarm clock designed to brighten your morning routine with the irresistible aroma of freshly brewed coffee. By seamlessly integrating multiple high-performance components onto a single main board, the Coffee Waker delivers both functionality and innovation: - **Processing & Connectivity:** Powered by an ESP32-S3, it offers built-in WiFi and Bluetooth, enabling smart scheduling, remote control, and over-the-air updates. - **Precision Sensing:** A 16-bit load cell ADC provides accurate measurements, ensuring precise weight sensing for coffee bean dosing or liquid volume monitoring. - **Quality Audio Output:** The onboard 16-bit MP3 DAC guarantees clear audio playback, from alarm sounds to any custom wake-up messages you program. - **Robust Power Handling:** With a 120V heater cartridge relay and a 12V wakeup light converter integrated, the board safely manages high voltage switching and provides a visually soothing light routine. - **Thoughtful Integration:** Designed with automotive-grade components, precision regulators, and careful signal routing, the Coffee Waker Main Board combines performance with reliability while keeping a compact footprint. Overall, the Coffee Waker transcends the ordinary alarm clock, merging daily utility with modern connectivity and a touch of luxury—making it the perfect addition to any nightstand. #CoffeeWaker #SmartHome #CoffeeMaker #AlarmClock #MorningRoutine #Technology #Innovation

RPI Compute Hat. 2 displays, CAN, Radio and proximity sensing

ESP32-S3 carrier board with USB-C 5V power, BNO085 IMU support, GPS module interface, temperature sensing, and a single brushed DC motor driver carrier interface.

3.3 V-powered pH and ORP probe interface using an ADS1115 module, MCP6002 through-hole buffers, and DS18B20 temperature sensing. External ESP32 connection is through one 5-pin header carrying 3V3, GND, SDA, SCL, and DQ; ADS1115 ADDR is fixed locally and ALERT is unused.

Single-cell Li-ion/Li-polymer charger and NVDC power-path reference design based on the TI BQ25606RGER, with input and charge-current programming, battery temperature sensing, and status indication.

USB-C powered consumer environmental sensor node with ESP32-class Wi‑Fi/Bluetooth, digital temperature/humidity sensing, protected 5 V input, and 3.3 V low-power electronics.

Battery-powered ESP32-S3 LoRa ePaper sensor board with SHT41 environmental sensing, LiPo charging/fuel gauge, 5V input detection, and a 4.2 inch 300x400 b&w ePaper interface in an 85 x 60 mm low-profile PCB.

USB-C powered dashboard-mounted digital compass with three retro-orange 7-segment displays, magnetic compass sensing, and a brightness/off knob for an FJ cab installation.

Microcontroller-based ozone generator control board for 12 V or 24 V DC input, drawing roughly 3.5 A at 12 V or 1.8 A at 24 V, with matched VIN-powered field devices, protected input, regulation, ATMEGA328PB control, pressure/flow sensing, MOSFET-switched load outputs, programming/debug headers, and status indicators.

4-layer ESP32-S3 controller for a dual V-mount battery-powered film fog generator with 200 W heater PWM, pump/fan outputs, K-type thermocouple sensing, battery monitoring, and DMX-512 control.

Ultra-compact 30 mm × 22 mm, 4-layer wearable sports tracker using Nordic nRF5340 BLE 5.4, motion/environment/optical/GPS sensing, external U.FL antennas, 250 mAh LiPo battery, Qi wireless charging only, and sub-50 µA target sleep current.