Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345-EP is an extended performance version of the ADXL345, which is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2 C digital interface. The ADXL345-EP is well suited for extended temperature range industrial and aerospace equipment. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Freefall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345-EP is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, enhanced plastic package. Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) Power consumption scales automatically with bandwidth User-selectable resolution from 10 to 13 bits 4 mg/LSB scale factor in all g ranges 32-sample FIFO minimizes host processor load Single tap, double tap, and free-fall detection Activity/inactivity monitoring Supply voltage range: 2.0 V to 3.6 V I/O voltage range: 1.7 V to VS SPI (3- and 4-wire) and I2C digital interfaces Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command 10,000 g shock survival Pb free/RoHS compliant #commonpartslibrary #integratedcircuit #accelerometer

Mid-Range Relays, 2 Form C, DPDT, 2 C/O, Coil Suppression Diode, Gold Terminal Plating, 5 A, 28 VDC Coil Voltage, CII FCB-205 Series The M83536/2-024M is a hermetically sealed electromechanical power relay built to comply with the MIL-PRF-83536 military specification family, a standard governing high-reliability relays intended for use in demanding military, aerospace, and defense electronic systems. Devices manufactured under this specification series are designed to meet stringent requirements for mechanical ruggedness, electrical performance consistency, and long-term reliability under the extreme vibration, shock, temperature cycling, and altitude conditions typically encountered in airborne, shipboard, and ground military platforms. This relay is configured as a double-pole, double-throw switching device, meaning it provides two independently switched sets of contacts that can each connect to one of two possible circuit paths, controlled by a single energized coil. This configuration is commonly used in applications requiring simultaneous switching of two separate circuits, such as redundant power path switching, dual-channel signal routing, or coordinated control of multiple subsystems from a single control signal. The relay operates on momentary, non-latching actuation, meaning the contacts return to their de-energized state as soon as coil power is removed, rather than remaining in their last-commanded position. The coil is designed for direct-current control voltage typical of military and aerospace 28-volt electrical systems, a standard power bus voltage used extensively in aircraft, military vehicles, and shipboard electrical systems. The device's flange-style mounting construction allows it to be securely fastened to a chassis or panel, providing the mechanical stability needed to maintain reliable contact performance under the sustained vibration and shock loading common in military platform environments. Internal contact construction uses a silver-cadmium-oxide contact material, chosen for its strong arc-resistance and resistance to contact welding under repeated switching of inductive or resistive loads. As a hermetically sealed device manufactured to a formal military specification, the relay undergoes rigorous qualification and lot-acceptance testing to verify long-term mechanical and electrical performance, including extended life-cycle switching tests, vibration and shock qualification, and environmental exposure testing. This makes the part suitable for use in flight-critical, mission-critical, or other high-reliability electromechanical switching applications where field failure is not an acceptable risk. The relay is supplied with through-hole solder-pin terminations for both coil and contact connections, supporting traditional through-hole assembly methods consistent with the conservative, well-proven manufacturing processes favored in military and aerospace hardware production. Spec Sheet Identification Part Number: M83536/2-024M Specification Family: MIL-PRF-83536 Manufacturer: TE Connectivity (CII) Functional Classification Device Type: Electromechanical power/signal relay Contact Configuration: Double-pole, double-throw (DPDT) Actuation Type: Momentary, non-latching Coil Input Type: DC control Electrical Characteristics Coil Voltage: Military-standard 28V DC class Coil Resistance: Moderate coil resistance class Contact Rating: Mid-range current switching class Contact Voltage Rating: Compatible with 28V DC and standard AC switching voltages Output Type: AC/DC switching capable Contact & Construction Details Contact Material: Silver-cadmium-oxide (AgCdO) Contact Form: 2 Form C (DPDT, normally open/normally closed) Sealing: Hermetically sealed construction Mounting Style: Flange mount, through-hole Environmental & Qualification Specification Compliance: MIL-PRF-83536 military relay specification Application Class: Military and aerospace electromechanical switching Export Classification: EAR99 export control classification RoHS Compliance: Yes Mechanical Specifications Termination: Solder pin, through-hole Mounting Type: Through-hole, flange-mounted Build Style: Mid-range relay form factor consistent with the M83536 family Packaging Supply Format: Individually packaged per military relay handling and ESD protection standards #M83536 #TEConnectivity #MilitaryRelay #AerospaceRelay #MILPRF83536 #DPDTRelay #ElectromechanicalRelay #HermeticallySealed #PowerRelay #SignalRelay #DefenseElectronics #AviationElectronics #FlangeMount #ThroughHole #MilAeroComponent #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #HighReliabilityRelay

Isolated Module DC DC Converter 1 Output 12V 13.4A 9V - 50V Input DCM3623T50T13A6T70 is a high-density, isolated, and regulated DC-DC converter module from Vicor, designed to efficiently convert a wide input voltage range into a stable 12V output. Utilizing Vicor's advanced ChiP™ packaging technology and Zero Voltage Switching (ZVS) topology, it delivers high efficiency, excellent thermal performance, and robust protection features, making it suitable for industrial, transportation, aerospace, and distributed power applications. Key Features Wide input voltage range: 9V to 50V DC Regulated 12V DC output Maximum output power: 160W Continuous output current up to 13.4A High efficiency up to 91.5% 2250V DC isolation between input and output High-frequency Zero Voltage Switching (ZVS) topology Integrated protections: Over-Voltage Protection (OVP) Over-Current Protection (OCP) Under-Voltage Lockout (UVLO) Short-Circuit Protection (SCP) Over-Temperature Protection (OTP) Compact 3623 Through-Hole ChiP® package Operating temperature range: -40°C to +125°C Suitable for industrial, process control, transportation, defense, and aerospace systems. #DCDCConverter #Vicor #PowerModule #IsolatedConverter #PowerElectronics #IndustrialAutomation #EmbeddedSystems #TransportationElectronics #AerospaceElectronics #HighEfficiencyPower #ChiPTechnology #DCM3623

Connector Header Through Hole, Right Angle 50 position 0.049" (1.25mm) The G125-MH15005L7P is a 50-position, dual-row (2×25) male header connector with a 1.25 mm pitch, intended for board-to-board, cable-to-board, or wire-to-board connections. It features a right-angle through-hole (THT) mounting style, making it suitable for compact PCB layouts requiring horizontal mating. This connector belongs to Harwin’s Gecko (G125) series, known for high reliability, vibration resistance, and compact size, often used in aerospace, industrial, and rugged embedded systems. Key Features Connector Type: Rectangular header, male pin Number of Positions: 50 (2 rows × 25) Pitch: 1.25 mm Mounting Type: Through-hole, right-angle (horizontal) Series: Gecko (high-reliability connector family) Current Rating: ~2 A per contact Voltage Rating: up to 250 V Contact Material: Phosphor bronze with gold plating Locking Mechanism: Latch-type retention Operating Temperature: approx. −65 °C to +150 °C Design Characteristics Compact high-density layout (1.25 mm pitch) for space-saving designs Shrouded housing for protection and correct mating alignment Gold-plated contacts for reliable signal integrity and corrosion resistance High vibration tolerance, suitable for harsh environments Latch or retention system ensures secure connection under mechanical stress

Linear Voltage Regulators Radiation-hardness-assured (RHA), 4.2-V to 60-V, Output current of 500mA adjustable output linear regulator 16-CFP -55 to 125ºC Intended mainly for: Satellite electrical power system • Radiation-hardened component • Space or Aerospace grade Other part number for this component is 5962R0722962VZA

Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset • Space or Aerospace grade #commonpartslibrary #integratedcircuit #flipflop

15 Position D-Sub Plug, Male Pins Connector The 88615-5005 is a D-subminiature connector manufactured by 3M, configured as a plug-style connector with male pin contacts. D-subminiature connectors, commonly known as D-Sub connectors, are among the most widely used and longest-standing rectangular connector standards in the electronics industry, recognized by their characteristic trapezoidal metal shell that provides a self-aligning, polarized mating interface and a degree of mechanical shielding for the contacts housed within. This particular connector is built around a defined male pin contact arrangement housed within the standard D-shaped metal shell, which serves to guide correct mating alignment with its corresponding female socket connector counterpart while also helping to reduce the risk of bent or damaged pins during the mating process. As a plug-style device with pin contacts, this connector is typically mounted on a cable assembly, panel, or enclosure and is intended to mate with a female D-Sub receptacle mounted on a printed circuit board, another cable assembly, or an equipment panel, forming a complete signal or low-power interconnect path between two systems or subsystems. D-Sub connectors of this style have long been used across an extremely broad range of applications, including legacy computer peripheral interfaces, industrial control systems, test and measurement equipment, instrumentation racks, and many other applications requiring a rugged, field-serviceable, and widely interoperable multi-pin connection. Their enduring popularity stems from the connector family's mechanical robustness, ease of hand assembly and field termination, broad availability of compatible mating hardware such as backshells and hoods, and long-established presence in legacy and ruggedized electronic system designs across commercial, industrial, and aerospace sectors. 3M's D-Sub connector assemblies in this product family are typically constructed using a metal or metal-plated shell to provide mechanical strength and a degree of electromagnetic shielding, paired with an insulating housing that holds the individual pin contacts in precise alignment. The pin contacts themselves are typically machined or stamped from a conductive alloy and plated to ensure low-resistance, corrosion-resistant electrical contact across the connector's service life. As is typical for connectors in this product class, the device is intended for general-purpose signal and low-power interconnection rather than high-speed digital or high-current power transmission, making it well suited to control signal routing, instrumentation wiring, and other moderate-density interconnect applications. Spec Sheet Identification Part Number: 88615-5005 Connector Family: D-Sub Connector Assemblies Manufacturer: 3M Connector Type / Configuration Type: D-Subminiature connector Gender: Plug, male pin contacts Contact Style: Male pins Shell Style: Standard D-shaped trapezoidal metal shell Mechanical Specifications Mounting Style: Cable-mount or panel-mount plug configuration Mating Interface: Standard D-Sub polarized shell, self-aligning Contact Material: Conductive alloy pin contacts, plated for corrosion resistance and low contact resistance Application Context Typical Use: General-purpose signal and low-power interconnection Common Applications: Industrial control systems, instrumentation, test and measurement equipment, legacy peripheral interfaces, panel and rack wiring Compatibility Mates With: Corresponding D-Sub female socket receptacle connector Accessory Compatibility: Compatible with standard D-Sub backshells, hoods, and jackscrew hardware Environmental & Qualification Construction Class: General-purpose connector construction typical of the D-Sub product family RoHS Compliance: Per 3M product documentation for this series Packaging Supply Format: Standard connector packaging per 3M distribution practices #88615 #3M #DSubConnector #DSubminiature #ConnectorAssembly #MalePinConnector #PlugConnector #SignalConnector #IndustrialConnector #InstrumentationConnector #PanelMount #CableAssembly #RectangularConnector #ElectronicComponents #PCBDesign #HardwareEngineering #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #ConnectorDatasheet

Space-enhanced-product, quad, 40-V 4.5-MHz rail-to-rail input and output operational amplifier • Radiation hardened • Space nor aerospace grade #commonpartslibrary #integratedcircuit #opamp #amplifier

Connector Header Through Hole 12 position 0.079" (2.00mm) M80-5T11242MC is a high-reliability, 12-position (6+6) double-row male PCB connector from the Harwin Datamate J-Tek series. Designed for harsh-environment and mission-critical applications, it features a 2.00 mm pitch, vertical through-hole mounting, and Harwin's 101Lok retention system for secure mating. The connector is commonly used in aerospace, defense, robotics, industrial control, and other applications where vibration and shock resistance are essential. Key Features 12 contacts (6+6) in a double-row configuration 2.00 mm contact pitch Vertical through-hole PCB mounting 101Lok push-turn locking mechanism for secure retention Gold-plated contact area for excellent conductivity and corrosion resistance Tin-plated terminations for reliable soldering Phosphor bronze contacts for durability PPS (Polyphenylene Sulfide) housing with UL94V-0 flammability rating Polarized design prevents incorrect mating Operating temperature range: -55°C to +125°C Suitable for high-vibration and high-shock environments RoHS compliant Applications Aerospace and avionics Defense and military systems Robotics and automation Industrial control equipment Motorsport electronics Space and satellite systems #Harwin #Datamate #JTek #M805T11242MC #HighReliabilityConnector #BoardToBoardConnector #ThroughHoleConnector #IndustrialElectronics #AerospaceElectronics #Robotics #DefenseElectronics #EmbeddedSystems #PCBConnector #101Lok #ConnectorDesign

225k ~ 1.4M Modem PSK 32-QFN (5x5) The DCB1M is a device for multiplex communication over noisy power lines, at speed up to 1.4Mbit/s. The DCB1M is based on the DC-BUS™ technology for network communication between modules sharing a common DC or AC powerline. The device avoids complex cabling, saves weight, and simplifies installation. The DCB1M supports UART, SPI, DMX512, RDM, and I 2C protocols, enabling the user to meet this application protocol. Sleep mode allows low power consumption when the device is not used. A QFN32 5x5 mm package provides a small PCB footprint The DCB1M is beneficial for many applications ranging from LED, Aerospace, Automotive, Industrial, and even Toys. Features • Noise robust UART, SPI, DMX512, RDM, and I2C transceiver over DC powerline. • Bitrate up to 1.4Mbit/s over the powerline. • Multiple networks may operate over a single powerline. • 251 selectable carrier frequencies (5MHz to 30MHz). • Built-in CSMA/CA (powerline arbitration) mechanism. • Operates as Multi-master Transceiver in a multiplex network. • Channel interference detection. • Communicates over a wide range of DC voltages. • Power management (Sleep modes) for low power consumption.

Metallic Case - 1 500 VDC Isolation, Hi-Rel DC-DC Converter The MGDS-04-J-C/M/S is a high-reliability 4 W isolated DC-DC converter module designed for demanding industrial, transportation, military, and aerospace applications. It belongs to the MGDS-04 series and features a 16–40 VDC input range (J input code), a regulated 5 VDC single output (C output code), and galvanic isolation between the input and output. The /S suffix indicates that the module undergoes screening and serialization for enhanced reliability and traceability, making it suitable for mission-critical systems. Key Features 4 W isolated DC-DC converter Wide 16–40 VDC input voltage range Regulated 5 VDC single output High-efficiency power conversion Input-to-output galvanic isolation Designed for industrial, defense, aerospace, and transportation applications Built-in protection features (including short-circuit protection) Compact encapsulated module for PCB mounting /S option provides screening and serialization for improved quality assurance and traceability #DCDCConverter #PowerModule #IsolatedPower #IndustrialElectronics #Aerospace #MilitaryElectronics #EmbeddedSystems #PowerSupply #HighReliability #PCBDesign

2A EMI Filter Module 9 to 50 VDC Input Range MIL-STD-461C/D/E/F & DO-160C/D/E/F/G Compliant The FGDS-2A-50V from GAIA Converter is a high-reliability EMI input filter module designed for aerospace, defense, and other mission-critical DC/DC power applications. It suppresses conducted electromagnetic interference (EMI) on DC power lines, helping power converters meet stringent military and avionics EMC standards. The module supports a 9–50 VDC input range, delivers up to 2 A of continuous current, and is optimized for use with DC/DC converters up to 50 W. It features a compact PCB-mount package, low insertion loss, and reliable operation across a wide temperature range. Key Features Wide 9–50 VDC input voltage range Supports up to 2 A continuous input current Suitable for DC/DC converters up to 50 W Designed to reduce conducted EMI on power lines Compliant with MIL-STD-461 C/D/E/F EMC requirements Compliant with DO-160 C/D/E/F/G avionics EMI standards Compact PCB-mount module for space-constrained designs Operating temperature range of –40°C to +105°C RoHS compliant Ideal for aerospace, defense, avionics, and rugged industrial power systems #GAIAConverter #EMIFilter #PowerFilter #DCDCConverter #MILSTD461 #DO160 #AerospaceElectronics #DefenseElectronics #PowerManagement #EmbeddedSystems

Radiation-hardness-assured (RHA), high-accuracy remote and local temperature sensor • Radiation-hardened component • Space or Aerospace grade #commonpartslibrary #integratedcircuit #temperature #sensor

Radiation hardened, -15-V to 65-V, split-stage current sense amplifier with in-line filter option • Radiation-hardened component • Space or Aerospace grade #commonpartslibrary #integratedcircuit #currentamplifier #analogoutput

Radiation Hardened Mixed-Signal Microcontroller • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #microcontroller

High-resolution analog-to-digital converter (ADC) • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #ADC

Radiation Hardened 24-Bit 8-Ch Simultaneous-Sampling Delta-Sigma ADC • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #ADC

Radiation-hardened QMLV, 3-V to 7-V input, 6-A synchronous step-down converter • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #converter

Radiation-tolerant, 2-MHz, dual-output PWM controller with synchronous rectification • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit

Radiation-hardened, eight-channel, 50-kSPS to 1-MSPS, 12-bit analog-to-digital converter (ADC) • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #Data-Acquisition #ADC

Space-grade, dual, 32-V, 700-kHz operational amplifier • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #Op-amp

Radiation-hardness-assured (RHA), 3-V to 7-V input, 18-A, synchronous step-down converter • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #converter

Radiation-hardened QMLV, 30-V input, 2-A dual-output 1-MHz PWM controller • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #controller

Radiation-hardened QMLV, 2.5-V or 5-V shunt voltage reference • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit

Radiation-hardened QMLV, 4.2-V to 60-V input, 500-mA adjustable output linear regulator • Radiation-hardened component • Space or Aerospace grade #CommonPartsLibrary #IntegratedCircuit #regulator